Software Updates and News
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features !
As ordinary, unique functions and methods released
Core
Changed : FlashCore protocol updated
NewSOC: UniSOC Tiger T61x series support
NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support
NewSOC: SC7731E Android 10 / FastProto supported
NewSOC: SC9832E Android 10 / FastProto supported
Flasher
Changed : Protocol updated
Changed : NVM manager updated
Changed : FastFlash protocol updated ( SC7731E, SC9832E supported )
Firmware reader
Changed : Android 10 specific changes
Changed : Initial Tiger and NaT devices support
Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now )
Service
NewFeature: Security Repair allow change PSN1/PSN2
- In newer devices PSN1/2 damage may lead to bootlop, ota and other issues
- In newer devices PSN1/2 used as bootloader token
Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices
Changed : Identify : Read PSN1 and PSN1
Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode)
Changed : Repair : Identify signed devices during repair
Changed : NVM : Read and Write operations revised
UserData
Changed : UserData dump feature updated ( Legacy line fixes )
SPUnlock
Changed : SC9863 support updated
Changed : SC9832 support updated
Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try )
NewFeature: Error codes explanation and hints
NewFeature: Damaged devices ( security destroyed ) detection
NewFeature: Damaged devices ( permLock ) detection
Model DB
Changed : New generic loaders included for SC7731E with Android 10 ( 0S type )
Changed : New generic loaders included for SC7792E with Android 10 ( 0S type )
Changed : New generic loaders included for Tiger T61x
Changed : New generic loaders included for UIS7862
Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants
Other
Changed : GUI settings now stored and load select style, settings and other at next run
Changed : Lot of different changes and fixes
As ordinary, unique functions and methods released
Core
Changed : FlashCore protocol updated
NewSOC: UniSOC Tiger T61x series support
NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support
NewSOC: SC7731E Android 10 / FastProto supported
NewSOC: SC9832E Android 10 / FastProto supported
Flasher
Changed : Protocol updated
Changed : NVM manager updated
Changed : FastFlash protocol updated ( SC7731E, SC9832E supported )
Firmware reader
Changed : Android 10 specific changes
Changed : Initial Tiger and NaT devices support
Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now )
Service
NewFeature: Security Repair allow change PSN1/PSN2
- In newer devices PSN1/2 damage may lead to bootlop, ota and other issues
- In newer devices PSN1/2 used as bootloader token
Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices
Changed : Identify : Read PSN1 and PSN1
Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode)
Changed : Repair : Identify signed devices during repair
Changed : NVM : Read and Write operations revised
UserData
Changed : UserData dump feature updated ( Legacy line fixes )
SPUnlock
Changed : SC9863 support updated
Changed : SC9832 support updated
Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try )
NewFeature: Error codes explanation and hints
NewFeature: Damaged devices ( security destroyed ) detection
NewFeature: Damaged devices ( permLock ) detection
Model DB
Changed : New generic loaders included for SC7731E with Android 10 ( 0S type )
Changed : New generic loaders included for SC7792E with Android 10 ( 0S type )
Changed : New generic loaders included for Tiger T61x
Changed : New generic loaders included for UIS7862
Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants
Other
Changed : GUI settings now stored and load select style, settings and other at next run
Changed : Lot of different changes and fixes
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Data Explorer v1.11 - MTK, SPD updated and more improvements
Data extraction based on full reconstruction of file system
- MTK module updated - added Call List extraction for some models
- SPD firmware structure detection improved, important algos and methods updated
- Minor bugs fixed
https://www.infinity-box.com/support/?r=100089
Data extraction based on full reconstruction of file system
- MTK module updated - added Call List extraction for some models
- SPD firmware structure detection improved, important algos and methods updated
- Minor bugs fixed
https://www.infinity-box.com/support/?r=100089
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone auth ON
As ordinary, unique functions and methods released
Core
Changed : Protocol updated ( Raphael/Legacy )
NewFeature: Standalone SLA/Auth [Raphael] **
Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild
Flasher
Changed: Core updated for RAPHAEL line
Changed: UltraFlash feature updated, new security workarounds supported
Service
Changed: Identify
!* Read new Android 10 specific fields, vendor-specific fields
Changed: Smart Reset
!* Optimized support for different customized and generic cases
Changed: HW Report ( RAPHAEL - only )
!* UFS line devices now supported with following features:
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
- Partitioning details and other
- HWreport log saving enabled ( for further analyze )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !
