Page 29 of 32

Re: Software Updates and News

Posted: 04 Oct 2022, 13:47
by Support
Infinity #CM2MT2 boot pack v2.32 released with updated loaders

loaders updated & structure improved

[+] Lenovo
[+] Meizu
[+] Moto
[+] Oppo
[+] Oukitel
[+] QSmart
[+] Realme
[+] Symphony
[+] TP-Link Nefos
[+] Umidigi
[+] Vivo
[+] Xiaomi

Re: Software Updates and News

Posted: 04 Oct 2022, 13:47
by Support
2022-05-31 Infinity #CM2SP2 boot pack v1.07 released with updated loaders

[+] Blackfox
[+] Ginzzu
[+] Hotwav
[+] iGet
[+] Infinix
[+] Movitel
[+] Nobby
[+] Symphony
[+] Teclast

Re: Software Updates and News

Posted: 04 Oct 2022, 13:47
by Support
2022-06-04 Infinity #CM2SP2 boot pack v1.08 released with updated loaders

[+] iTel

Re: Software Updates and News

Posted: 04 Oct 2022, 13:48
by Support
Infinity #CM2MT2 boot pack v2.33 released with updated loaders

loaders updated & structure improved

[+] Huawei

Re: Software Updates and News

Posted: 04 Oct 2022, 13:48
by Support
Infinity #CM2SP2 boot pack v1.09 released with updated loaders

[+] Condor
[+] HiSense
[+] Kiowa
[+] Lava
[+] Micromax
[+] Stylo

Re: Software Updates and News

Posted: 04 Oct 2022, 13:48
by Support
2022-06-27 Infinity Data Explorer v1.12 - MTK, SPD updated and more improvements

Data extraction based on full reconstruction of file system

- MTK firmware structure detection improved
- SPD firmware structure detection improved
- Minor bugs fixed

Re: Software Updates and News

Posted: 04 Oct 2022, 13:48
by Support
2022-08-16 Infinity #CM2SP2 boot pack v1.10 released with updated loaders

[+] G-Touch
[+] Hotwav
[+] Infinix
[+] Mito
[+] Mobicel
[+] QC-QcTech
[+] Realme
[+] Symphony
[+] Stylus
[+] ZTE

Re: Software Updates and News

Posted: 04 Oct 2022, 13:49
by Support
2022-08-30 Infinity Chinese Miracle-2 #CM2MT2 v2.35 - general improvements and fixes

[*] Internal changes and fixes for protocols applied
[*] Internal changes and fixes for flasher applied
[*] Internal changes and fixes for preloader parser applied
[*] Preloader database handling updated
[*] Preloader database remote verification enabled by default
[*] Log engine updated: log files created for each session and stored to /log/ directory
[*] Deep Info parser enabled by default
[*] User Interface updated
[*] Product-specific Loader [DA] files moved to CM2MT2-boot-pack
[*] Required Dongle firmware version: 0153

Re: Software Updates and News

Posted: 04 Oct 2022, 13:49
by Support
2022-09-11 Infinity #CM2SP2 boot pack v1.11 released with updated loaders

[+] Ais
[+] BQ
[+] Expert
[+] FinePower
[+] Ginzzu
[+] Micromax
[+] Oysters
[+] Philips
[+] Stark
[+] teXet
[+] Vertex

Re: Software Updates and News

Posted: 04 Oct 2022, 13:49
by Support
2022-09-20 Infinity #CM2MT2 boot pack v2.35 released with updated loaders

Loaders updated & structure improved

[+] MT6771 experimantal loader [0_base]

Every new boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders

Re: Software Updates and News

Posted: 04 Oct 2022, 13:50
by Support
Infinity Chinese Miracle-2 #CM2MT2 v2.36 - general improvements and fixes [Firmware v0153]

