how to full erase ... this set

[mobileservice]

Code: Select all

COM15 [Serial2] selected
module  v4.04
Device: _Autodetect MT6253 NOR
Checking data, wait...
Action: erase whole flash chip
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A04:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: absent
done
Set baudrate (460800)...
done
interesting cpu type found: 6253:8A04:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E588DV_GF_D.1.1
detect NOR info...
number of areas/bytes to read: 1:00050000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: E588DV_GF_D_PCB01_GPRS_MT6253_S00.1_1.BIN_FLNK5N2833ATB_AQ12000
project-id: E588DV_GF_D.1.1, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
error: NAND chip size is zero
error: last error: 03F0:S_BUF_LEN_IS_ZERO
Disconnect...
done
Finished, time used: 44 sec
Remove/Install battery now !

[mobileservice]

try to flash so give me error...

Code: Select all

COM15 [Serial2] selected
module  v4.04
Device: _Autodetect MT6253 NOR
Checking data, wait...
Action: write flash
write: Firmware
E588DV_GF_D_PCB01_GPRS_MT6253_S00.1_1.BIN_FLNK5N2833ATB_AQ12000__firmware_20110722-105408.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nor area detection...
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A04:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: absent
done
Set baudrate (460800)...
done
interesting cpu type found: 6253:8A04:8A00
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E588DV_GF_D.1.1
detect NOR info...
number of areas/bytes to read: 1:00050000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: E588DV_GF_D_PCB01_GPRS_MT6253_S00.1_1.BIN_FLNK5N2833ATB_AQ12000
project-id: E588DV_GF_D.1.1, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
startup code area #1 check...
done
number of cores: 1
loading files...
number of areas: 1
done
write...
write core...
error: can not write flash (11): 0FA8:S_FT_DOWNLOAD_FAIL
error: last error: 0FA8:S_FT_DOWNLOAD_FAIL
Disconnect...
done
Finished, time used: 1 min 57 sec
Remove/Install battery now !

this file... use in flash http://forum.gsmhosting.com/vbb/f646/gf ... ost7456735

[Support]

Hello,

If phone flash chip can not be written - in most cases it's a hardware problem.
1. double check phone battery voltage
2. open phone and check phone PCB for visible defects
3. open phone and rehot flash chip