Software Updates and News

[Support]

01-06-2014: Chinese Miracle-2 (Test Version) SPD/Spreadtrum v0.07 released
.SPD6530/SPD6531 support improved
- User Code read improved
- Safe Format improved

.SPD6530 Samsung support improved
- Improved RepairSecurity
- Improved UserCode reading

.General operations
- SPD6610/6620 re-named to SPD6610_ALCATEL
Supported phones: OT-316A/D/S, OT-1051D, OT-1060D, OT-1062, OT-1063
Repair Security not supported yet.
It still possible operate in "SPD6610" mode for Write Flash on other SPD6610/SPD6620
- FileInfo option added. Allow name files after read by Brand/Name/Languages
- Dual-Flash IC support for SPD653x series improved
- Dual-type Structure support improved
- CompileInfo extraction revised
- Initial Detection improved: SPD653x
- Documentation updated
- minor bugs fixed

[Support]

16-06-2014: Chinese Miracle-2 (Test Version) MTK/MediaTek v0.02 released
v0.02
.Improved USB detection (support for different USB driver versions)
.Improved Initial Boot
.Improved "User Code Reset" operation
.Improved File Verification (Read / Flash)
.Backup improved (Format FFS / Reset User Code)
.USB drivers included
.Some bugfixes

v0.01: Initial Test version
.Support interface: USB only (Test Version limitation)
.Support CPU: MediaTek 625A , MediaTek 6260
.Support FlashSize/Types: All 3/4/8/16 MiB
Operations:
.Read Info/Check
.Read Flash
.Write Flash
.Format FileSystem (Reset Settings)
.Reset UserCode (NO USER DATA LOST)
.Repair Security

[Support]

21-06-2014: Chinese Miracle-2 (Test Version) MTK/MediaTek v0.03 released
.MTK625A support improved
.Boot procedure fully revised
.FlashID database updated
.CodeDefine base updated
.Improved "User Code Reset" operation
.Repair security improved
.Some bugfixes

[Support]

04-08-2014: Main Infinity-Box "Calculator" v1.21 released
.Pantech-P9060-Pocket model supported
.Pantech-P9070-Burst model supported

[Support]

25-09-2014: Chinese Miracle-2 (Release) MTK/MediaTek v1.00 released
MTK Android Support (6572/6575/6577/6582/6583/6589/8312)

- New features and models support released :
.Support new CPU: MediaTek MT6572, MT6575, MT6577, MT6582, MT6583, MT6589, MT8312
.Support FlashSize/Types: eMMC only (up to 32 GB tested)

Operations:
.Read Info/Check
.Read Flash (FullFlash)
.Write Flash (FullFlash)
.Format FileSystem (Reset Settings): UDA (UserData), Cache

Other:
.Full firmware info extraction: version, model, branding and etc.
.Safe Format, backup/restore

- Improved
.MTK 625A: Format FS, Flash Write improved
.Safe Reset User Code (without data lost) improved for MT6260 and MT625A
.Flash File verify during Read/Write operation added
.Initial Boot improved
.Fixed some other minor errors

[Support]

27-09-2014: Chinese Miracle-2 (Release) SPD/Spreadtrum v1.00 released
.SPD6610/SPD6620 support released under test
.SPD6500 support released
.SPD6530 support improved
- User Code read improved
- Repair IMEI in flash mode released
- Repair NV, Repair FFS and Full Repair released
- Read, Write NV support released

.SPD6531 support improved
- User Code read improved
- Dual-Type structure support improved
- Repair IMEI in flash mode released
- Repair NV, Repair FFS and Full Repair released
- Read, Write NV support released

.SPD6530 Samsung support improved
- Improved RepairSecurity
- Improved UserCode reading
- New models added in list of supported: E1272, B310E
- Repair IMEI in flash mode released
- Repair NV, Repair FFS and Full Repair released
- Read, Write NV support released

.General operations
- "Write Security" in normal mode and service mode improved
- CompileInfo extraction revised
- "Smart Format" revised for 6610/6620 platforms
- Initial Detection improved
- FlashID database updated

.Other
- "Full Repair" (FFS + NV selected) mode will rebuild whole FFS and write default or user-defined NV
This option also can repair damaged phones by other tools
- "Use File" option allow select own NV or FullFlash file for NV extraction
- "Repair FFS" only selected - can fix all problems, when normal "Format FS" fail

[Support]

29-09-2014: Chinese Miracle-2 (Release) MTK/MediaTek v1.01 released
.MediaTek MT6261 CPU supported
Supported Operations:
Read Info / Check
Write Flash
Read Flash
Format FS
Repair Security

.MT625A, MT6260 support improved
Support latest FlashLoaders
Improved Format FS procedure

.Other
FlashID database updated
FlashLoaders updated
Some bugfixes

[Support]

02-10-2014: Chinese Miracle-2 (Release) RDA/Coolsand v1.00 released
.User Code read for RDA8853 series revised
.Format procedure revised
.Flash Partition detection improved
.FlashID database updated
.Firmware info detection improved
.Firmware integrity check improved
.Internal improvements

[Support]

10-10-2014: Chinese Miracle-2 (Release) MTK/MediaTek v1.02 released
MT6571 NAND/eMMC support, Generic 6571/6572 NAND support

MediaTek SP Platform:
Activated NAND support on following CPU:
.MT6571
.MT6572
Supported features:
.Flash Read
.Format FS: Cache, UDA, UDA+CACHE
.Read Info/Check