Firmware Reader
Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme )
Changed : New types supported
Other
BugFix : Many different minor changes and fixes
Changed : Generic protocol rebuild
Info
!**
- Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support
- You can boot ( with supported SoC ) device with any generic da and perform any need operations
- Support MT6765 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
- Support MT6785 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
NOTE: special boot-helper tool should be installed - included in CM2MT2 package
https://www.infinity-box.com/support/?r=100139
As ordinary, unique functions and methods released
Core
Changed : Protocol updated ( Raphael/Legacy )
NewFeature: Standalone SLA/Auth [Raphael] **
Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild
Flasher
Changed: Core updated for RAPHAEL line
Changed: UltraFlash feature updated, new security workarounds supported
Service
Changed: Identify
!* Read new Android 10 specific fields, vendor-specific fields
Changed: Smart Reset
!* Optimized support for different customized and generic cases
Changed: HW Report ( RAPHAEL - only )
!* UFS line devices now supported with following features:
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
- Partitioning details and other
- HWreport log saving enabled ( for further analyze )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !
Firmware Reader
Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme )
Changed : New types supported
Other
BugFix : Many different minor changes and fixes
Changed : Generic protocol rebuild
Info
!**
- Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support
- You can boot ( with supported SoC ) device with any generic da and perform any need operations
- Support MT6765 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
- Support MT6785 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
NOTE: special boot-helper tool should be installed - included in CM2MT2 package
https://www.infinity-box.com/support/?r=100139
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 )
NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported
NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported
Flasher
Changed: Core updated for RAPHAEL line
Service
Changed: META core updated
Changed: HW Report ( RAPHAEL - only )
- LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck !
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init)
!* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !
Firmware Reader
Changed: Some modern brand-specific changes (Oppo, Realme)
Changed: New types supported
Changed: Internal Database updated
Model DB
Changed: New agents included for Tecno, Infinix ( with different SoC lines )
Changed: New DA base v2044 included
Other
Changed: GUI settings now stored and load select style, settings and other at next run
Changed: Environment compatibility issue with 32 bit OS has been fixed
Changed: Many different changes and fixes
https://www.infinity-box.com/news/?r=4075
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 )
NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported
NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported
Flasher
Changed: Core updated for RAPHAEL line
Service
Changed: META core updated
Changed: HW Report ( RAPHAEL - only )
- LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck !
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init)
!* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !
Firmware Reader
Changed: Some modern brand-specific changes (Oppo, Realme)
Changed: New types supported
Changed: Internal Database updated
Model DB
Changed: New agents included for Tecno, Infinix ( with different SoC lines )
Changed: New DA base v2044 included
Other
Changed: GUI settings now stored and load select style, settings and other at next run
Changed: Environment compatibility issue with 32 bit OS has been fixed
Changed: Many different changes and fixes
https://www.infinity-box.com/news/?r=4075
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.19 - Standalone MTK auth ON - NEW CPU
As ordinary, unique functions and methods released
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6580 with any security configuration supported standalone !
AUTH: MT6735 with any security configuration supported standalone !
AUTH: MT6737 with any security configuration supported standalone !
AUTH: MT6731 with any security configuration supported standalone !
AUTH: MT6739 with any security configuration supported standalone !
AUTH: MT6750 with any security configuration supported standalone !
AUTH: MT6755 with any security configuration supported standalone !
