Software Updates and News

[Support]

Infinity-Box [BEST] NK2 v1.13 - Universal Flasher/Unbricker, more Forensic and other stuff !

MTK SP tab
- Flasher engine updated
Allow unbrick/repair almost all SW-related issues during flashing from now ( specially A/B devices )
Fixed memory partitioning issues on fresh devices
- Reset Settings/Format FS updated
- Safe UserData flashing feature updated
- Pre-Erase option can be activated/de-activated depend on user need

MTK FP tab
- Dead mode flashing revised ( incorrect identification during flashing semi-dead device )
- Firmware reader engine updated
- LangPack info extractor updated
- Forensic engine updated
Nokia 106 PhoneBook extraction activated/de-activated
Universal Gallery extractor activated
*Allow extract : Photos ( if device have camera ) , Audio records , Browser BookMarks and History ( Built-in MTK and Opera Mini supported )
*Support all existing MTK Feature devices, made by Microsoft and HMD Nokia
*Support Direct (from phone) and Dump (from file) mode
Phonebook extraction updated

SPRD FP tab
- FullFlash reading optimized
Unfortunately, all dumps, made by v112 are not usable. Please, repeat reading with new version, if you need get LangPacks.
- Flash Engine updated
- NVRAM verify and check revised

Other
- Some bugfixes and changes

Support
- All latest firmwares can be found on support!

[Support]

Infinity-Box [BEST] NK2 v1.14 - Nokia 210 (2019) Full support activated

Next revision of Nokia 210 (2019) are supported:
Nokia 210 (2019) : TA-1139

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )
> Backup security
> Restore security
> Repair security ( via SWP )
> SP unlock ( via SWP )
> Complete repair ( via SWP )
> Forensic ( Gallery/Browser History/Browser BookMarks )

*SWP feature allowed due to Nokia security flaw, made in Nokia 210 and affect this model only for now.
*CROSS-SWP between affected models not allowed for now!

- Base
Loader database updated
Bugfixes and minor changes

- Support
Some firmwares for Nokia 210 can be found on support now

[Support]

Infinity-Box [BEST] NK2 v1.15 - Nokia 1 Plus support

Nokia 1+ (ANTMAN) supported ( TA-1111, TA-1123, TA-1127, TA-1130 )

- Identify
- Reset Settings / Format FS / Reset FRP
- Firmware Flashing

Other
- FlashLoader datbase updated
- Some bugfixes and changes

[Support]

Infinity Chinese Miracle-2 MTK/Mediatek v2.06 - AutomaticBoot selection and other stuff

To use this software Smart-Card firmware version should be 0137 or higher.

Base:
Base - Secure boot - Automatic boot selection feature released
Base - Secure boot: Allow automatic detect boot configuration for SECURE enabled chips
Base - Secure boot: Following secure configurations are supported: SBC, SLA, SDA and their combinations
Base - Secure boot: Following secure configurations are NOT supported: ARB and combinations with it
Base - Secure boot: Supported CPU: MT6572, MT6580, MT6582, MT6589, MT6592, MT6735, MT6752, MT6753, MT6755, MT6757, MT6763, MT6771, MT8127, MT8135, MT8167 ( list of tested )

Base - ModelBD - Manual Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use

Base - ModelBD - Automatic Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use ( press and hold LCTRL key during press IDENTIFY )

Base - FlashLoader line v1904 tested and supported. Older lines (6592/6595 and similar) still unstable
Base - FlashLoader line v1912 tested and supported. Older lines (6592/6595 and similar) still unstable

FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised
FWFlasher - MT6771/6765 support revised

FWReader:
FWReader - More types supported for safe read
FWReader - Info reading improved
FWReader - packing revised
FWReader - more accurate data verification

Service:
Service - Format FS revised
Service - NVRAM module updated

Platform:
Platform - MT6765/MT6762 support optimized

Loaders:
LoaderDB - Lot of new agents included (Tecno, Tesla, Wiko and other)
LoaderDB - Included MT6570 "DRAM Fixed" agents used to revive devices flashed with wrong preloader ( so called "Doogee X10 bug" )

Other:
Other - Many different small changes and fixes
Other - SaveUser Configuration option can be found in FILE system menu. Work only in MANUAL mode !
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - Preloader tools, Preloader init and other related stuff updated
Other - Partial LEGACY NAND support - optimized boot. Identify work complete if BMT autoset work correct

Info: Automatic Boot option can be switched off/on in settings menu
Info: Automatic Boot work in "SelfLearning" mode - once learned it will boot this type/device line after automatically
Info: Automatic Boot option support and learn different modes ! Make sure if device used DIFFERENT settings - learn all of them !
Info: MT6570 Fixed NAND DA can be used for flashing FACTORY firmware and INIT PRELOADER. For FW read and all other things - use INFINITY ones !