- SmartInfo parser output revised
- NVRAM parser output revised
- Firmware remote verification enabled
- Device remote verification enabled
- Preloader parser revised and fixed
- Peloader remote verification enabled
- "KG State" moved to Service page
- "Help" menu
- View log files by right mouse click on message window
- View log files via "File" menu
- "Logs" button at main window to view log files
- "Snap" button at main window to make screenshot
- "Stop" button at main window
- Verification for preloader|da|firmware integrity
- Show current settings at operation start
- Show "Local SLA" state at operation start
- Show "Flash Write" settings at operation start
- "HW Report" mode selection changed
- "Check Account" button at "Settings" page to verify Username and Password validity
- Loaders remote verification enabled
- Show loaders information at boot time
- Memory chip life-state warnings updated
- "Stop" item removed from the top menu
- Boot stage loader files information revised
- "GUI Mode" item removed from the top menu and moved to "View" button
- "Memory Tool" moved to "Service" page
- "Make Service Report" moved to "Service" page
- "Settings" -> "Firefy : EMI" menu item moved to "FireFly : AutoEMI" at "Settings" page
- "GUI mode" save/restore on startup
- "Change GUI mode" via "Settings" menu
- HW Compatibility Wizard enabled
- Server Hints engine enabled
- "PMT Info" option at "Platform" page display Partition Info during "Identify"
- "Save Boot Config" option at "Platform" page to store detected model config to models list
- Required Dongle firmware version: 0153

Re: Software Updates and News

Posted: 07 Dec 2022, 15:45
by Support
Infinity Chinese Miracle-2 CM2MT2 v2.38 - general improvements and fixes

!!! WARNING !!!
Backup files storage structure changed, files and folders will be compressed.
Software will convert files and folders at first run!
If you have important data - make /backup/ folder copy for emergency case!
Process may takes time, BE PATIENT!

- Startup process revised
- Backup files are packed, zip and 7z formats are supported (7z.dll is required)
- Backup files default format is 7z
- Backup|Restore partitions list updated
- Backup overwrite request for "Identify" only, skip existing backup replacement for other operations
- Partition size verification during backup
- File content verification (zeroes) during backup creation
- File content verification (zeroes) during backup restore
- Display hw|sw info to log during backup file selection
- Restore backup images with .bin and .img extensions
- Legacy settings values removed
- MemTool work path save|restore
- MemTool window position save|restore
- MemTool ui changes
- Log window style customization
- HW Report behaviour changed depends on selected Platform
- Cloud: display hw|sw info about last connected device
- Cloud: get previously stored backup file
- Flash chip vendors list updated
- ufs parser revised
- emmc parser revised
- emmc failure detection improved
- nand parser revised
- Firmware read/write last selected path save|restore
- scatter file creation process rebuilded
- scatter file load process revised
- META mode connection method revised
- META mode info and device version output revised
- META mode memory leak fixed
- Check free disk space on startup
- Check free disk space on Flash Read
- Flash Read file selection method updated
- Flash Read process termination revised
- Backup before Reset in META mode
- Backup before Reset in Flash mode
- extcsd backup file content verification
- PMT (partition table) info output slightly changed
- PMT (partition table) info included to device.txt during backup
- Store device.txt with hardware and software info to backup
- Store device.txt with hardware and software info to firmware
- Store device.txt file as ini
- Store loaders config to device.txt file
- Verify backup presence before process
- Error messages and software hints updated
- More software hints for [Format] operations
- More messages in log about process flow
- [SMART RESET EXTRA] error handling revised to recover after error
- Create Screenshot [Snap] as .png instead of .bmp (quite compact)
- Device brand|model detection revised
- Updates checker rebuilded
- External update checker disabled
- External firmware uploader enabled
- [Stop] process revised
- Customs Settings -> EMI button extract prevoader from partition image on load
- MemTool selection mode for 128 Mb and 256 Mb in list
- MemTool file selection revised
- MemTool operations revised
- Flash page minor ui changes
- [Security] page minor ui changes
- [NVRAM Read] operation revised
- [NVRAM Write] operation revised
- NVRAM backup file format changed
- [Restore Backup] operation allow to select backup file
- [Restore Backup] has new restore mode [+preloader]
- Check free disk space before backup
- settings.ini new value [where] backup=backup\
- settings.ini new value [where] boot=boot\
- settings.ini new value [where] tools=..\tools\
- settings.ini new value [where] firmware=firmware\
- SC engine revised
- Files verification config option in [Settings] page
- Files verification for nvram backup enabled
- Memory management engine revised
- [KG] moved to [Misc] section
- Dialogs texts revised. Message text will be visible in log window on selection
- Minor log text messages and ui changes
- Check required dll's on startup
- ssleay32.dll included to installer to improve compatibility
- 7z.dll included to installer
- /tools/iosFileUploader included to installer
- Required Dongle firmware version: 0153

https://infinity-box.com/news/?r=4280

Re: Software Updates and News

Posted: 25 Dec 2022, 17:54
by Support
Infinity Chinese Miracle-2 #CM2MT2 v2.39 - MT6789 [Helio G99] and more

