Updates and News Infinity BEST

[Mohsin]

BEST Ver. 1.08.1 uploaded on support area.


- USB flashing improoved

Fixed bug in S60 usb flashing (like E71)
Fixed bug in old S40 usb flashing (like 6085)

- INI file updated (adeded new model)

BEST Ver. 1.08 uploaded on support area.

- USB flashing improoved

Updated flashloaders
Improoved RAPUYAMA/Rap3gV4/Broadcomm flashing
Improoved N96 flashing
Improoved S60 RAPIDO flashing
Improoved old S40 boot/flashing
Improoved S40 dead mode cntent writing especialy for old models
Improoved AfterFlash operations
Added Certificate (NPC/CCC/HWC) backup in USB normal/Dead flashing
Some cosmetic changes and bugfixes

- UFS support added

All service operations are supported
All user data operations are supported

- RPL read added for new BB5

Also can be used for dead-to-test mode without need select flash-files

- User Data operations improoved

S60 Symbian 9.3/9.4 phonebook write activated for some special cases
DCT4+ gallery/SMS read improoved

- Service operations improoved

E-series code reading improoved
FunLabel improoved
SelfTest improoved (especialy for new phones)
Improoved and rebuilded connection for DCT4+/Infineon/WD2 phones

[Mohsin]

BEST Ver. 1.08.1 uploaded on support area.


- USB flashing improoved

Fixed bug in S60 usb flashing (like E71)
Fixed bug in old S40 usb flashing (like 6085)

- INI file updated (adeded new model)
Report Post

[Mohsin]

BEST Ver. 1.09

USB flashing iproved
Certificate Write/Erase added for RAPUYAMA, BroadComm, RAP3Gv4
Blank pmm write activated via USB
Some bugfixes
Loaders updated
UFS support
UFS communication improved
"Check" option added
Flashing added (CMT/APE) Old Protocol
Cert Write/Read/Erase added
User Data operations improved
MMC password reading improved
WD2 PhoneBook operations improved
Read "To Do", "Notes" For S40 added
Read Calendar / Write Calendar - Select "evpkg" instead "event"
Added Write PhoneBook support for RAPUYAMA, BroadComm, RAP3Gv4 Series 40 phones
Fbus gallery reading improved
Repair options
Camera configuration read/repair (USB)
Read RPL now collect Certs and Flex keys
Erase Flash - S40 special - erase FS (USB/UFS)
RPL write improved ( NMP/Plain type support )
WD2 connection improved, Added "Force D2 mode"

[Mohsin]

BEST v1.10.1 uploaded to Support Area.
What new :
v1.10

USB flashing improved
- Loaders Updated
- CNT write for 7500 fixed
- Some bugFixes
UFS support improved
- Flashing improved
- Cert read/Write improved
- Content Write improved
- some bugfixes and stability improvements
User Data operation Improved
- SMS reading improved via Fbus
- Gallery backup improved via Fbus
Unlock/Repair
- SL1/SL2 Unlock Added ( Rap3Gv3, Rap3Gv2 and old RAPIDO hashes now)
Other
- Language Package Description added for S40
No need any ini-files or something else
Work for all current and upcoming s40 models
- Product Code write allow write "Word" Product codes
- Flash Settings added
Alow by "one select" configuring flashing options
Modes : Safe flash, Full Flash, PPm only, Dead-Test, Manual
- CERT operations, Low Format via USB - no need more check "Dead mode"
- AfterFlash - Product Code update added
- S40 Low Format - Added 2700c (RM-561), 7500 (RM-249)
- some bugfixes and cosmetic changes from previous version



v1.10.1

UFS flashing improved
S40 PhoneBook reading improved
Log reading added (allow use logs via usb too for future purposes )
FlashSetting improved
Ini updated
Some minor bugfixes

[Mohsin]

BEST v1.12 uploaded to Support Area.
What new :

Unlock/Repair
- adedd stendalone SDD Repair
- adedd stendalone SX4 Auth
Other
Some minor bugfixes


Happy NEW YEAR !!!

[Mohsin]

BB5 Easy Service Tool [BEST] v1.13 released:

- SL3 unlock codes calculation released in FREE, UNLIMITED, STANDALONE method (use your own PC for calculation)
* FREE, UNLIMITED, STANDALONE for all Infinity BB5 Easy Service Tool [BEST] users
* You must have PC with required hardware for calculation, see hardware requirements below

- Nokia Infineon CPU based (X-Gold 102/110) models supported
* SP-Unlock (Network/Provider unlock) via FREE, UNLIMITED, STANDALONE unlock method (use your own PC for calculation) 1-st In Word
-- FREE, UNLIMITED, STANDALONE for all Infinity BB5 Easy Service Tool [BEST] users
-- 1280, 1616, 1800 models was tested and unlocked well
-- You must have PC with required hardware for calculation, see hardware requirements below
* UFS interface supported
* Flashing: dead mode, normal mode, upgrade and/or downgrade firmware
* Service functions: factory defaults, pm read/write, self-test