AUTH: MT6757 with any security configuration supported standalone !
AUTH: MT6761 with any security configuration supported standalone !
AUTH: MT6762 with any security configuration supported standalone !
AUTH: MT6763 with any security configuration supported standalone !
AUTH: MT6765 with any security configuration supported standalone !
AUTH: MT6771 with any security configuration supported standalone !
AUTH: MT6785 with any security configuration supported standalone !
AUTH: MT6795 with any security configuration supported standalone !
AUTH: MT6797 with any security configuration supported standalone !
AUTH: MT8163 with any security configuration supported standalone !
Changed: BootHelper package updated
- Automatic Self-Learning function activated
- Do not need to make HWreport anymore before other operations in most cases !
Service:
Changed: META core updated
Changed: Security repair features rebuild. Bugfixes.
Firmware Reader:
Changed: Some modern brand-specific changes (Vivo, Meizu)
Changed: New types supported
Changed: Internal Database updated
Other:
Changed: Many different changes and fixes
Info:
Alternative MTK drivers package uploaded to support are, intstall it if you have any kind of connectivity issues
https://www.infinity-box.com/news/?r=4079
As ordinary, unique functions and methods released
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6580 with any security configuration supported standalone !
AUTH: MT6735 with any security configuration supported standalone !
AUTH: MT6737 with any security configuration supported standalone !
AUTH: MT6731 with any security configuration supported standalone !
AUTH: MT6739 with any security configuration supported standalone !
AUTH: MT6750 with any security configuration supported standalone !
AUTH: MT6755 with any security configuration supported standalone !
AUTH: MT6757 with any security configuration supported standalone !
AUTH: MT6761 with any security configuration supported standalone !
AUTH: MT6762 with any security configuration supported standalone !
AUTH: MT6763 with any security configuration supported standalone !
AUTH: MT6765 with any security configuration supported standalone !
AUTH: MT6771 with any security configuration supported standalone !
AUTH: MT6785 with any security configuration supported standalone !
AUTH: MT6795 with any security configuration supported standalone !
AUTH: MT6797 with any security configuration supported standalone !
AUTH: MT8163 with any security configuration supported standalone !
Changed: BootHelper package updated
- Automatic Self-Learning function activated
- Do not need to make HWreport anymore before other operations in most cases !
Service:
Changed: META core updated
Changed: Security repair features rebuild. Bugfixes.
Firmware Reader:
Changed: Some modern brand-specific changes (Vivo, Meizu)
Changed: New types supported
Changed: Internal Database updated
Other:
Changed: Many different changes and fixes
Info:
Alternative MTK drivers package uploaded to support are, intstall it if you have any kind of connectivity issues
https://www.infinity-box.com/news/?r=4079
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.20 - Standalone MTK auth ON - NEW CPU
As ordinary, unique functions and methods released
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6752 with any security configuration supported standalone !
AUTH: MT6753 with any security configuration supported standalone !
AUTH: MT6768 with any security configuration supported standalone !
AUTH: MT6757 support improved/fixed
Service:
Changed: Identify procedure revised
- Support modern Android 10 devices
- Support for Android 11 devices activated
Changed: SmartReset procedure
- Support modern Android 10 devices
- Support for Android 11 devices activated
Firmware Reader:
Changed: Android 10 specific changes for modern devices
Changed: Android 11 initial support
Changed: New types supported
Changed: Internal Database updated
ModelDB:
Changed: Some specific and brand list update
Other:
Changed: Many different changes and fixes
https://www.infinity-box.com/news/?r=4082
As ordinary, unique functions and methods released
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6752 with any security configuration supported standalone !
AUTH: MT6753 with any security configuration supported standalone !
AUTH: MT6768 with any security configuration supported standalone !