How to use AutomaticBoot select, User DB, Auto DB - https://www.infinity-box.com/support/?r=100072

[Support]

Infinity-Box [BEST] NK2 v1.16 - Android 9 firmwares support, model finder

- MTK flash engine updated ( Feature Line )
- MTK flash engine updated ( SmartPhone Line )

- Android 9P firmwares can not be flashed in Nokia 5.1/3.1/3.1+ , fixed
- Model selector over TA/RM identifier activated. Double click on model to open required tab

- Base
Loader database updated
Bugfixes and minor changes

- Support
New firmwares can be found on support for all supported lines

[Support]

Infinity Chinese Miracle-2 SPD/UniSoc - CM2SP2 - v2.00 r1 released

- Supported platforms:
SpreadTrum:
SC5735
SC7715
SC7731C, SC7731G
SC9820
SC9832A
SC9850
SC9853i

UniSoC:
SC9820E
SC7731E
SC9832E
SC9850K
SC9850KH
SC9863

- Support Generic (Non-Secure), SecureV1, SecureV2 devices
Android 4/5/6/7/8 versions

- Supported operations in initial release:
Identify ( include complete device info )
Reset Settings / Format FS
Reset FRP
Firmware flashing ( Safe Flash, Repartition, HW verify, Flash customizing )

- Database:
Basic wide-range bootloaders for common devices types
Also lot of other pre-defined models already included in database

- Extra:
Feature: Completely safe flash engine ( allow flash SimLock / Signed / and other devices, recover critical data from semi-damaged NV )
Feature: Automatic ModelDB update at new model detection ( loader select, pac load etc. )
Feature: Customized boot option and sources: Manual PAC, Manual FDL pair with automatic details detection, Pre-defined DB, Self-Learning DB
Feature: Complete Firmware Info detection at FW load with extended info

[Support]

Infinity Chinese Miracle-2 SPD/UniSoc - CM2SP2 - v2.00 r2 released - More models and features

- Core
Protocol updated
Connection problems with older drivers revisions fixed

- Service
Identify - Read Security info option enabled
> Read and verify NV state, show security info
Identify - Userdata state detection optimized
Format FS - New FMT mode - Forced. Use it if you have problems with default ones. FRP NOT in touch on that mode!

- Flasher
Optimized PAC handling
Some old device types flashing fixed ( SC7715/SC7731 )
NVManager updated - optimized verification, optimized data recovery in case of NVM damaged, complete security info display
Forced NVM update option activated ( complete NV rewrite with all calibration data destroy, if device NVM completely damaged )

- Database:
New generic boots included for SC9850KA, SC9850, SC9832E, SC9820

- Other
Bug fixes and some changes according users requests

[Support]

