Software Updates and News
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.24 - UniversalBoot and other features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved
NewFeature UniversalBoot: EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )
NewFeature UniversalBoot: AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!
!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required
Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated
MemoryTool
Changed: "Init GPT/PMT with resize" feature improved
Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Other
Changed: Some general changes and fixes
https://infinity-box.com/news/?r=4137
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved
NewFeature UniversalBoot: EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )
NewFeature UniversalBoot: AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!
!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required
Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated
MemoryTool
Changed: "Init GPT/PMT with resize" feature improved
Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Other
Changed: Some general changes and fixes
https://infinity-box.com/news/?r=4137
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.12 - New repair level activated
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated (R25)
Changed: New DL-core support (v10 at Infinity notation)
NewSOC: SC9820e [RS/0S] with NAND supported
Changed: Diag protocol updated
Flasher
Changed: Protocol updated
Changed: FlashCore rebuild
- Reworked FlashErase
- Reworked support of fully erased or semi-damaged modern devices Android 8/9/10/11 (SC9820e, SC7731e, SC9832e, SC9863, SC9850), it is possible to repair these devices from any state (in case of working HW)
- Reworked NVRecovery procedure
- Android version change ( Downgrade/Upgrade ) now work more correct
Firmware reader
Changed: Android 10 specific changes
Changed: KaiOs specific changes
Changed: Initial Android 11 support
Changed: UltraRead protocol updated
Changed: Fixed "Encryption Unsucessfull" errors on some devices after flash
SPUnlock
Changed: Android 11 SPunlock and Repair confirmed and working
Changed: UniSoc Tiger T310 initial SPUnlock/Repair support
Changed: Changed unlock procedure for some devices
Changed: Allow check status/continue unlock on zero balance
Almost all existing on market devices for SP-Unlock and Repair are supported, Android 10 / 11 "security" as well
Model DB
Changed: New generic loaders included for 9820E with NAND
Other
Changed: Many other different changes and fixes
https://infinity-box.com/news/?r=4145
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated (R25)
Changed: New DL-core support (v10 at Infinity notation)
NewSOC: SC9820e [RS/0S] with NAND supported
Changed: Diag protocol updated
Flasher
Changed: Protocol updated
Changed: FlashCore rebuild
- Reworked FlashErase
- Reworked support of fully erased or semi-damaged modern devices Android 8/9/10/11 (SC9820e, SC7731e, SC9832e, SC9863, SC9850), it is possible to repair these devices from any state (in case of working HW)
- Reworked NVRecovery procedure
- Android version change ( Downgrade/Upgrade ) now work more correct
Firmware reader
Changed: Android 10 specific changes
Changed: KaiOs specific changes
Changed: Initial Android 11 support
Changed: UltraRead protocol updated
Changed: Fixed "Encryption Unsucessfull" errors on some devices after flash
SPUnlock
Changed: Android 11 SPunlock and Repair confirmed and working
Changed: UniSoc Tiger T310 initial SPUnlock/Repair support
Changed: Changed unlock procedure for some devices
Changed: Allow check status/continue unlock on zero balance
Almost all existing on market devices for SP-Unlock and Repair are supported, Android 10 / 11 "security" as well
Model DB
Changed: New generic loaders included for 9820E with NAND
Other
Changed: Many other different changes and fixes
https://infinity-box.com/news/?r=4145
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.25 - MT68xx line, new models and features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (Raphael/Legacy)
NewSoC : MT6873 support activated
NewSoC : MT6885 support activated (under test)
Changed: BootHelper : core updated
Changed: FireFly : EMI updated
Changed: MT817x line support improved
Changed: Boot : HWinfo parsing improved
Changed : UniversalBoot : EMI Engine
! Selection rules updated
! By default during Flashing used FW as source
! EMI collecting speed optimized, now more faster on auth-enabled devices
! BootHelper <> FireFly interaction optimized
NewSoC : MT6873 supported features
! Standalone SLA : supported
! FireFly : EMI : supported
! META operations : supported
! Firmware Read : supported
! Firmware Write : supported
! Reset Settings : supported
! Reset FRP : supported
! Misc Operations : supported
Flasher
Changed: UltraFlash engine updated
! Tuned up for multi-failed regions ( like Huawei )
Changed: Default FlashSettings updated
Firmware Reader
Changed: Huawei support activated!