AUTH: MT6757 support improved/fixed
Service:
Changed: Identify procedure revised
- Support modern Android 10 devices
- Support for Android 11 devices activated
Changed: SmartReset procedure
- Support modern Android 10 devices
- Support for Android 11 devices activated
Firmware Reader:
Changed: Android 10 specific changes for modern devices
Changed: Android 11 initial support
Changed: New types supported
Changed: Internal Database updated
ModelDB:
Changed: Some specific and brand list update
Other:
Changed: Many different changes and fixes
https://www.infinity-box.com/news/?r=4082
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.21 - MT67xx and MT81xx ON !
As ordinary, unique functions and methods released
With this update we finishing following achievements:
Complete MT67xx line support !
Complete MT81xx line support !
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6779 with any security configuration supported standalone !
AUTH: MT6799 with any security configuration supported standalone !
AUTH: MT8127 with any security configuration supported standalone !
AUTH: MT8167 with any security configuration supported standalone !
AUTH: MT8172 with any security configuration supported standalone !
AUTH: MT8173 with any security configuration supported standalone !
Changed: BootHelper updated
- Automatic Self-Learning function improved
Changed: EMI manager updated, most modern devices support has been included
Flasher:
Changed: Core updated for RAPHAEL line
Firmware Reader:
Changed: New types supported
Changed: Internal Database updated
ModelDB:
Changed: Some specific and brand list update
Other:
Changed: Different changes and fixes
Installer:
[*] Installer become more compact and now contain two parts: required and optional
[*] Optional Installer CM2MT2-boot-pack contain optional (legacy) boot files
https://www.infinity-box.com/news/?r=4085
As ordinary, unique functions and methods released
With this update we finishing following achievements:
Complete MT67xx line support !
Complete MT81xx line support !
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6779 with any security configuration supported standalone !
AUTH: MT6799 with any security configuration supported standalone !
AUTH: MT8127 with any security configuration supported standalone !
AUTH: MT8167 with any security configuration supported standalone !
AUTH: MT8172 with any security configuration supported standalone !
AUTH: MT8173 with any security configuration supported standalone !
Changed: BootHelper updated
- Automatic Self-Learning function improved
Changed: EMI manager updated, most modern devices support has been included
Flasher:
Changed: Core updated for RAPHAEL line
Firmware Reader:
Changed: New types supported
Changed: Internal Database updated
ModelDB:
Changed: Some specific and brand list update
Other:
Changed: Different changes and fixes
Installer:
[*] Installer become more compact and now contain two parts: required and optional
[*] Optional Installer CM2MT2-boot-pack contain optional (legacy) boot files
https://www.infinity-box.com/news/?r=4085
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.11 - Unlock, Repair, New CPU
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated
NewSOC: UMS9117 support ( service mode )
Flasher
Changed: Protocol updated
Changed: NVM manager updated
Firmware reader
Changed: Android 10 specific changes
Changed: UltraRead protocol updated
Changed: New types supported
Service
Changed: Repair : Security Repair allow now repair signed devices
- Permanent lock and other issues can be also fixed with that feature
- Repair can be done in Flash and Diag mode
- Repair support new security devices as well ( Android 10 + )
Changed: Repair : UMS9117 repair security support activated ( Nokia line supported included )
Changed: Identify : Enabled Read All Info by default under FlashMode
Changed: FormatFS : UMS9117 Reset/Format FS support activated
SPUnlock
Changed: UMS9117 support activated ( Nokia line supported included )
Changed: SC9863, SC9832 support improved
Other
Changed: Many internal changes and fixes
Drivers: UMS9117 drivers are at support area
https://www.infinity-box.com/news/?r=4092
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated
NewSOC: UMS9117 support ( service mode )
Flasher
Changed: Protocol updated
Changed: NVM manager updated
Firmware reader
Changed: Android 10 specific changes
Changed: UltraRead protocol updated