Infinity-Box [BEST] NK2 v1.17 - All New and Old HMD support activated

HMD N 1 **
TA-1060, TA-1056, TA-1047, TA-1079, TA-1066

HMD N 1 Plus **
TA-1130, TA-1123, TA-1111, TA-1127

HMD N 2 *
TA-1035, A-1029, TA-1023, TA-1011, TA-1007

HMD N 2.1 *
TA-1086, TA-1084, TA-1092, TA-1093, TA-1080

HMD N 2.2 **
TA-1183, TA-1184, TA-1188

HMD N 3 **
TA-1028, TA-1038, TA-1032, TA-1020

HMD N 3.1 **
TA-1074, A-1070, TA-1063, TA-1057, TA-1049

HMD N 3.1 Plus **
TA-1125, TA-1124, TA-1118, TA-1117, TA-1115, TA-1113, TA-1104

HMD N 3.2 *
TA-1154, TA-1156, TA-1159, TA-1161, TA-1164

HMD N 4.2 *
TA-1133, TA-1149, TA-1150, TA-1152, TA-1157

HMD N 5 *
TA-1044, TA-1027, TA-1024, TA-1053

HMD N 5.1 **
TA-1088, TA-1081, TA-1075, TA-1061

HMD N 5.1 Plus **
TA-1120, TA-1112, TA-1108, TA-1105, TA-1102

HMD N 6 *
TA-1033, TA-1039, TA-1025, TA-1021, TA-1000, TA-1003

HMD N 6.1 *
TA-1043, TA-1016, TA-1045, TA-1050, TA-1054, TA-1068, TA-1089

HMD N 6.1 Plus *
TA-1116, TA-1103, TA-1083

HMD N 7 *
TA-1041

HMD N 7.1 *
TA-1100, TA-1096, TA-1095, TA-1085

HMD N 7 Plus *
TA-1062, TA-1062, TA-1055, TA-1046

HMD N 8 *
TA-1012, TA-1004, TA-1052

HMD N 8.1 *
TA-1128, TA-1121, TA-1119

HMD N 8 Sirocco *
TA-1042, TA-1005

HMD N 9 PureView *
TA-1094, TA-1087, TA-1082

HMD N X71 *
TA-1172


For now the next features are supported:
> Firmware flashing ( Factory / BEST firmware packages )
> Format FS / Reset Settings
> Reset FRP
> Identify

Info marks:
* - Device require Remote Authentification Server ( credit cost - 0 for now )
** - Device supported / supported already STANDALONE

- Base
Support for old HMD line over RAS for QCOM models
Support for new HMD line - WT/HQ activated - 2.2, 3.2, 4.2 ( over RAS for QCOM models )
Loader database updated
ModelFinder updated
FileSystem toolkit updated, changed FormatFS for all SP lines
SW/HW/Cross-avoid check activated for BL update mode
Bugfixes and minor changes

- MTK SP
Updated loader database
Boot log now show also ARB state and other service info
Automatic backup for critical partitions activated

- MTK FP
SWVersion check revised
FlashEngine updated
FileSystem (Forensic) engine updated

- SPD FP
Backup / Restore security activated
FlashEngine revised

- Support
Some firmwares for wide range of QCOM/MTK HMD Smartphones can be found on support area

[Support]

Infinity-Box [BEST] NK2 v1.18 - important fix for v1.17

You can download complete v1.18 package as well as v1.18-exe-only if you have v1.17 installed

- Base
Flash engine revised ( N 2/2.1/5/6 flashing fixed )
Format FS / FRP reset revised

Other minor changes and fixed

[Support]

Infinity Chinese Miracle-2 SPD/UniSoc v2.01 - UniReader Edition - Android 4-5-6-7-8-9

As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

- Core
Protocol updated
Alternate protocol support activated ( automatic switch depends on model )

- New Self-Learning engine for semi-supported devices !
In case of problem with device servicing - during identify session SW will make new database record
That record available from boot menu after that to use exactly for this device line
That will fix any incompatibility loader <-> device problems and remove any servicing issues

- Service
Identify - better structure detection, simlock state info
Identify - Userdata state detection optimized
Format FS - Forced Format revised

- Flasher
Optimized PAC handling
Optimized older device line support ( Sc7715-Sc9832 from SPRD )
NVManager updated - Identify, Security swap and verification, Recovery mode
Activated flashing of own FlashFile format files made by FWReader

- Firmware Reader activated!
Allow read ANY security level phone from Spreadtrum or UniSoc on almost all Android OS versions!

Support OLD SPRD line devices:
SC7715, SC7731, SC9820, SC9832, SC9850 and their revisions and modifications
Plain, Signed and RSA-enabled
Android 4, Android 5, Android 6, Android 7 lines are supported (higher versions were NOT released from SPRD)

Support NEW UniSoc line devices:
SC7731E,SC9832E,SC9863,SC9850,SC9820E and their revisions and modifications
Plain, Signed and RSA-enabled
Android 6, Android 7, Android 8, Android 9 lines are supported (lower versions were NOT released from UniSoc)
Arch32/Arch64 support

Support "SPRD"-like chipsets with Intel X86 arch
SC9853I and its modifications and revisions
Plain, Signed and RSA-enabled
Android 6, Android 7, Android 8 lines are supported

It is the only existing and complete solution

Additional info:
Firmware use OWN format.
Firmware is COMPLETE one, allow to fix any sw-related state including FlashChip erase, change or complete SW rebuild
Unlike older SWReader version used in V1 line there is no need in bunch of additional re-connection operations or to make something special.

