Infinity Box Dongle [CM2] [BEST] Support

registered to: delux_gsm

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Read and Check phone data...
----------------------
RAP_BOOT: 0D01010103010000
RAP_PUB: 1B50001487600344CDD7AD794C5734CCDCA1E385
CMT_ROOT: 25B977A055BE9B5DEC0C38A2A279C695
RAP_PAPUB: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
CNT sector : 64 kb
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

PA_SimLock Version :
PA_SL3 phone detected

Done!

Read and Check phone data...
----------------------
RAP_BOOT: 0D01010103010000
RAP_PUB: 1B50001487600344CDD7AD794C5734CCDCA1E385
CMT_ROOT: 25B977A055BE9B5DEC0C38A2A279C695
RAP_PAPUB: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
CNT sector : 64 kb
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

PA_SimLock Version :
PA_SL3 phone detected

Done!

Read and Check phone data...
----------------------
RAP_BOOT: 0D01010103010000
RAP_PUB: 1B50001487600344CDD7AD794C5734CCDCA1E385
CMT_ROOT: 25B977A055BE9B5DEC0C38A2A279C695
RAP_PAPUB: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
CNT sector : 64 kb
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

PA_SimLock Version :
PA_SL3 phone detected

Done!

Read Uniq key data started...

Key file exists, no need to read...

Done!

Read and Check phone data...
----------------------
RAP_BOOT: 0D01010103010000
RAP_PUB: 1B50001487600344CDD7AD794C5734CCDCA1E385
CMT_ROOT: 25B977A055BE9B5DEC0C38A2A279C695
RAP_PAPUB: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
CNT sector : 64 kb
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

PA_SimLock Version :
PA_SL3 phone detected

Done!

Read and Check phone data...
----------------------
RAP_BOOT: 0D01010103010000
RAP_PUB: 1B50001487600344CDD7AD794C5734CCDCA1E385
CMT_ROOT: 25B977A055BE9B5DEC0C38A2A279C695
RAP_PAPUB: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
CNT sector : 64 kb
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

PA_SimLock Version :
PA_SL3 phone detected

Done!

Core version : 1.23 , Rev : 4.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm470__10.50.mcusw
PPM : rm470__10.50.ppm_p
CNT : rm470__10.50_ISM_014.image_p_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
SL3 Simlock read ... ok
WMDRM read ... ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 1B50001487600344CDD7AD794C5734CCDCA1E385
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353181038067436
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\353181038067436.rpl

===Flashing [MCU]===
Erase : Processing rm470__10.50.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__10.50.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 218 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm470__10.50.ppm_p
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__10.50.ppm_p
Total writen 53 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm470__10.50_ISM_014.image_p_black
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm470__10.50_ISM_014.image_p_black
Total writen 227 blocks
TIME : Write time : 00:00:04
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:15
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software Info: V 10.50 23-11-09 RM-470 (c) Nokia
IMEI: 353181038067436
PPM version : V 10.50 23-11-09 RM-470 (c) Nokia P
Product code: 0586284
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:01:39
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Resetting selected items...
Check phone mode...
Phone already in Test mode, skip change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:01,,,,,,,,,,,,,,,,,,,,,,

registered to: delux_gsm

Connect phone on selected interface...

UFS S/N 78870 boot - Ok

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Core version : 1.23 , Rev : 4.8

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : N73_4.0850.43.0.1_western_C00_PRD_cc.fpsx
PPM : N73_rofx_4.0850.43.0.1_PRD.V11
CNT : N73_userarea_4.0850.43.0.1.U01
Check FlashFiles, Please, wait...
-> SWversion check skipped : Manual mode selected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

APE part info :
APE ASICID : 17100708
APE MODE ID : 00
APE PUB ID : 8C0407E9D4BDED8DCD3DDC07A982F5C43CE26067
APE R_HASH : 49A97E826B93BA20B7ED0B082475C005
APE ROM ID : 1DFD66132C872FD4

CMT part info :
CMT ASICID : 000000010000022600010006010C192101003000
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 234002097E5C6350C3EEE1A4346B82DBBEA16F91
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 22E800EC , CMT , NOR
CMT Flash ID : 22E800EC < SAMSUNG [SEC] => K5G2829ATC
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 5E8D0D504A0902E261268C14FCD8A2C9093523BCBD
Transmission mode : Dual (Ddr, TX2)