Changed: New types supported
Service
Changed: Repair : Security Repair allow now repair signed devices
- Permanent lock and other issues can be also fixed with that feature
- Repair can be done in Flash and Diag mode
- Repair support new security devices as well ( Android 10 + )
Changed: Repair : UMS9117 repair security support activated ( Nokia line supported included )
Changed: Identify : Enabled Read All Info by default under FlashMode
Changed: FormatFS : UMS9117 Reset/Format FS support activated
SPUnlock
Changed: UMS9117 support activated ( Nokia line supported included )
Changed: SC9863, SC9832 support improved
Other
Changed: Many internal changes and fixes
Drivers: UMS9117 drivers are at support area
https://www.infinity-box.com/news/?r=4092
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.22 - New models and features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (for Raphael/Legacy SoC)
Changed: Loader v2112 supported and tested
Changed: MediaTek MT6757 support revised
Changed: StandAlone SLA now activated in automatic mode for phones that need it
Changed: Driver dependency is not important any more, it gives more flexibility and more stable operations
Changed: EMI DB updated, BootHelper updated
NewChip:: MT3561/MT3561S supported (CardHeadUnit)
Flasher
Changed: Core updated for RAPHAEL SoC line
Changed: UltraFlash engine updated
MemoryTool
Changed: Long-range reading (over 32+ GB) optimized ( in most cases for Forensic cases )
Changed: LEGACY support revised
Service
Changed: SmartReset function process updated
Changed: New SmartReset mode activated - SmartReset Extra
! SmartReset Extra acts like ordinary ones but makes additional operations for specific brands:
- Reset MiAcc for Xiaomi ( non-permanent )
- Reset FlyMe acc for Meizu
! Other vendor-specific scripts can be included by users requests
Feature: "Restore Backup" option activated ( see Security tab )
! Automatic restore backup for connected device if this backup was already created earlier by Identify, Settings -> Autobackup option
Firmware Reader
Changed: Android 11 specific changes
Changed: Brand-specific changes and fixes
Changed: Better sparse handling
Changed: New types supported
Changed: Internal Database updated
Model DB
Changed: Changed acting model to semi-auto
! In most cases it is enough just to select required operation and connect devices ( BROM mode preferable )
! In some situations it may need to select older BASE DA for older SoCs ( LEGACY ones, since they are outdated )
Changed: New DA base v2112 included
Other
Changed: Number of small changes and fixes
Changed: Some unused options and checkboxes has been removed as deprecated, UI become easier
https://www.infinity-box.com/news/?r=4116
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (for Raphael/Legacy SoC)
Changed: Loader v2112 supported and tested
Changed: MediaTek MT6757 support revised
Changed: StandAlone SLA now activated in automatic mode for phones that need it
Changed: Driver dependency is not important any more, it gives more flexibility and more stable operations
Changed: EMI DB updated, BootHelper updated
NewChip:: MT3561/MT3561S supported (CardHeadUnit)
Flasher
Changed: Core updated for RAPHAEL SoC line
Changed: UltraFlash engine updated
MemoryTool
Changed: Long-range reading (over 32+ GB) optimized ( in most cases for Forensic cases )
Changed: LEGACY support revised
Service
Changed: SmartReset function process updated
Changed: New SmartReset mode activated - SmartReset Extra
! SmartReset Extra acts like ordinary ones but makes additional operations for specific brands:
- Reset MiAcc for Xiaomi ( non-permanent )
- Reset FlyMe acc for Meizu
! Other vendor-specific scripts can be included by users requests
Feature: "Restore Backup" option activated ( see Security tab )
! Automatic restore backup for connected device if this backup was already created earlier by Identify, Settings -> Autobackup option
Firmware Reader
Changed: Android 11 specific changes
Changed: Brand-specific changes and fixes
Changed: Better sparse handling
Changed: New types supported
Changed: Internal Database updated
Model DB
Changed: Changed acting model to semi-auto
! In most cases it is enough just to select required operation and connect devices ( BROM mode preferable )
! In some situations it may need to select older BASE DA for older SoCs ( LEGACY ones, since they are outdated )
Changed: New DA base v2112 included
