Software Updates and News

[Support]

Infinity Chinese Miracle-2 #CM2MT2 v2.40

General:
FireFly : Protocol updated
FireFly : Activated new operations
1. Firmware Read
2. Firmware Write
3. MemoryTool : EXTCSD Read
4. MemoryTool : EXTCSD Write

FormatFS:
Smart Reset updated: New types supported
Smart Reset updated: Android 13 specific changes

Firmware reader:
Firmware Read activated in FireFly mode
Android 13 support improved [under test]

Firmware flasher:
Flasher Engine updated : [LUCI], [RAPH] and [LEGACY] protocols updated
Firmware Flashing activated in FireFly mode

Service:
Identify : Now read active system info if device belong to AB
BootLoader: Unlock/Lock revised in FireFly and MTK mode

MemoryTool:
New Operation : EXTCSD read - Allow read EXTCSD config from eMMC. Made default at boot also
New Operation : EXTCSD write - Allow write EXTCSD config in eMMC
Both operations supported only in FireFly mode for now!

The Rest:
Loaders updated
Previous versions of loaders partially moved to CM2MT2 boot-pack
CM2MT2 boot-pack v2.40 or newer should be installed to get latest loaders
Log output management updated
BugFixes and minor updates

Required Dongle firmware version: 0154

https://infinity-box.com/news/?r=4288

[Support]

#CM2SP2 Diag Helper tool v1.05

Use it in case of DIAG/SVC mode failure with latest SPD devices and for Wipe, User Data and Security Code Reset
[+] Connection protocol updated
[+] Minor User Interface changes with Snap|Screenshot button and log files easy access
Dongle is not required, just run and use for free

Download here https://infinity-box.com/support/

[Support]

Infinity Chinese Miracle-2 #CM2MT2 v2.41

General:
- FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin
- FireFly mode operations updated such as bootloader unlock etc.
- Many internal changes

Image management:
- Preloader parser/converter updated
- Preloader/EMI open dialog updated for bin/img files
- DA, Cert, Auth, Preloader load/verification method updated

User Interface:
- log management engine updated
- software messages revised

Download here https://infinity-box.com/support/

[Support]

Infinity Chinese Miracle-2 #CM2MT2 v2.42

General:
- Maintenance release
- Memory management improved
- Many internal changes
- Boot time flow process updated
- Boot time error handling improved

User Interface:
- flash chip info output revised
- software messages & hints updated

Dongle firmware version required: 0154

Download here https://infinity-box.com/support/

[Support]

Infinity #CM2SP2 boot-pack v1.16 with updated loaders

[+] Dexp
[+] iTel
[+] Infinix

[Support]

Infinity #CM2SP2 boot-pack v1.19 with updated loaders

Blu, Condor, Disko, Hisense, Huawei, Infinix, iTel, Lenovo, Mobicel, Realme, Reeder, Safaricom, Samsung, Symphony, Tecno, Vodafone, ZTE

[Support]

Infinity #CM2SP2 boot-pack v1.20 with updated loaders

Ace, Blu, Digma, Fly, Gionee, Hisense, Incar, Infinix, Irbis, iTel, Just5, Lava, Lanix, Lenovo, Maximus, Mobicel, Realme, Smooth, Symphony, Tecno, Tigo, Vankyo, ZTE

[Support]

Infinity Android Service Tool #AST v1.04

- Connection methods updated for ADB and Fastboot
- Latest dll's included in package
- Log engine updated
- Stop/Logs/Snap buttons
- gui updated
- user interface save/restore options
- aplication list save on Identify
- Device messages output method revised
- Hints and error messages updated
- "Uninstall Apps" for batch processing by apk list loaded from text file
- "Pixel" bypass method
- Many internal changes

[Support]