- User Data operations improved
* S40 PhoneBook operation improved, read operation improved
* CSV read operation improved, minor bugs fixed
* S40v6 phonebook reading improved
* S60 CSV/VCF operation improved

- Support area improvements
* Support area mirror servers selection released, new support mirror servers will be started soon

- UFS flasing improved
* minor bugs fixed

- Other improvements
* DCT4+ and Infineon based models: reset user code operation fixed
* New Camera Configuration supported
-- NI00CS0000040C213402
-- NI00CS00000401022E05
* RPL read operations improved, especially for dead-to-test mode
* Ini files updated, new models added
* minor bugs fixed

- Hardware requirements for unlock calculation:
* ATI Radeon HD 5xxx or Nvidia CUDA graphic card

[Mohsin]

BEST
Ver. 1.14

- Added standalone Sl1/Sl2 simlock repair
- Improved Infineon Unlock ( C1-00 supported/tested )
- Added S40 (all generations : 2,3,5,6) SMS/MMS reading/Restoring !!! Unique
SMS/MMS can be readed as text, or a backup package and restored after flash/reset/erase
Supported USB for now only, in next versions will be added FBUS support too
- Fixed some model detection/operation select bugs for BB5 (repair/unlock not enabled)
- USB flashing fixed
- UFS support improved
- fixed sw version check
- other small bugfixes
- Nokia Infineon support improved
- Infineon flashing improved
- Infineon "check" improved
- After flash options added (chk/read, FactorySet)
- Some improvements in phone connection/detection
- Added some hints for flashing/booting/unlocking problems
- "Check" option improved for BB5 (USB/FBUS)
- Some cosmetic changes

[Mohsin]

BEST v 1.14.1

- Improved Infineon support
- Added COM port flashing support (dead/normal)
- Added Info Read option Infineon/Dct4
- Some improvements
- USB Flash Loaders updated
- Some internal bugfixes
- Ini updated - revised and added new models
- LBF log reading for SL3 fixed

[Mohsin]

BEST v1.15

- Added Infineon XG213 support c1-01, c1-02 and same

USB flashing (Dead/Normal)
Allow Custom flashing too (only mcu, only ppm, only cnt)
Dead To Test
Service operations (all, except rpl read/write, ask reading)
UserData operations
PhoneBook Read/Write (cross-support for all S40)
Calendar Read/Write
SMS Read/Write
Gallery read
MMC Pass read
Other
FunLabel supported too
LifeTimer supported too

- USB flashing Improved

CNT check fixed (8800arte bug)
CNT check in dead mode improved
no more errors with 3110/6300 and same
some improvements in flashing at all

- UFS flashing improved

Fixed MMC CNT flashing(6500c/7900/8800)
Improved stability

- Service operations improved

Camera Configuration read/write also supported new CamTypes (x3-02 and same)
New camconfigs added
LifeTimer operations improved
Some improvements at all

- UserData operations improved

Added PhoneBook Read/Write support for S40 T&T (X3-02,C3-01...)
Fixed PhoneBook reading for some s40 (c3 and same)
Improved Gallery backup for new S40 (Infineon213 & s40 T&T)

- Ini Updated (added and fixed some models)
- Loaders updated (Fbus/Usb)
- Added CNT check option (for on/off Content check in Dead USB flashing)
- Some cosmethic changes

Some important info:
Infineon 213

MCU+PPM flashing doesn't kill user data
For dead (full state) - flashing, if device is not recognized (unknow device in Windows) - need reinsert battery, when cable inserted
For dead-to-test need select Dead-to-test (In FlashSettings tab)
Flashing tested on C1-01 and C1-02 (RM-607, RM-643)
Cross-Flashing from models - Kill Imei and Locks. Reflash back fix it

[Mohsin]

BEST v1.16

- RPL writing rebuilded

Added PA_SL30 Simlock Writing (Under TEST)
Support Factory RPL and BEST RPL backup
some bug fixes and improvements

- DCT4 support improved

Added Standalone DCT4+ ASIC11 Unlock/Relock/Simlock repair

- Other

Unlock counter reset added
UFS flashing stability improved

- Some improvements at all
- Ini updated and corrected for some models
- Some cosmetic changes

[Mohsin]

BEST v1.17

- BB5 support improved

USB loader updated to latest (v11.4)
Service operations improved
PA_SL30 Simlock Writing improved
(Tested on ALL current SL30 phones)
Added "ССС/HWC Restore"
Restore CCC/HWC certificates in phone
Automatically or in Manual mode
UFS flashing stability improved
Added "Full Erase" option
Allow fully erase phone, if needed
Support FBUS/USB
USB - RAPU/RAPV4/BCM phones
Support CMT (Nor/Nand) only for Now
Easy and one button solution
No more needed Erase Files
No more problems with "not fully" erased phones
Cam Check/Repair, Store Camconf activated via Fbus
Added SD/SLD/SECUTIRY Fast check
Added Manufacturing date edit
Added FunLabel Editor option (S40, USB/FBUS)
Allow Edit FunLabel Data in internal editor
Write/Save labels