Other
Changed: Number of small changes and fixes
Changed: Some unused options and checkboxes has been removed as deprecated, UI become easier
https://www.infinity-box.com/news/?r=4116
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.23 - New models and features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
NewSOC: ChipConfig for MT6833 activated ( under test )
Changed: BootHelper updated
Changed: Fixed SW reaction to conenction/power issues ( lags/stuck removed )
Changed: META core updated
! Allow connect from now to device, which already in META mode
! Identify by default not reboot device, other operations - reboot
Changed: Fixed Preloader mode handling on some driver versions
Changed: Fixed META init on some devices
Changed: SLA: Development feature to generate and send error reports automatically for unsupported devices
! No any data will be sent without user request
Flasher
Changed: UltraFlash engine updated
MemoryTool
Feature: Activated "Init GPT/PMT with resize" option
! Allow in some cases fix: Stuck/freeze/Rebooting issues on cheap encryption-enabled devices with cheap memory installed
! Issue found on MiPlay, some Infinix and other devices ( should work on more models range )
! Feature work by decrease UserData space size to avoid "bad blocks"
Service
Changed: SmartReset updated
Changed: SmartReset Extra mode updated
! SmartReset Extra acts like ordinary ones, but make additional, brand-required operations :
- Reset MiAcc for XIAOMI ( non-permanent )
- Reset FlyMe acc for MEIZU
- Reset DEMO mode on VIVO devices ( under test )
! Other, vendor-specific scripts can be included by users requests
Changed: "Restore Backup" option updated
! Clean and prepare files for correct restore in secure devices revised
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Other
Changed: Some general changes and fixes
Changed: Connection mode fixes
https://infinity-box.com/news/?r=4124
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
NewSOC: ChipConfig for MT6833 activated ( under test )
Changed: BootHelper updated
Changed: Fixed SW reaction to conenction/power issues ( lags/stuck removed )
Changed: META core updated
! Allow connect from now to device, which already in META mode
! Identify by default not reboot device, other operations - reboot
Changed: Fixed Preloader mode handling on some driver versions
Changed: Fixed META init on some devices
Changed: SLA: Development feature to generate and send error reports automatically for unsupported devices
! No any data will be sent without user request
Flasher
Changed: UltraFlash engine updated
MemoryTool
Feature: Activated "Init GPT/PMT with resize" option
! Allow in some cases fix: Stuck/freeze/Rebooting issues on cheap encryption-enabled devices with cheap memory installed
! Issue found on MiPlay, some Infinix and other devices ( should work on more models range )
! Feature work by decrease UserData space size to avoid "bad blocks"
Service
Changed: SmartReset updated
Changed: SmartReset Extra mode updated
! SmartReset Extra acts like ordinary ones, but make additional, brand-required operations :
- Reset MiAcc for XIAOMI ( non-permanent )
- Reset FlyMe acc for MEIZU
- Reset DEMO mode on VIVO devices ( under test )
! Other, vendor-specific scripts can be included by users requests
Changed: "Restore Backup" option updated
! Clean and prepare files for correct restore in secure devices revised
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Other
Changed: Some general changes and fixes
Changed: Connection mode fixes
https://infinity-box.com/news/?r=4124
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.24 - UniversalBoot and other features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved
NewFeature UniversalBoot: EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )
NewFeature UniversalBoot: AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!
!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required
Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated
MemoryTool
Changed: "Init GPT/PMT with resize" feature improved
Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Other
Changed: Some general changes and fixes
https://infinity-box.com/news/?r=4137
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved
NewFeature UniversalBoot: EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )
NewFeature UniversalBoot: AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!