Infinity Chinese Miracle-2 #CM2MT2 v2.43

General:
- Device/Firmware detection method updated
- Boot process flow slightly changed
- Boot/Shutdown process updated
- Partition table analyzer rebuilded (primary/secondary)
- Service operations updated - red/orange state and bootloader unlock
- Bootloader lock/unlock process flow updated
- Service Report revised
- FileSystem type output revised
- Device handling Strategy type output revised
- scat load & emi management for "flash write" revised
- MemoryTool operations revised and bugs with menu selection fixed
- Security values processing updated
- META mode output revised
- Preloader parser revised
- EMI handling for legacy devices fixed
- Internal changes - memory management and more

User Interface:
- FLASH/META mode selection changed
- DA Protocol selection changed
- Software messages & hints updated

[Support]

Infinity #CM2MT2 v2.44 Infinix/Tecno no need TP and more features

General:
- Device info detection revised
- EMI processing for legacy hardware (f.e. MT6580) revised
- EMI database rebuilded
- Meizu operations revised
- New feature: Brom ON/OFF - allow enable BROM mode and allow do extended services such as:
All FireFly Features: Boot unlock, testing, service etc.
All FireFly DA features: Boot unlock, RPMB, service and other
NOTE: Read BROM On|Off manual
- Display partition/image size during flash Read/Write
- Device information parser updated
- DA selection mode revised
- DA information/hints displayed on selection for number of loaders
- DA config database updated
- Red|Orange state methods revised
- Incompatible image confirmation during Flash fixed
- Simlock methods output updated
- Format methods output updated
- Infinix and Tecno without testpoint/disassembly included MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
- Internal changes - memory management and more

MemoryTool:
- Bulk Read/Write operations updated: selection and Read/Write path sync
- Read/Write file path handling method on file select/cancel revised
- Messages & errors|hints updated

Backup:
- Backup restore process updated with any record On|Off selection
- Select All/None items by right mouse click

User Interface:
- Startup window position config revised
- Software messages & hints updated

https://infinity-box.com/news/?r=4309

[Support]

Infinity #CM2SP2 boot-pack v1.22 with updated loaders

Alcatel/TCL, Blu, BQ, Hisense, iTel, G-Tab, Lenovo, Prestigio, Realme, Reeder, Safaricom, Symphony, Tecno, Wiko, ZTE

[Support]

Infinity #CM2MT2 boot-pack v1.41 with updated loaders

Ant, Oukitel, Symphony and `generic` structure updated

[Support]

Infinity #CM2MT2 v2.45

- startup process and external dll's handling method revised to avoid 0x0c000007b issue with damaged libusb installation
- boot process revised
- boot/sla error handling method changed
- flash read process revised: luci handling updated and more detailed output
- EMI database structure updated
- MemoryTool file path handling updated, non-existent path check
- external dll's moved to /lib/
- external dll's verification method updated
- separate fscard.ini file is not required any more
- strategy detector updated: honor
- "Restore backup" process revised, issue with filelist fixed
- flash writer display source file size instead of partition size
- flash reader: [Create SCAT] option
- gui resize bug fixed
- auto-update check method changed to once per day
- messages and hints updated
- minor ui changes
- many internal changes and improvements

NOTE: install latest CM2MT2 boot-pack for best results

https://infinity-box.com/news/?r=4312

[Support]

Infinity Android Service Tool #AST v1.06

- startup process and external dll's handling method revised
- external dll's moved to /lib/
- external dll's verification method updated
- packed firmware files handling updated
- remote files verification method changed
- separate fscard.ini file is not required any more
- auto-update check method changed to once per day
- minor ui changes
- many internal changes and improvements

https://infinity-box.com/?r=100226

[Support]

Infinity #CM2SP2 boot-pack v1.23 with updated loaders

Accent, Advan, Blackview, BQ, Condor, Gionee, Hisense, Huawei, Hurricane, Hyundai, iGET, Infinix, iTel, gplus, Lanix, Lava, Lenovo, Mobicel, qctech, Realme, Symphony, Tecno, Umidigi, Walton, WE, ZTE