Support wrote: ↑20 Sep 2024, 13:58
electrun_NG wrote: ↑02 Sep 2024, 16:53
I need help flashing itel S24. I have the firmware(scatter) but phone not detected with CM2MTK2. Can anyone help. Thank you
Hello,
Please send me software log **text** and I will check where is your problem
I was able to read the phone yesterday under tecno with this DA
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE: PRELOADER PORT; PORT: 12
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
Code: Talbot
Type: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005; Mode: SBC+SDA
Ver: 0xFF BL: 0x03 [PRELOADER PORT]
SOCID: B1538E4C7C4197F4F5039911EB0945B0802A91AF8057B128A97C95B7A7D83B2F
Agent:
[46c0b1ae] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\MTK_AllInOne_DA_v2312.bf41.cca2a535.bin
[bd322c2c] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\auth_sv5_24.auth
Looking for bootchain in DA...
Found: MT6768; DA: MTK_DOWNLOAD_AGENT
BROM: Sending DA1... Ok [1|0|0|0]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
DA Set Params... Ok
Mode: PRELOADER [1|0|0|0]
EXT_RAM initialized
Boot DA2... Ok [1|0|0|28]
DA Sync... Ok
DA Auth Ok
Load HW info...
RAM: SRAM: 0x00070000 [ 448.00 Kb ]
RAM: DRAM: 0x100000000 [ 4.00 Gb ]
EMMC CID: F40122414B4A3431581448C69055CA53 crc Ok
Vendor: Biwin OEM: 290 ID: 414B4A343158 [AKJ41X] PRV: 0x14
Serial: 1220972629 0x48C69055
MM/YY: 12/2023
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x3A40000000 [ 233.00 Gb ]
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0707
Code: Talbot
Type: MODERN [RAPHAEL]
RNID: 6F08B2C210837621D3D0E87735DB97F0
da pl engine nOk 0x01
USB: HIGH-SPEED
Boot done MODERN [RAPHAEL] 14 sec
Build key.json... Ok
Saved: C:\InfinityBox\CM2MT2\phdata\key.json
Analyze PMT... Ok
Partition table: PGPT [0x64] with 53 records
Storage [eMMC] Life State: OK
Storage OTP Status: Unlocked
Storage [eMMC] RPMB State: RPMB KEY NOT PROGRAMMED [USABLE]
Load [MemTool]... Ok
Get slot info... a
Probe boot... Finished 62 us
AndroidInfo: vendor_boot_a;ramdisk size=0;boot_a;ramdisk size=0;vendor_boot_b;ramdisk size=0;boot_b;ramdisk size=0;
Probe core...
Skip FS 0x3C000000 super Finished 172 us
Probe uboot... Finished 282 us
Probe items... Finished 0 us
If process will stop later - try with [SW info] Off
Strategy: [none|generic]
Firmware ID: MT6768
Analyze userdata...
Load userdata header... Ok
userData: empty
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6768__25D8CF9660DA14932E483484EE3E17BB
get modem info... absent
Load nvram items...
NVRAM size: 0x08C679; 164 items; State: Ok
WiFi MAC: CC:8C:17:09:6E:89
BT MAC: CC:8C:17:09:6E:88
imei-1: 35503519177076
imei-2: 35503519177077
PSN1: 120046443F002147
Secondary RPMB... Off
Analyze preloader...
EMI: MT6752 preloader_s667ln_h6933.bin with 7 memory type(s)
1. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 8.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 8.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 4.00 Gb
7. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 8.00 Gb
Preloader exist: C:\InfinityBox\CM2MT2\backup\preloader\preloader_s667ln_h6933.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_s667ln_h6933.bin [95e02af6]... Exist
Probe FRP... Off
Probe bootloader... Seems as Locked
Verify [DA] data... Ok
Finished 38 sec
Keep connection