!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required
Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated
MemoryTool
Changed: "Init GPT/PMT with resize" feature improved
Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Other
Changed: Some general changes and fixes
https://infinity-box.com/news/?r=4137
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.12 - New repair level activated
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated (R25)
Changed: New DL-core support (v10 at Infinity notation)
NewSOC: SC9820e [RS/0S] with NAND supported
Changed: Diag protocol updated
Flasher
Changed: Protocol updated
Changed: FlashCore rebuild
- Reworked FlashErase
- Reworked support of fully erased or semi-damaged modern devices Android 8/9/10/11 (SC9820e, SC7731e, SC9832e, SC9863, SC9850), it is possible to repair these devices from any state (in case of working HW)
- Reworked NVRecovery procedure
- Android version change ( Downgrade/Upgrade ) now work more correct
Firmware reader
Changed: Android 10 specific changes
Changed: KaiOs specific changes
Changed: Initial Android 11 support
Changed: UltraRead protocol updated
Changed: Fixed "Encryption Unsucessfull" errors on some devices after flash
SPUnlock
Changed: Android 11 SPunlock and Repair confirmed and working
Changed: UniSoc Tiger T310 initial SPUnlock/Repair support
Changed: Changed unlock procedure for some devices
Changed: Allow check status/continue unlock on zero balance
Almost all existing on market devices for SP-Unlock and Repair are supported, Android 10 / 11 "security" as well
Model DB
Changed: New generic loaders included for 9820E with NAND
Other
Changed: Many other different changes and fixes
https://infinity-box.com/news/?r=4145
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated (R25)
Changed: New DL-core support (v10 at Infinity notation)
NewSOC: SC9820e [RS/0S] with NAND supported
Changed: Diag protocol updated
Flasher
Changed: Protocol updated
Changed: FlashCore rebuild
- Reworked FlashErase
- Reworked support of fully erased or semi-damaged modern devices Android 8/9/10/11 (SC9820e, SC7731e, SC9832e, SC9863, SC9850), it is possible to repair these devices from any state (in case of working HW)
- Reworked NVRecovery procedure
- Android version change ( Downgrade/Upgrade ) now work more correct
Firmware reader
Changed: Android 10 specific changes
Changed: KaiOs specific changes
Changed: Initial Android 11 support
Changed: UltraRead protocol updated
Changed: Fixed "Encryption Unsucessfull" errors on some devices after flash
SPUnlock
Changed: Android 11 SPunlock and Repair confirmed and working
Changed: UniSoc Tiger T310 initial SPUnlock/Repair support
Changed: Changed unlock procedure for some devices
Changed: Allow check status/continue unlock on zero balance
Almost all existing on market devices for SP-Unlock and Repair are supported, Android 10 / 11 "security" as well
Model DB
Changed: New generic loaders included for 9820E with NAND
Other
Changed: Many other different changes and fixes
https://infinity-box.com/news/?r=4145
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.25 - MT68xx line, new models and features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (Raphael/Legacy)
NewSoC : MT6873 support activated
NewSoC : MT6885 support activated (under test)
Changed: BootHelper : core updated
Changed: FireFly : EMI updated
Changed: MT817x line support improved
Changed: Boot : HWinfo parsing improved
Changed : UniversalBoot : EMI Engine
! Selection rules updated
! By default during Flashing used FW as source
! EMI collecting speed optimized, now more faster on auth-enabled devices
! BootHelper <> FireFly interaction optimized
NewSoC : MT6873 supported features
! Standalone SLA : supported
! FireFly : EMI : supported
! META operations : supported
! Firmware Read : supported
! Firmware Write : supported
! Reset Settings : supported
! Reset FRP : supported
! Misc Operations : supported
Flasher
Changed: UltraFlash engine updated
! Tuned up for multi-failed regions ( like Huawei )
Changed: Default FlashSettings updated
Firmware Reader
Changed: Huawei support activated!
! Allow read CORRECT firmware but not a useless/harmful dump etc.