Loaders updated:
/boot/0_generic/MT6781_Generic [LUCI]
/boot/0_generic/MT6789_Generic [LUCI]
/boot/Infinix/Infinix-G99-General
/boot/Infinix/Infinix-X676B
/boot/Tecno/Tecno-G99-General

General:
New protocol supported: [LUCI] - MT6781, MT6789, MT6895, MT6983 etc.
Supported:
SecurityRepair : Generic lines support for latest phones in both FLASH and META mode
FormatFS : SmartReset, SmartResetExtra - include reset settings, frp, privacy etc.
FirmwareReading : Factory-like, complete, safe firmware, compatible with MT2 and SPFT too
FirmwareFlashing : Correct, safe, factory and read firmware flashing support
Service : Service operations supported : Identify, NVRAM operations, MemoryTool, HW Info etc.

FormatFS:
Smart Reset updated: New types supported
Smart Reset updated: Android 11-12 specific changes
Smart Reset updated: A/B devices specific changes

Firmware reader:
NEXTGEN [LUCI] phones line support
Factory-like firmware reading now supported [LUCI]
XML-scatter generation now supported [LUCI]
Android 13 support activated [under test]
Android 12 support improved
Android 10-11 support rebuild
AB devices support complete rebuild. All known formats supported.
More accurate detection of vendor-specific partitions and handling
Escape from OTA issues and other startup faults etc. on some phones

Scatter creation for latest devices revised, more chip-depend versions now supported

Firmware flasher:
NEXTGEN phones line support [LUCI]
Factory and Read firmware flashing now supported [LUCI]
XML scatter, TXT scatter and flash.xml can be used as FlashFile input

Service:
Identify : Now read active system info if device belong to AB
BootLoader: Unlock and Lock as separate buttons now
BootLoader: Unlock in FireFly mode for LEGACY phones has been fixed
BootLoader: Unlock in FireFly mode for some of RAPHAEL phones has been fixed
MemoryTool: LUCI support, compatibility improvements

The Rest:
- Loaders storage structure updated
[built-in] /boot/0_base/X_FireFly/ => /boot/XFireFly/base/
[boot-pack] /boot/0_base/MT6570_*/ => /boot/0_rare/MT6570_*/
[boot-pack] /boot/0_base/MT6771/ => /boot/Vivo/MT6771/
- Loaders package updated
[built-in] /boot/0_base/base_v2216/
- Bases and Models list sort order revised
- Firmware version parser revised
- Error messages and usage hints updated
- eMMC EOL status hints updated
- Update checker revised
Required Dongle firmware version: 0154

https://infinity-box.com/news/?r=4284

Re: Software Updates and News

Posted: 30 Jan 2023, 23:34
by Support
Infinity #CM2SP2 Diag Helper tool v1.04

Use it in case of DIAG/SVC mode failure with latest SPD devices.
Wipe, User Data and Security Code Reset: several types of devices handling improved
Dongle is not required, just run and use for free

https://infinity-box.com/?r=100209

Re: Software Updates and News

Posted: 30 Jan 2023, 23:35
by Support
Infinity #CM2MT2 boot-pack v2.40 with updated loaders

Loaders & structure updated

[+] Condor
[+] Dlight
[+] Xiaomi/Redmi-9c/ linked to base-2112 + preloader file from /Redmi-9/
[+] Xiaomi/Redmi-9a/ updated with preloader file from /Redmi-9/
[+] legacy loaders moved to /0_rare/
[+] /0_base/v17xx/ moved to boot-pack
[+] /0_base/v18xx/ moved to boot-pack
[+] /0_base/v19xx/ moved to boot-pack
[+] /0_base/v20xx/ moved to boot-pack

CM2MT2 v2.39 and higher should be used with the next loaders:
[+] Infinix/Infinix-G99-General/
[+] Infinix/Dimensity-9000/
[+] Infinix/X676B/
[+] Tecno/Tecno-G99-General/
[+] Tecno/Dimensity-9000/
[+] Tecno/Phantom-X2-X2Pro/
[+] /0_generic/ loaders for latest MT6781/MT6789/MT6983 are inside sw installer

Latest boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders

https://infinity-box.com/?r=100188