APE : Sending 2nd loader...
Use : helen3_2nd.fg , Rev : 0.0 Ver : 1.35.0
APE Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 02
FLASHID : 00A100EC , APE ,
APE Flash ID : 00A100EC < SAMSUNG [SEC] => K5E1G12ACM [NAND]
FLCNT : 010100FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Sending ALGO....
Use : h3_sam_nand_xsr.fg , Rev : 0.0 Ver : 1.47.0
APE Algo sent
APE PAPUB : 5E8D0D504A0902E261268C14FCD8A2C9093523BCBC
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing N73_4.0850.43.0.1_western_C00_PRD_cc.fpsx
Found 4 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00080000 - 0x0073194D
CMT , NOR , Area : 0x00000000 - 0x0005FFFF
CMT , NOR , Area : 0x001E0000 - 0x001FFFFF
CMT , NOR , Area : 0x00880000 - 0x00FEFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
Found 4 areas to erase, erase group
Asic : APE , Sub : NAND
APE , NAND , Area : 0x00000000 - 0x0007FFFF
APE , NAND , Area : 0x00080000 - 0x000FFFFF
APE , NAND , Area : 0x00100000 - 0x0025FFFF
APE , NAND , Area : 0x003C0000 - 0x04E1FFFF
Erasing, wait.....
APE : Group erase Ok
TIME : Erase time : 00:00:45
PrReq : NOR , 00
PrReq : NAND , 01030000504A0900E261260014FCD8
Transmission mode : Dual (Ddr, TX2)
Write : Processing N73_4.0850.43.0.1_western_C00_PRD_cc.fpsx
CMT: Writing Hash CERT [NOLO]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ADL]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
APE: Writing Hash CERT [KEYS]
APE: Writing Hash CERT [X-LOADER]
APE: Writing Hash CERT [PRIMAPP]
APE: Writing Hash CERT [SOS+LOADER]
APE: Writing Hash CERT [SOS*UPDAPP]
APE: Writing Hash CERT [SOS+UZIP]
APE: Writing Hash CERT [PAPUBKEYS]
APE: Writing Hash CERT [PASUBTOC]
APE: Writing Hash CERT [ADL]
APE: Writing Hash CERT [SOS+XZIP]
APE: Writing Hash CERT [SOS*CORE]
APE: Writing Hash CERT [SOS+ROFS]
APE: Writing Hash CERT [SOS+ROFX]
Total writen 1704 blocks
TIME : Write time : 00:05:11

PrReq : NOR , 00
PrReq : NAND , 01030000504A0900E261260014FCD8

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing N73_rofx_4.0850.43.0.1_PRD.V11
Found 1 areas to erase, erase group
Asic : APE , Sub : NAND
APE , NAND , Area : 0x03920000 - 0x04E1FFFF
Erasing, wait.....
APE : Group erase Ok
TIME : Erase time : 00:00:00
PrReq : NOR , 00
PrReq : NAND , 01030000504A0900E261260014FCD8
Transmission mode : Dual (Ddr, TX2)
Write : Processing N73_rofx_4.0850.43.0.1_PRD.V11
APE: Writing Hash CERT [SOS+ROFX]
Total writen 1987 blocks
TIME : Write time : 00:02:39

PrReq : NOR , 00
PrReq : NAND , 01030000504A0900E261260014FCD8

Transmission mode : Dual (Ddr, TX2)
Erase : Processing N73_userarea_4.0850.43.0.1.U01
Found 1 areas to erase, erase group
Asic : APE , Sub : NAND
APE , NAND , Area : 0x04E20000 - 0x07C9FFFF
Erasing, wait.....
APE : Group erase Ok
TIME : Erase time : 00:00:00
PrReq : NOR , 00
PrReq : NAND , 01030000504A0900E261260014FCD8
Transmission mode : Dual (Ddr, TX2)
Write : Processing N73_userarea_4.0850.43.0.1.U01
Total writen 164 blocks
TIME : Write time : 00:00:33

PrReq : NOR , 00
PrReq : NAND , 01030000504A0900E261260014FCD8


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia N73
Software Info: V 05wk47v62
05-12-08
RM-133
(c) Nokia.
IMEI: 357652011817571
Product code: 0546349
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 2730 classic
Software ver : V 07.70 18-09-09 RM-578 (c) Nokia
IMEI : 359370033886452
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR72_TOMMY_09w21
APE Test:
PPM : V 07.70 18-09-09 RM-578 (c) Nokia S
CNT : Content: s_black V 07.70 18-09-09 RM-578 (c) Nokia
Product SN : IUC004320
Product code : 0585832
Base Prd.code: 0580665
Module code : 0204322
Long Prod.SN : 0
Hardware info=======
HWID : 3000
Retu : 16
Tahvo : 22
Batery: 3763 mV
Camera:
CMT BT: .31
APE BT:
APE HW:
LCDVer: SEIKO
RF ic :
Lock info ===========
IMEI : 359370033886452
IMEI spNet : 3A 95 73 00 33 88 46 05
IMEI svNet : 33 95 73 00 33 88 46 45 F7