! Sparsing for Huawei-specific partitions activated - extremely reduce FW size
Changed: New types supported
Changed: Internal Database updated
Changed: Activated sparsing (reduce firmware size and increase flashing speed) for:
! - F2FS
! - HuaweiFS
Changed: MT6873 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Changed: MT6885 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Service
Changed: META protocol updated
! Support MT68xx line
! Legacy bugfixes
Changed: HWReport improved (MT68xx line support)
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode activated for SAMSUNG phones
! Device brands, supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Other
Changed: Many different general changes and fixes applied
https://infinity-box.com/support/?r=100153
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (Raphael/Legacy)
NewSoC : MT6873 support activated
NewSoC : MT6885 support activated (under test)
Changed: BootHelper : core updated
Changed: FireFly : EMI updated
Changed: MT817x line support improved
Changed: Boot : HWinfo parsing improved
Changed : UniversalBoot : EMI Engine
! Selection rules updated
! By default during Flashing used FW as source
! EMI collecting speed optimized, now more faster on auth-enabled devices
! BootHelper <> FireFly interaction optimized
NewSoC : MT6873 supported features
! Standalone SLA : supported
! FireFly : EMI : supported
! META operations : supported
! Firmware Read : supported
! Firmware Write : supported
! Reset Settings : supported
! Reset FRP : supported
! Misc Operations : supported
Flasher
Changed: UltraFlash engine updated
! Tuned up for multi-failed regions ( like Huawei )
Changed: Default FlashSettings updated
Firmware Reader
Changed: Huawei support activated!
! Allow read CORRECT firmware but not a useless/harmful dump etc.
! Sparsing for Huawei-specific partitions activated - extremely reduce FW size
Changed: New types supported
Changed: Internal Database updated
Changed: Activated sparsing (reduce firmware size and increase flashing speed) for:
! - F2FS
! - HuaweiFS
Changed: MT6873 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Changed: MT6885 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Service
Changed: META protocol updated
! Support MT68xx line
! Legacy bugfixes
Changed: HWReport improved (MT68xx line support)
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode activated for SAMSUNG phones
! Device brands, supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Other
Changed: Many different general changes and fixes applied
https://infinity-box.com/support/?r=100153
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.13 - Boot RSA Auth activated
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated
Changed: Automatic detection and use loaders with PMTInfo
Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific )
- Allow service over FlashMode models, which require remote authentification
- Supproted Brand lines: Itel - all RSA-auth enabled models
- Supported default prod auth - Generic models, RSA and AES
- After sucessfull auth you have full access to any service operations - flash read, write, frp, repair
- Feature require Internet access and valid IOS username and password
- Feature is free and unlimited for all currently supported models
Flasher
Changed: Protocol updated
Firmware reader
Changed: New range of generic and brand-specific models support for safe and complete Firmware Read
Changed: NAND support revised
Model DB
Changed: Moto G20 (XT-2821-X line) included in list (support under test)
Other
Changed: Some changes and fixes
https://infinity-box.com/support/?r=100154
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated
Changed: Automatic detection and use loaders with PMTInfo
Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific )
- Allow service over FlashMode models, which require remote authentification
- Supproted Brand lines: Itel - all RSA-auth enabled models
- Supported default prod auth - Generic models, RSA and AES
- After sucessfull auth you have full access to any service operations - flash read, write, frp, repair
- Feature require Internet access and valid IOS username and password
- Feature is free and unlimited for all currently supported models
Flasher
Changed: Protocol updated
Firmware reader
Changed: New range of generic and brand-specific models support for safe and complete Firmware Read
Changed: NAND support revised
Model DB
Changed: Moto G20 (XT-2821-X line) included in list (support under test)
Other
Changed: Some changes and fixes
https://infinity-box.com/support/?r=100154
-
- Posts: 4183
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity DongleManager v1.83 released
- Important internal changes
- Report & Fix option released
- GUI changes
- Important internal changes
- Report & Fix option released
- GUI changes