- DCT4 support improved

Service
Improved operations with DCT4 phones
Added Camera Configuration Check/Repair, Store CamConf
Other
Camera Configuration Package updated
(Many configs added for DCt4 and Latest BB5 phones)
CCC/HWC rpl collections added
PM(Tune SX4) base updated

- Some bugfixes
- Some improvements at all
- Ini updated and corrected for some models
- Some major cosmetic changes

[Mohsin]

ChangeLog from 1.18 to 1.18.5

BEST v1.18
Code:

- JAF support improved
- Fixed some box firmwares support
- Fixed booting
- OLD Protocol features for BB5 :
*Flash support added
- CMT/APE phones supported
- With APE-phones now can work not properly
Models like - E65,N70,N72,N96,N75,N82,N91,N95,E90 and few others
*Certificate support added
- Read/Write flash certificates (CMT only)
*Check option activated
- NEW Protocol features for BB5 :
*Flash support added
- CMT phones supported
*Certificate support added
- Read/Write flash certificates (CMT only)
*Check option activated
- UFS support improved
- Added key reading for RAPU/RAP4 phones
- Improved flashing stability for MMC phones (7900 and same)
- Other
- Some bugfixes at all
- some cosmetic changes

Other Info -
*Support all JAF box FW versions
*New Protocol added Especially for New RAPIDO phones
Other can be fully serviced via USB (even Full Erase)

BEST v1.18.1
Code:

* JAF booting improved
* Writing Certificates on New Protocol improved
* Flashing on New protocol improved
* Unlock/repair functions for rapu/rap4 improved
* Added check PA version ( USB/JAF/UFS , depend on phone/protocol )
* Some bugfixes

BEST v1.18.5
Code:

* Server operations improved (Added time calculations)
* JAF APE flashing improved
Now work Ok with APE phones (tested on N96, N70)

- Other
* Use good Fbus cables for UFS/JAF for prevent flashing/booting erros

[Mohsin]

BEST v1.19

- USB flashing improved
- Activated MassMemory flashing (C7/N8 and same)

- UFS support improved
- RPL Write/Read improved
Added Read/Write APE certificates
- Improved APE flashing
- Some bugfixes

- JAF support improved
- RPL Write/Read improved
Added Read/Write APE certificates
- Improved APE flashing (OLD protocol)
- Improved CMT flashing (NEW protocol)
- Added "Flash Erase"
- LowFormat for S40 Activated
- Some bugfixes

- UserData operation improved
- LowFormat improved
(Recover phonebook/mmc password from dead phone)
Added 6500s (RM-240)
Added 5310xm (RM-303)
- S40 PhoneBook engine rewriten
Support for all s40 generations improved

- Unlock/Repair operations improved
- Fixed Rap4 Unlock
- Fixed Rap4 SDD repair / SX4
- Now all Rap4 phones can be uploaded to server

- Updated CCC/HWC, PM collection
- Some bugfixes and cosmetic changes

[Mohsin]

BEST v1.20

- USB flashing improved

Loaders updated to v 11.10.0
MassMemory flashing improved
Added more hints and info
Some bugfixes and improvements at all

- JAF support improved

Added DCT4+ support
Flashing
Check
Added some service operations (DCT4/BB5)
AutoDetect phone
PM read/SelfTest/FactorySets/Read info
Added afterflash operations
Some bugfixes

- UFS support improved

Improved stability on service operations
Some bugfixes

- Service operations improved

Improved RPL operations (USB/FBUS)
Updated ccc/hwc,tune,camconf base
Some bugfixes

- Some GUI changes
- Server operations improved

New version must be used for upload jobs and other operations
Added support for upload job to server from *.bat file for ighashgpu
Added save *.bat file for oclHashcat format for LBF

- ini updated

[Mohsin]

2011-05-25: [BEST] v1.22 released
- USB flashing improved
* Loaders updated to 11.16

- Added extended USB RAPIDO support
* Full Erase
* Reflash (even fully erased - Cold Flash)
* RPL Write (NPC/CCC/HWC too)
* Dead-to-Test (via Read RPL)

- some bugfixes and improvements

- Infineon flashing improved
* Added X1 support (flash/service/unlock)
* Some bugfixes

- Service operations improved
* Added SX4 support (Server-based)
* Support USB/FBUS
* Only original SX4
* NCK enter fixed on some models

- JAF support improved
* RPL write improved (BB5 new/old)
* Activated Repair SL,Repair SD,Unlock (on supported models)
* DCT4 flashing improved
* Some bugfixes

- UFS support improved
* APE flashing fixed

- Some bugfixes
- Ini updated