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

User Code : 12345
MMC pwd : Backup saved
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Reading MMC password...
MMC pass Record found, saving...
2 MMC pwd records are found! Extracting...
-------------------------------
We have next Pass: atg.w.
We have next Pass: atd.w.
-------------------------------
Done!

card found: S/N *********
registered to: orange mobile

DLL not found...
Connect phone on selected interface...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_mh
CNT : rm495__07.97_v2.image_mh_red
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006030C192101033000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 06200109C4617D5691C358298F9D2E2CA9B727F2
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm495__07.97.mcusw
Found 6 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:16
Write : Processing rm495__07.97.mcusw
Total 1178 [1178/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:00:58
MCU Write done
===Flashing [PPM]===
Erase : Processing rm495__07.97.ppm_mh
Found 1 areas to erase
Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:56
Write : Processing rm495__07.97.ppm_mh
Total 450 [450/0/0] blocks to write, writing...
TIME : Write time : 00:00:22
PPM Write done
===Flashing [CNT]===
Erase : Processing rm495__07.97_v2.image_mh_red
Found 2 areas to erase
Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT
Result: 0000
Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:04:42
Checking content info...
Check Image : Content size is 128k, use direct write mode
Write : Processing rm495__07.97_v2.image_mh_red
Total 528 [528/0/0] blocks to write, writing...
TIME : Write time : 00:00:26
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:09:42
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software Info: V 07.97 13-09-10 RM-495 (c) Nokia
IMEI: 354223032638983
PPM version : V 07.97 13-09-10 RM-495 (c) Nokia MH
Product code: 0571593
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done ;D
Done!

Elapsed: 00:10:30

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok
Br:)
ORANGE MOB

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
-> File : RM-596_011.012_C15.01_MEA_1_UAE_79.92_prd.rofs3.fpsx not found! Check it!
Check FlashFiles, Please, wait...

Files Set for Flashing :
CNT : RM-596_011.012_U03.01_79.92_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Custom mode selected
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Batery valtage : 3702 mV
-> Batery voltage less, than 3,8V (3702mV). Continue at user risk
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0EA00008E9A40344A08E69CF532E8B83ADA71BAD
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D172C32473AE199B213465ABB3853246F9631231
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352684047385815
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\InfinityBox_install_BEST_v1.30\Backup\Cert\352684047385815_2nd.rpl

===Flashing [CNT]===
Erase : Processing RM-596_011.012_U03.01_79.92_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_011.012_U03.01_79.92_prd.uda.fpsx
Total writen 208 blocks
TIME : Write time : 00:00:08
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:09
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia N8-00
Software Info: V 92PS1_10w34.3 10-09-10 RM-596 (c) Nokia
IMEI: 352684047385815
Ape Version: 011.012
Product code: 059C7Q4
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done ;D
Done!

Elapsed: 00:00:31
Connect phone on selected interface...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
CNT : rm704__03.42.image_m_c_jblack_059C1S2
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : SGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.44_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

===Flashing [CNT]===
File : rm704__03.42.image_m_c_jblack_059C1S2
Image : package_m_c_jblack_059C1S2.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:03:35
Write , Start : 0x421C0000 , Len : 0x00A40000
Flashing , wait ...
Region flash done, time : 00:00:19
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:06
No write data, skip

Flashing done!
Total flash time : 00:04:01
Reboot phone now...

Reading Phone Info....
Connected phone - C2-00
Software Info: V 03.42 11-05-11 RM-704 (c) Nokia
IMEI: 357414042547424
PPM version : V 03.42 11-05-11 RM-704 (c) Nokia M_A
Product code: 059J4Z7
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 42 certs
Data exist, skip certificate repair...
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:30
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
Check communication with phone....
ADL not support backup mode, rpl reading impossible
SimLock Data saved...
SimLock Key saved...

RPL saved : D:\InfinityBox_install_BEST_v1.30\Backup\Cert\357414042547424_SIM.rpl


Elapsed: 00:00:01
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok

registered to: saeedullah_khan

Connect phone on selected interface...

UFS S/N 110743 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

BackUp UserData : [PhoneBook]
Generation mode : [S40]
Reading Phonebook...
csv file save to D:\InfinityBox_install_BEST_v1.30\RM-237 Nokia 3110c_355220035437610.csv
27 phonebook records are found!
VCF Records saved to : BEST\Phones_Data\IMEI\
Saved to: D:\InfinityBox_install_BEST_v1.30\RM-237 Nokia 3110c_355220035437610.S4pb
Done...

