Software Updates and News

Post Reply
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash

As ordinary, unique functions and methods released

Core
Changed : FlashCore Protocol updated
Changed : DiagCore Protocol updated
Changed : NAND protocol adaptation
Changed : Operations speed increased

Flasher
Changed : Flash Engine updated
Changed : Handling for 64bit files optimized
Changed : Activated FastFlash V1 protocol *
Changed : Activated FastFlash V2 protocol *
!* FastFlash protocol allow increase flashing speed for big unsparsed images
!* FastFlash protocol reduce flashing time up to 4-6 times, depend on device configuration - 3-4 minutes against 20-25
!* FastFlash activated automatically, if can be performed
!* GOOD USB cable and GOOD USB port must be used - do not use USB HUBs !
Changed : Support for new PAC formats activated: v2.x.x line

Service
Changed : Identify scheme : Read more accurate and complete info *
!* Include modern Android 9 and Android 10 devices
Changed : Precise FileSystem settings detection ( Type and Encryption algo )
Changed : Better security detection
Changed : Format FS / Reset settings updated

Firmware Reader
Changed : Reading speed up to 30% faster ! *
!* Test feature, support modern UniSoc devices: SC7731E, SC9832E, SC9863
!* Test feature, only RS-featured loaders supported !
Changed : Android 10 support activated! *
!* Support latest Android 9 and modern Android 10 devices from now!
!* Allow read complete firmware image from Android 10 devices without loss any ota/vendor abilities
Changed : X64 devices/loaders native support activated for complete reading
Changed : SW now create Android-version depend images for better compatibility
Changed : SW now create correct FileSystems bundle according device settings *
!* Almost reducing "hang" case after flashing
Changed : Improved structure identification
Changed : Support more different types
Changed : Structure identification and NAND reader more stable now (complete E-series NAND adaptation is on the way)

Model DB
Changed : New loaders included for various set of devices
Changed : New Generic loaders included and updated existing ones

Other
Changed : Removed outdated options from platform tab, many options changed to atomatic mode
BugFix : Minor changes and fixes

Info :
Android 10 enabled devices : SC7731E, SC9832E, SC9863
FastFlash enabled devices : SC9832E, SC9863

https://www.infinity-box.com/news/?r=4020
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 MTK/Mediatek v2.15 - New models and features

As ordinary, unique functions and methods released

Core
Changed : Loader v2028 supported and tested ( v2020 skipped, unstable )
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MT8167 supported ( AutoBoot, SelfLearn supported )
BugFix : MT8163 support should be fixed

Flasher
Changed : UltraFlash - UNIQUE FEATURE !
Changed : UltraFlash : It is possible to fix Almost all SECURITY-related (PUBKEY etc. verify/missmatch) errors ( Mostly when wrong DA used on EFUSED models )
!* Feature may not work for some "exotic" secure/da/fuse configurations and cases !
!* Feature not work with "remote authentificated" devices yet !

Service
Changed : Identify
!* Better AndroidInfo extraction, activated check and filter of similar fields
!* It is possible to read more different info about device, if possible ( can be activated from settings )
Changed : Smart Reset
!* Optimized support for different customized and generic cases

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types
Changed : More careful checking of vendor, security and ota-specific data
Changed : DevInfo ( FWname ) creation optimized
Changed : Slow devices reading revised ( MT8167, MT6570, MT6580 and similar )
!* It is strongly recommend to enable autoupdate or use latest MT2 version to service latest Android 9/10 phones/tablets !

MemoryTool
Changed : Bugfixes and optimizations

Model DB
Changed : New agents included for various set of devices ( Alcatel, Moto, Acer, Generic )
Changed : DB revision done, some issues fixes

Other
BugFix : Many minor changes and fixes

https://www.infinity-box.com/news/?r=4021
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.09 - MTK, SPD, RDA updated and more improvements

Data extraction based on full reconstruction of file system

- MTK module improved - more device supported
- SPD module updated - SPD66x0 support released
- RDA module updated - more Code pages supported
- GUI updated and improved
- Minor bugs fixed

https://www.infinity-box.com/news/?r=4023
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features activated

As ordinary, unique functions and methods released

Core
Changed : FlashCore Protocol updated
BugFix : SC9832E line support updated
BugFix : SC9820E line support updated
BugFix : SC9863x line support updated
NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
Changed : All service features speed under FlashMode increased