Activated eMMC support on following CPU:
.MT6571

Other:
.FlashInit: support some models with not active Preloader or erased Flash
.HSUSB: Init fast flashing / flash reading if phone have not active Preloader or Flash erased
.Format FS procedure improved
.Compile Info extraction improved
.FullFlash Dump Integrity check during Read/Write
.FlashID database updated
.SP FlashLoaders updated

MediaTek FP Platform:
MT6260, MT6261, MT625A: Format FS procedure revised
MT6260, MT6261: Empty (Blank) FlashIC support

[Support]

15-10-2014: Chinese Miracle-2 (Release) MTK/MediaTek v1.03 released
MediaTek SP Platform
Activated eMMC support on following CPU:
MT6592
Operations:
Read Info/Check
Read Flash
Read PatternLock

New feature supported: PatternLock Read
ADB Debug Enable IS NOT required
Root IS NOT required, No system modifications, No Warranty void
Supported phones (CPU):
MT6571 eMMC
MT6572 eMMC
MT6575 eMMC
MT6577 eMMC
MT6582 eMMC
MT6583 eMMC
MT6589 eMMC
MT6592 eMMC
MT8312 eMMC
Supported Android Versions: All 4.x.x (up to latest)

Other:
MT6583 support improved
MT6572 NAND support improved
MT6571 NAND support improved
MT6575 eMMC support broken in latest FlashLoaders, fixed
Initial boot revised (MT659x support)
FlashInit improved
Format FS procedure improved
Compile Info extraction improved
FlashID database updated

MediaTek FP Platform
MT6260, MT6261, MT625A: improved latest FlashLoaders support

[Support]

17-10-2014: Chinese Miracle-2 (Release) MTK/MediaTek v1.04 released
MediaTek SP Platform:
.PatternLock Reading improved
.MT6582 support improved
.MT6571 eMMC support improved
.FlashInit improved
.FlashID database updated
.Flash Read/Write speed improved

[Support]

24-10-2014: Chinese Miracle-2 (Release) MTK/MediaTek v1.05 released
Nokia 108/130/220/225 support

MediaTek SP Platform
Other:
FlashInit improved
Compile Info extraction improved
FlashID database updated

MediaTek FP Platform
New CPU/Models supported:
Nokia MT625A: Nokia 108 (RM-944, RM-945), Nokia 220 (RM-969, RM-970, RM-971)
Nokia MT6260: Nokia 130 (RM-1035, RM-1036, RM-1037), Nokia 225 (RM-1011, RM-1012, RM-1043)
Supported Features:
Check/Read Info
Format FS (Safe Format/Reset Settings)

Other:
Required to use special drivers for Nokia MTKx phones (uploaded on support)
Flash Read/Write is useless due security protection

[Support]

10-11-2014: Chinese Miracle-2 (Release) RDA/Coolsand v1.01 released
.Support for new FlashIc and CPU revision released!
Fidelix Series: 2Mib (Q16), 1Mib(Q8)
Winbond Series: 2Mib (Q16), 1Mib(Q8)
GigaDevice Series: 2Mib (Q16), 1Mib(Q8)
Micron Series: 2Mib (W16), 1Mib(W8)
EON Silicon Series: 2Mib (S16), 1Mib(S8)
.Improved connection for some 8851 revisions (GPS trackers and some other devices)
.Firmware reading (Infinity Format) improved for phones with non-standard structure
.Format procedure revised
.FlashID database updated
.FlashLoader Package Updated
.Firmware info detection improved
.Factory Sector Rebuild improved
.Internal improvements

[Support]

12-11-2014: Chinese Miracle-2 (Release) MTK/MediaTek v1.06 released
MT65xx Repair security support and more

MediaTek SP Platform
.Cross CPU/Flash file checking ( not allow cross-flash different firmware )
.Repair Security options activated
Tested and supported CPU:
MT6571,MT6572,MT6575,MT6577
MT6582,MT6583,MT6589,MT6592
MT8312 series
Support up to 4 IMEI repair

Other:
.Format FS procedure revised: backup/checking
.FlashInit improved
.Compile Info extraction improved
.FlashID database updated
.DebugLog reading enabled - for test/repair purposes

MediaTek FP Platform
.Repair Security operation improved
.Support for 4th IMEI is activated

Other:
Drivers updated
Some bugfixes and improvements

[Support]

Chinese Miracle-2 (Release) MTK/MediaTek v1.07 released

MediaTek SP Platform
.Universal NAND support for MT6571/MT6572/MT6575/MT6577 released *
.MT6573 support released (Read Info/Read Flash/Format FS)
.MT6575/MT6577 NAND support fixed
.MT6575/MT6577 eMMC support improved
.Repair Security improved

Other:
.Flash Pre-Erase revised
.Format FS procedure revised for eMMC phones ( simplified and removed extended settings ) **
.Added support for "Format FS" on non-aligned PMT phones ( Some MT6575 eMMC phones, like - Alcatel, Lenovo and some MT6573 NAND )
.FlashInit improved
.Compile Info extraction improved
.MT6575/MT6577/MT6573 NAND Compile Info extraction enabled
.FlashID database updated

MediaTek FP Platform
.Reset user code operation improved
.FlashId database updated

Other:
Some bugfixes and improvements

Notes :
* It is mandatory now make "Read Info" before other operations for NAND phones
** If need full rest ( "Wipe"/"Clean" ) - Set to "0" always. If need preserve some vendor apps - use software defined or own set.
If phone "hang" on logo - do format again with "0" settings.