! Allow read CORRECT firmware but not a useless/harmful dump etc.
! Sparsing for Huawei-specific partitions activated - extremely reduce FW size
Changed: New types supported
Changed: Internal Database updated
Changed: Activated sparsing (reduce firmware size and increase flashing speed) for:
! - F2FS
! - HuaweiFS
Changed: MT6873 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Changed: MT6885 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Service
Changed: META protocol updated
! Support MT68xx line
! Legacy bugfixes
Changed: HWReport improved (MT68xx line support)
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode activated for SAMSUNG phones
! Device brands, supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Other
Changed: Many different general changes and fixes applied
https://infinity-box.com/support/?r=100153
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (Raphael/Legacy)
NewSoC : MT6873 support activated
NewSoC : MT6885 support activated (under test)
Changed: BootHelper : core updated
Changed: FireFly : EMI updated
Changed: MT817x line support improved
Changed: Boot : HWinfo parsing improved
Changed : UniversalBoot : EMI Engine
! Selection rules updated
! By default during Flashing used FW as source
! EMI collecting speed optimized, now more faster on auth-enabled devices
! BootHelper <> FireFly interaction optimized
NewSoC : MT6873 supported features
! Standalone SLA : supported
! FireFly : EMI : supported
! META operations : supported
! Firmware Read : supported
! Firmware Write : supported
! Reset Settings : supported
! Reset FRP : supported
! Misc Operations : supported
Flasher
Changed: UltraFlash engine updated
! Tuned up for multi-failed regions ( like Huawei )
Changed: Default FlashSettings updated
Firmware Reader
Changed: Huawei support activated!
! Allow read CORRECT firmware but not a useless/harmful dump etc.
! Sparsing for Huawei-specific partitions activated - extremely reduce FW size
Changed: New types supported
Changed: Internal Database updated
Changed: Activated sparsing (reduce firmware size and increase flashing speed) for:
! - F2FS
! - HuaweiFS
Changed: MT6873 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Changed: MT6885 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Service
Changed: META protocol updated
! Support MT68xx line
! Legacy bugfixes
Changed: HWReport improved (MT68xx line support)
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode activated for SAMSUNG phones
! Device brands, supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Other
Changed: Many different general changes and fixes applied
https://infinity-box.com/support/?r=100153
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.13 - Boot RSA Auth activated
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated
Changed: Automatic detection and use loaders with PMTInfo
Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific )
- Allow service over FlashMode models, which require remote authentification
- Supproted Brand lines: Itel - all RSA-auth enabled models
- Supported default prod auth - Generic models, RSA and AES
- After sucessfull auth you have full access to any service operations - flash read, write, frp, repair
- Feature require Internet access and valid IOS username and password
- Feature is free and unlimited for all currently supported models
Flasher
Changed: Protocol updated
Firmware reader
Changed: New range of generic and brand-specific models support for safe and complete Firmware Read
Changed: NAND support revised
Model DB
Changed: Moto G20 (XT-2821-X line) included in list (support under test)
Other
Changed: Some changes and fixes
https://infinity-box.com/support/?r=100154
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated
Changed: Automatic detection and use loaders with PMTInfo
Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific )
- Allow service over FlashMode models, which require remote authentification
- Supproted Brand lines: Itel - all RSA-auth enabled models
- Supported default prod auth - Generic models, RSA and AES
- After sucessfull auth you have full access to any service operations - flash read, write, frp, repair
- Feature require Internet access and valid IOS username and password
- Feature is free and unlimited for all currently supported models
Flasher
Changed: Protocol updated
Firmware reader
Changed: New range of generic and brand-specific models support for safe and complete Firmware Read
Changed: NAND support revised
Model DB
Changed: Moto G20 (XT-2821-X line) included in list (support under test)
Other
Changed: Some changes and fixes
https://infinity-box.com/support/?r=100154
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity DongleManager v1.83 released
- Important internal changes
- Report & Fix option released
- GUI changes