Flasher
Changed : Flash Engine updated
Changed : FastFlash protocol updated

Service
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices

Firmware Reader
Changed : Complete FWReader rebuild to cover most count of different devices, existing on market *
!* Almost all Flashing issues has been fixed, FWRead repeat required for problematic cases/models!
Changed : UltraReading option activated ! *
!* Now reading of UniSoc devices 3-5 times faster, than before
- approx 20 mins instead of 70 for SC9853i (2.2 GiB) comparing to older releases
- approx 12 mins instead of 40 for SC9832E (2.5 GiB) comparing to older releases
- approx 20 mins instead of 60 for SC9863 (4.4 GiB) comparing to older releases
- approx 15 mins instead of 50 for SC7731 (1.5 GiB) comparing to older releases
!* Most generic loaders now support FastReading ( RS,SS,0S,1S,2S )
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !
Changed : Improved structure identification
Changed : Support more different types
Changed : Android 10 devices support improved

Model DB
Changed : New Generic loaders included and updated existing ones
Changed : SC9820E(eMMC), SC9832E, SC9863x loaders updated

Other
BugFix : Minor changes and fixes
Changed : Power Reset/Switch off scenario operation-depend now
Option : GUI ( File -> GUI ) : Allow select other interface mode*
!* Default interface - standard V2 line GUI
!* Wide interface - best for big screen / big distance to monitor
!* Wide log - extend log window to screen size - optimal for most cases

https://www.infinity-box.com/news/?r=4024
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
BugFix : MT6737M/MT6580
Changed : Internal EMI engine rebuild
!* LEGACY line : DB rebuild and updated, changed and optimized selection features
!* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic.
Summary :
!* Supported almost all existing memory/dram combinations up to current date for LEGACY lines
!* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line )
!* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto.
!* In rare case of discrette DRAM may require change EMI once for some specific devices
!* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation
!* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work!

Flasher
Changed : Core updated for LEGACY line
BugFix : MT6737 with Android 10 flashing revised
BugFix : Checksum verify rebuild
BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs )
BugFix : Different scatter-version dependencies handled now correct
Changed : Core updated for RAPHAEL line
Changed : UltraFlash feature updated, new security workarounds supported

Service
Changed : Identify
!* Legacy platform changes, mostly for Android 10 devices
Changed : Smart Reset
!* Optimized support for different customized and generic cases

NewFeature : HW Report ( RAPHAEL - only )

!* Allow read extended info from device about its HW
- EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes
- CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents, even on same SoC!


Firmware Reader
Changed : LEGACY line support updated ( Android 10 line )
Changed : Support more different types
Changed : FileSystem tools updated. Issues with reading on some systems should be fixed.
Changed : More wide range of scatter versions creation according device specific data

Other
BugFix : Lot of minor changes and fixes
Option : GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases

Info
!* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues
- FOTA issues
- Attestation Key Issues
- Tee Key issues
- Security issues

https://www.infinity-box.com/news/?r=4034
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.10 - MTK, SPD updated and more improvements

- MTK module updated (Added all files extraction)
- SPD module improved and updated
- FileSystem library updated (Full support all FAT versions)
- Added Function - Save FileSystem (as per users request)
- v1.08/v1.09 SPD detection failure bug fixed
- Minor bugs fixed

https://www.infinity-box.com/news/?r=4037
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.08 - NAND, Forensic and more features !

As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated
Changed : NAND support rebuild
Changed : X64 SS/RS loader line handling optimized
NewSOC : SC9820E with NAND support
NewSOC : SC7731E with NAND support

Flasher
Changed : NAND support rebuild
Changed : Big files handling optimized
Changed : NVM manager updated

Firmware reader
NewFeature : UniSoc NAND SC9820E/SC7731E support activated !
- Allow backup FW from range of phones, based on SC9820E/SC7731E SoC with NAND flash memory
- Firmware is complete, not damage any security, ota or any other compatibility
Changed : Improved structure identification
Changed : Forced reading ( disable deep verify ) option enabled - Use WITH CAUTION!
Changed : Android 4.x / Mocor 5 specific changes
Changed : UBI defragmentation for NAND devices activated by default

Service
NewFeature : Security Repair allow change BT/WiFi MAC
- Useful only in DiagMode for UniSoc(E-line), Flash/Diag for SPRD line
Changed : Security Repair options - Generate MAC's - double click at MAC field to generate and activated
Changed : Security Repair options - AutoIncremental set SEC2/SEC3 fields, when SEC1 set. Just double click in next field
Changed : Security Repair : NVM Manager updated according latest devices changes
Changed : Identify : Support identify for UniSoc NAND line
Changed : Identify : NAND identify speed increased