Reading MMC password...
password not set

BackUp UserData : [SMS/MMS]
Generation mode : [S40]
Scanning FileSystem..
Scan done, processing data...
Total - 2592 files
Reading, wait....

-------READ SMS/MMS BREAKED BY USER-------

card found: S/N 11BA:0118
registered to: saeedullah_khan

Connect phone on selected interface...

UFS S/N 110743 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Files Set for Flashing :
CNT : rm237__07.30.image_c_tr_blue
Check FlashFiles, Please, wait...
-> SWversion check skipped : Custom mode selected

Backup enabled, Will read Certificates now...
WMDRM read ... ok
CRT308 Backup Created
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 08E0000750DE7E567C411CD535BB695982239007
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89810089 , CMT , NOR
CMT Flash ID : 89810089 < INTEL => NU48F256
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 355220035437610
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
WMDRM_PD Data saved...

RPL saved : D:\InfinityBox_install_BEST_v1.30\Backup\Cert\355220035437610_2nd.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 08E0000750DE7E567C411CD535BB695982239007
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89810089 , CMT , NOR
CMT Flash ID : 89810089 < INTEL => NU48F256
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CNT : Converted to 128k page data exist
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm237__07.30.image_c_tr_blue_128
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01520000 - 0x01FDFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:15
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm237__07.30.image_c_tr_blue_128
Total writen 240 blocks
TIME : Write time : 00:00:30

PrReq : NOR , 00


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 3110c
Software Info: V 07.21
05-11-08
RM-237
(c) Nokia.
IMEI: 355220035437610
Product code: 0544325
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
Error When resetting SW upgrade Default ...
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done ;D
Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL phone detected

Done!

Restoring UserData : [PhoneBook]
Generation mode : [S40]
Check phone mode...
Phone already in Local mode, skip change...
Writing Phonebook...
27 phonebook records write ok!
Done...

Phone disconected!

Connect phone on selected interface...

registered to: saeedullah_khan

Connect phone on selected interface...

UFS S/N 113742 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Files Set for Flashing :
CNT : rm217__07.30.image_ctv_cn_black
Check FlashFiles, Please, wait...
-> SWversion check skipped : Custom mode selected

Backup enabled, Will read Certificates now...
WMDRM read ... ok
CRT308 Backup Created
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 1490010774796E563CFFA44CED86415F2910DE32
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 002F0001 , CMT , NOR
CMT Flash ID : 002F0001 < SPANSION => 72NS256N
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 7F7E6491E8D30494B45630BB3A8599F4E1C674C955
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 359811010379219
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
WMDRM_PD Data saved...

RPL saved : D:\InfinityBox_install_BEST_v1.30\Backup\Cert\359811010379219_2nd.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 1490010774796E563CFFA44CED86415F2910DE32
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 002F0001 , CMT , NOR
CMT Flash ID : 002F0001 < SPANSION => 72NS256N
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 7F7E6491E8D30494B45630BB3A8599F4E1C674C955
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CNT : Converted to 128k page data exist
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm217__07.30.image_ctv_cn_black_128
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01600000 - 0x01FDFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:04
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm217__07.30.image_ctv_cn_black_128
Total writen 296 blocks
TIME : Write time : 00:00:36

PrReq : NOR , 00


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 6300
Software Info: Error
IMEI:
Product code: Error
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done ;D
Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

registered to: saeedullah_khan

Connect phone on selected interface...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm443__10.12.mcusw
PPM : rm443__10.12.ppm_f
CNT : rm443__10.12.image_f_chestnut
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006030C192101033000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 0EF000066F9D7D562E6BE87A0F9257E7AADDA389
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
-> Error while send data to phone!
Check battery, connection. Try again
Connect phone on selected interface...