- Database:
New generic boots included, some boots updated

- Other
Bug fixes and some changes according users requests

- Known issues:
[1] UniSoc line is SLOW. It is VERY SLOW! Unlike SPRD ones, it consume x4-x5-x6 more time comparing to old SPRD.
We made almost all possible for now to speed it up. And that is limit for protocol.
In near time it should be some speed up to 20-30% but this solution still require some more time.
[2] UniSoc devices with ARB active may dead on wrong SW version flashing at Android 9 line.
We checking that issue and collecting samples. According users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] Sw will try always, in any case retrieve all device-side keys/security during flashing and identify, if they exists inside.
Much backups better, that nothing. Actual for devices with paired/signed security and/or active keybox.
[5] NAND devices on SC9820,SC7715,SC8830 not supported yet for FW reading

[Support]

iosFileUploader v1.09 released
- internal improvements, upload engine updated

https://www.infinity-box.com/support/?r=100020

[Support]

Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
UniSoc: SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G:

Updated LOD tools ( Factory LOD support revised )
UserCode reading improved

Spreadtrum/UniSoc SC6530/6531/A/C/D/E:

New feature activated: Complete identification
During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )
Readout naming changed to DeviceInfo details instead of flash size/flash vendor

Repair security revised
Database revised, loaders updated ( extended range of supported SC6531EFM devices with 4-8MB flash )

Spreadtrum/UniSoc other:
Protocol updated, error codes handling activated
SC6531 with 16MB flash support revised
FTM during flashing now make DNVM clean, FS clean and structure verification
UserCode reading improved
Some other bugfixes and small changes

Info:
"HardLock" detection feature for SP-locked device activated under test

https://www.infinity-box.com/support/?r=100086

[Support]

Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features

- Core
Protocol updated
Error handling, error explanation and hint module activated
SC9850 and similar devices WRITEFLASH security disable option enabled
> Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error)

- Android 9 line devices tested and supported for Firmware reading!
- Self-Learning mode for Firmware Reader activated!
That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware
Just follow the SW instructions if need and you don't need to wait updates for latest devices

- Service
Security - NVM reading feature activated
> Allow read complete device factory calibration data, security items
> Save also modem info for cross-writing NV between different models
Security - NVM writing feature activated
> Allow restore / rewrite device factory calibration data, security items
> Allow use different modes during restore:
> 1. SWAP ( safe mode ) - if security alive SW will try swap security data
> 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone
Identify - better structure detection
Identify - BaseBand deep identification
> Allow read complete BaseBand info and read "MODEM TAG"
> Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG
> TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG
UserData - PrivacyLock read feature activated
> Allow read PRIVACY lock password and details
> Support DIFFERENT models made by OEM "TRANSSION"

- Flasher
Optimized speed ( from 5% to 15% for UniSoc line )
Optimized PAC handling
Optimized older device line support ( SC7731GEA and similar from SPRD )
NVManager updated - Identify, Backup, Security swap, Verification
Activated new option - Re-Sparse.
> Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices
> Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing

- Firmware Reader
Android 9 line support finished, completely tested and confirmead as working
Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now
> FOTA, vendor-specific features and rest stuff has been tested

- Database:
New generic boots included for SC7731C/G
New generic boots included for SC9863
ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others

- Other
Bug fixes and some changes according users requests

- Known issues :
[1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD.
[2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line.
We are checking that issue and collecting samples. According to users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD
[5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading

https://www.infinity-box.com/support/?r=100087

[Support]

Infinity-Box [BEST] NK2 v1.19 - New models and features

HMD Nk 105 (2019) King
Nk 105 - TA-1174, TA-1203
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode

HMD Nk 110 (2019)
Nk 110 - TA-1192
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode

HMD Nk 6.2 Starlord
Nk 6.2 - TA-1187, TA-1198, TA-1200, TA-1201
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

HMD Nk 7.2 Daredevil
Nk 7.2 - TA-1178, TA-1181, TA-1193, TA-1196
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- BL
Fixed Nk 2.2 flashing, Format FS, Reset FRP

- MTK SP
Updated loader database
MT6761 support activated ( Nk 2.2 line ) in standalone mode

- MTK FP
FlashEngine updated
FileSystem (Forensic) engine updated

- SPD FP
FlashEngine updated
Nk 105, Nk 110 support activated ( partial )

- Support
New firmwares for supported models can be found at support area

https://www.infinity-box.com/support/?r=100088

[Support]

Infinity-Box Data Explorer v1.00 - Initial Release

- Data extraction based on full reconstruction of file system

- Initial features
1. Phonebook records extraction from dump
2. Phonebook records export to TXT, VCF formats
3. Memory type auto detection (Manual selection also supported)
4. File system parameters (sector size, header type) auto detection (Manual selection also supported)

- Supported devices:
MTK with NOR flash types, in most cases based on CPU types like MT625x, MT626x, and some MT622x