UserData
Changed : Privacy reading types increased to 4 ( +2 new types )
NewFeature : UserData DeepVerify and DUMP activated!
- Available for users with active Infinity Data Explorer module!
- Ignore ALL sprd protocol limitations, which require MEMORY DESOLDER and EXTERNAL MEMORY PROGRAMMER using!
- Allow verify and dump COMPLETE USER image for wide range of types and filesystems
1. eMMC with EXT3/EXT4 filesystem. FDE check may differs from Identify!
2. eMMC with F2FS filesystem. FDE check may differs from Identify!
3. NAND with UBIFS. Result image defragmented and prepared for further forensic analyze
- Internal checks during dumping make differ, than Identify option, analysis. Even if Identify say FDE - device can be not encrypted.
- Ability to resume dumping in case of read fails, can be used much times, as need
- After dumping device must be flashed!
1. Get FW or make FW backup from WORKING/GOOD device with complete options if SW asks
2. Complete Flash device
or
2. If need revert device to initial state
2.1 : Select FW, uncheck all items ( Rmouse - > Uncheck all )
2.2 : Select UBOOT/SPL
2.3 : All other settings must be default, not touch anything
2.4 : Flash device

Model DB
Changed : New generic loaders included, changes some existing once for better compatibility
Changed : Generic SC9820E NAND loaders included
Changed : Generic SC7731E NAND loaders included

QIN QF9 ( QIN1 SC9820E ) - full support : Read/Write FW,Reset Settings,Security,Service
- Firmware can be found on support area
- Boot key : Call button
- Change Lang sequence : Ok, Left, down, ok, 15 times - down, ok, ok, select need language ( English )

https://www.infinity-box.com/news/?r=4047
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.09 - SPUnlock for most SPD/UniSoc

As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated

Flasher
Changed : NVM manager updated. Recovery mode rebuild

Firmware reader
Changed : SPRD Android 4.x line minor changes
Changed : Improved structure identification
Changed : New types supported (Android 9/10)

Service
New Feature: SP (Network) Unlock activated !
- Support Legacy SPRD phones on SC7715/SC7731/SC9820/SC9832/SC9850
- Support modern UniSoc phones on SC9820e/SC7731e/SC9832e/SC9850/SC9853i/SC9863
- Support unlock in FlashMode ( ! recommended way, permanent )
- Support unlock in DiagMode ( ! may relock in some certain cases )
- Support unlock for signed and unsigned devices
-- Unsigned/Legacy devices supported standalone without server
-- Modern devices require server support
Test reports and free unlock for testers are HERE
Changed : NVM manager updated ( Read/Write process revised )

Other
- Setting tab activated
-- Allow setup user details to use remote/server functions
-- Allow select Firmware path
- Changed default paths for different operations
- Minor changes and fixes

https://www.infinity-box.com/support/?r=100136
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

iosFileUploader v1.10 released

- check uploaded file firmware version by server database
- minor bugs fixed
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle II SCR/SPD-RDA v1.07 - RDA8955x CPU line supported

As ordinary, unique functions and methods released

RDA8955x is an extra cheap SoC with 2G/GPS support.
It is used in cheap wearable, IoT and feature phones.

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC770x ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC770x
RDA Mirco: RDA8955G, RDA8955GE, RDA8955L
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

Core
NewChip: Support RDA 8955 Line (8955G, 8955GE, 8955L)
BugFix: Support for some SC6533 revisions fixed ( Wrong PMT issue )

Support RDA 8955 Line (8955G, 8955GE, 8955L)
- Identify ( Security info, compilation info, Hwinfo )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
- Read Flash / FW
- Write Flash / FW / LOD

Service
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: BOOTROM support improved ( RDA )
Changed: SVC ( Diag ) mode support optimized for modern UniSoc 89xx platforms

UserData
Changed: Security code read in FlashMode revised ( RDA )

Other
BugFix: Lot of small different changes and fixes
Option: GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features !