-> Error while flashing...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm443__10.12.mcusw
PPM : rm443__10.12.ppm_f
CNT : rm443__10.12.image_f_chestnut
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006030C192101033000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 0EF000066F9D7D562E6BE87A0F9257E7AADDA389
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:08
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm443__10.12.mcusw
Found 8 areas to erase
Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x0005FFFF, NOR, CMT
Result: 0000
Erasing area 0x00060000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x0015FFFF, NOR, CMT
Result: 0000
Erasing area 0x00160000 - 0x0023FFFF, NOR, CMT
Result: 0000
Erasing area 0x01740000 - 0x0191FFFF, NOR, CMT
Result: 0000
Erasing area 0x00240000 - 0x0173FFFF, NOR, CMT
Result: 0000
Erasing area 0x022E0000 - 0x0261FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:03:22
Write : Processing rm443__10.12.mcusw
Total 1597 [1597/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [ISA+DYNSW]
TIME : Write time : 00:01:04
MCU Write done
===Flashing [PPM]===
Erase : Processing rm443__10.12.ppm_f
Found 1 areas to erase
Erasing area 0x01920000 - 0x022DFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:09
Write : Processing rm443__10.12.ppm_f
Total 391 [391/0/0] blocks to write, writing...
TIME : Write time : 00:00:15
PPM Write done
===Flashing [CNT]===
Erase : Processing rm443__10.12.image_f_chestnut
Found 2 areas to erase
Erasing area 0x02620000 - 0x029BFFFF, NOR, CMT
Result: 0000
Erasing area 0x029C0000 - 0x03FBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:04:06
Checking content info...
Check Image : Content size is 128k, use direct write mode
Write : Processing rm443__10.12.image_f_chestnut
Total 640 [640/0/0] blocks to write, writing...
TIME : Write time : 00:00:27
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:10:25
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6303 classic
Software Info: V 10.12 08-04-10 RM-443 (c) Nokia
IMEI: 353199036292368
PPM version : V 10.12 08-04-10 RM-443 (c) Nokia F
Product code: 0569439
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done ;D
Done!

Elapsed: 00:11:08

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
Check communication with phone....
ADL not support backup mode, rpl reading impossible
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\InfinityBox_install_BEST_v1.30\Backup\Cert\353199036292368_SIM.rpl


Elapsed: 00:00:01
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok

UFS S/N 113742 boot - Ok

Connect phone on selected interface...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Files Set for Flashing :
CNT : rm237__07.30.image_c_tr_blue
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected

Backup enabled, Will read Certificates now...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 10B001196FFC6F56ECD6053C73E9EBD72D4BBDBB
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 881C0020 , CMT , NOR
CMT Flash ID : 881C0020 < ST => M39L0R807
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 353086026239121
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!


Init Service mode... Wait...

CRT308 Backup Created
WMDRM read ... ok
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
WMDRM_PD Data saved...

RPL saved : D:\InfinityBox_install_BEST_v1.30\Backup\Cert\353086026239121.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 10B001196FFC6F56ECD6053C73E9EBD72D4BBDBB
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 881C0020 , CMT , NOR
CMT Flash ID : 881C0020 < ST => M39L0R807
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CNT : Converted to 128k page data exist
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm237__07.30.image_c_tr_blue_128
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01520000 - 0x01FDFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:45
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm237__07.30.image_c_tr_blue_128
Total writen 240 blocks
TIME : Write time : 00:00:34

PrReq : NOR , 00


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 3110c
Software Info: V 05.50
14-08-07
RM-237
(c) Nokia.
IMEI: 353086026239121
Product code: 0544329
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done ;D
Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Core : v1.40 , FlashEngine : v1.23

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm271__03.46.mcusw
PPM : rm271__03.46.ppm_m14
CNT : rm271__03.46.image_m14
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID: 000000010000022600010006010C192101003000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 2980010E51540254775A137A97BAD0EA1DFC2E7A
CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:08
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm271__03.46.mcusw
Found 5 areas to erase
Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x014FFFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:52
Write : Processing rm271__03.46.mcusw
Total 1120 [1120/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:02:03
MCU Write done
===Flashing [PPM]===
Erase : Processing rm271__03.46.ppm_m14
Found 1 areas to erase
Erasing area 0x01500000 - 0x01BBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:15
Write : Processing rm271__03.46.ppm_m14
Total 326 [326/0/0] blocks to write, writing...
TIME : Write time : 00:00:41
PPM Write done
===Flashing [CNT]===
Erase : Processing rm271__03.46.image_m14
Found 2 areas to erase
Erasing area 0x01FC0000 - 0x03F9FFFF, NOR, CMT
Result: 0000
Erasing area 0x01BC0000 - 0x01FBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:47
Checking content info...
Check Image : Content size is 128k, use direct write mode
Write : Processing rm271__03.46.image_m14
Total 424 [424/0/0] blocks to write, writing...
TIME : Write time : 00:00:43
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:06:23
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6555
Software Info: V 03.46 30-10-08 RM-271 (c) Nokia
IMEI: 356*************
PPM version : Vp 03.46 30-10-08 RM-271 (c) Nokia M14
Product code: 05****
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:07:56

Connect phone on selected interface...