Card returned error: 6D00 at 377/8206

Post Reply
fahadboss10
Posts: 11
Joined: 11 Aug 2020, 10:24

Card returned error: 6D00 at 377/8206

Post by fahadboss10 »

Hello!
Today I tried to update my Infinity-Box but faced this error. Now Softwares are unable to detect box.

Code: Select all

=== DongleManager [Infinity] v1.88 [11/23/2021 4:27:08 PM] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: Gemalto e-gate Smart Card 0
HWID: 00029553FF021982
=== Started: 11/23/2021 4:27:08 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication successfull
Service stage 1 confirmed
Securing session...
Session secured Ok
Updating...
Wait 4-5 minutes, DO NOT disconnect Smart-Card
Card returned error: 6D00 at 377/8206
Error upgrading applets:
Card returned error: 6D00 at 377/8206
Disconnected
Any solution?
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Card returned error: 6D00 at 377/8206

Post by Support »

fahadboss10 wrote: 23 Nov 2021, 11:30 Hello!
Today I tried to update my Infinity-Box but faced this error. Now Softwares are unable to detect box.

Code: Select all

=== DongleManager [Infinity] v1.88 [11/23/2021 4:27:08 PM] ===
Box/Dongle type selected: Infinity-Box/Dongle [CM2]
Card-Reader: Gemalto e-gate Smart Card 0
HWID: 00029553FF021982
=== Started: 11/23/2021 4:27:08 PM ===
Connecting to server...
Connection successfully established
Checking DongleManager version...
DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication successfull
Service stage 1 confirmed
Securing session...
Session secured Ok
Updating...
Wait 4-5 minutes, DO NOT disconnect Smart-Card
Card returned error: 6D00 at 377/8206
Error upgrading applets:
Card returned error: 6D00 at 377/8206
Disconnected
Any solution?
Hi,
This card is from year 2007, it's 15 years old, it may be card hardware fault.

Try to connect Dongle to another PC
Try to insert Smart-Card into another Card-Reader or Box

If problem still exist:
- Remove Smart-Card from Card-Reader
- Clean Smart-Card contacts
- Try to use hot air gun and heat Smart-Card
- Insert Smart-Card back to Card-reader

If problem still exist this means it's a hardware problem and you should buy new Dongle.
fahadboss10
Posts: 11
Joined: 11 Aug 2020, 10:24

Re: Card returned error: 6D00 at 377/8206

Post by fahadboss10 »

Problem fixed by Updating box firmware on other PC.
Post Reply