As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated
NewSOC: UniSOC Tiger T61x series support
NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support
NewSOC: SC7731E Android 10 / FastProto supported
NewSOC: SC9832E Android 10 / FastProto supported

Flasher
Changed : Protocol updated
Changed : NVM manager updated
Changed : FastFlash protocol updated ( SC7731E, SC9832E supported )

Firmware reader
Changed : Android 10 specific changes
Changed : Initial Tiger and NaT devices support
Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now )

Service
NewFeature: Security Repair allow change PSN1/PSN2
- In newer devices PSN1/2 damage may lead to bootlop, ota and other issues
- In newer devices PSN1/2 used as bootloader token
Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices
Changed : Identify : Read PSN1 and PSN1
Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode)
Changed : Repair : Identify signed devices during repair
Changed : NVM : Read and Write operations revised

UserData
Changed : UserData dump feature updated ( Legacy line fixes )

SPUnlock
Changed : SC9863 support updated
Changed : SC9832 support updated
Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try )
NewFeature: Error codes explanation and hints
NewFeature: Damaged devices ( security destroyed ) detection
NewFeature: Damaged devices ( permLock ) detection

Model DB
Changed : New generic loaders included for SC7731E with Android 10 ( 0S type )
Changed : New generic loaders included for SC7792E with Android 10 ( 0S type )
Changed : New generic loaders included for Tiger T61x
Changed : New generic loaders included for UIS7862
Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants

Other
Changed : GUI settings now stored and load select style, settings and other at next run
Changed : Lot of different changes and fixes
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.11 - MTK, SPD updated and more improvements

Data extraction based on full reconstruction of file system

- MTK module updated - added Call List extraction for some models
- SPD firmware structure detection improved, important algos and methods updated
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone auth ON

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewFeature: Standalone SLA/Auth [Raphael] **
Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild

Flasher
Changed: Core updated for RAPHAEL line
Changed: UltraFlash feature updated, new security workarounds supported

Service
Changed: Identify
!* Read new Android 10 specific fields, vendor-specific fields
Changed: Smart Reset
!* Optimized support for different customized and generic cases

Changed: HW Report ( RAPHAEL - only )
!* UFS line devices now supported with following features:
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
- Partitioning details and other
- HWreport log saving enabled ( for further analyze )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !

Firmware Reader
Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme )
Changed : New types supported

Other
BugFix : Many different minor changes and fixes
Changed : Generic protocol rebuild

Info
!**
- Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support
- You can boot ( with supported SoC ) device with any generic da and perform any need operations
- Support MT6765 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
- Support MT6785 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing

NOTE: special boot-helper tool should be installed - included in CM2MT2 package

https://www.infinity-box.com/support/?r=100139
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 )
NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported
NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported

Flasher
Changed: Core updated for RAPHAEL line

Service
Changed: META core updated

Changed: HW Report ( RAPHAEL - only )
- LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck !
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init)
!* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !

Firmware Reader
Changed: Some modern brand-specific changes (Oppo, Realme)
Changed: New types supported
Changed: Internal Database updated

Model DB
Changed: New agents included for Tecno, Infinix ( with different SoC lines )
Changed: New DA base v2044 included

Other
Changed: GUI settings now stored and load select style, settings and other at next run
Changed: Environment compatibility issue with 32 bit OS has been fixed
Changed: Many different changes and fixes

https://www.infinity-box.com/news/?r=4075
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 MTK/MediaTek v2.19 - Standalone MTK auth ON - NEW CPU

As ordinary, unique functions and methods released

Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6580 with any security configuration supported standalone !
AUTH: MT6735 with any security configuration supported standalone !
AUTH: MT6737 with any security configuration supported standalone !
AUTH: MT6731 with any security configuration supported standalone !
AUTH: MT6739 with any security configuration supported standalone !
AUTH: MT6750 with any security configuration supported standalone !
AUTH: MT6755 with any security configuration supported standalone !
AUTH: MT6757 with any security configuration supported standalone !
AUTH: MT6761 with any security configuration supported standalone !
AUTH: MT6762 with any security configuration supported standalone !
AUTH: MT6763 with any security configuration supported standalone !
AUTH: MT6765 with any security configuration supported standalone !
AUTH: MT6771 with any security configuration supported standalone !
AUTH: MT6785 with any security configuration supported standalone !
AUTH: MT6795 with any security configuration supported standalone !
AUTH: MT6797 with any security configuration supported standalone !
AUTH: MT8163 with any security configuration supported standalone !
Changed: BootHelper package updated
- Automatic Self-Learning function activated
- Do not need to make HWreport anymore before other operations in most cases !

Service:
Changed: META core updated
Changed: Security repair features rebuild. Bugfixes.

Firmware Reader:
Changed: Some modern brand-specific changes (Vivo, Meizu)
Changed: New types supported
Changed: Internal Database updated

Other:
Changed: Many different changes and fixes

Info:
Alternative MTK drivers package uploaded to support are, intstall it if you have any kind of connectivity issues

https://www.infinity-box.com/news/?r=4079
Post Reply