- Important internal changes
- Report & Fix option released
- GUI changes
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.26 - New Core, BootLoader Unlock and more
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (Raphael / Legacy)
Changed: MT6785 support fixed
Changed: MT6885 support fixed
Core: Protocol: FireFly activated
FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features
Current Supported SoC (initial release):
MT6765
Support operations:
Identify: Device Info (Android), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other modes are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features
! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues)
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
! Bootloader unlock also allow unlock Brand-Specific cases (Xiaomi supported at the moment)
Changed : UniversalBoot : BootHelper
! Software always try to init BootRom mode if it's required for selected target
! Software allow force BootRom mode for generic models (plain one) if it's required
! In current release 4 different ways activated which cover most of cases but may not work with some cases, more to come
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: Huawei line changes and fixes
Service
Changed: HWReport improved
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode improved for Samsung devices (A4x and others)
! Device brands supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Changed: Identify operation now save preloader backup
Changed: Identify opertaion now show OTP info for Alcatel-like and similar devices
NewFeature : BootLoader Unlock Activated ( No data Loss )
Changed: Full MemoryInfo (include CSD, WP status, EOL info etc.) now shown in FireFly mode by default
Memorytool
Changed: Preloader Init has been rebuild - Raphael, Legacy, FireFly
Changed: Automatic selection rules updated
Changed: Extra operations updated
Changed: FileSystem build revised
Changed: FireFly as core protocol supported in MemoryTool
Other
Changed: Many different general changes and fixes applied
Changed: Protocol/SoC Generation switch can be done over "Platform" in System Menu
! According to Platform/Protocol selection some features may enabled or disabled - make right Platform selection before operation!
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (Raphael / Legacy)
Changed: MT6785 support fixed
Changed: MT6885 support fixed
Core: Protocol: FireFly activated
FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features
Current Supported SoC (initial release):
MT6765
Support operations:
Identify: Device Info (Android), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other modes are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features
! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues)
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
! Bootloader unlock also allow unlock Brand-Specific cases (Xiaomi supported at the moment)
Changed : UniversalBoot : BootHelper
! Software always try to init BootRom mode if it's required for selected target
! Software allow force BootRom mode for generic models (plain one) if it's required
! In current release 4 different ways activated which cover most of cases but may not work with some cases, more to come
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: Huawei line changes and fixes
Service
Changed: HWReport improved
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode improved for Samsung devices (A4x and others)
! Device brands supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Changed: Identify operation now save preloader backup
Changed: Identify opertaion now show OTP info for Alcatel-like and similar devices
NewFeature : BootLoader Unlock Activated ( No data Loss )
Changed: Full MemoryInfo (include CSD, WP status, EOL info etc.) now shown in FireFly mode by default
Memorytool
Changed: Preloader Init has been rebuild - Raphael, Legacy, FireFly
Changed: Automatic selection rules updated
Changed: Extra operations updated
Changed: FileSystem build revised
Changed: FireFly as core protocol supported in MemoryTool
Other
Changed: Many different general changes and fixes applied
Changed: Protocol/SoC Generation switch can be done over "Platform" in System Menu
! According to Platform/Protocol selection some features may enabled or disabled - make right Platform selection before operation!
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity DongleManager v1.86 released
- Report & Fix procedure improved
- Report & Fix suggested according to Smart-Card state
- Report & Fix procedure improved
- Report & Fix suggested according to Smart-Card state
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 MTK/MediaTek v2.27 - MT6853, MT6853, Samsung, FireFly and more
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael )
NewSOC : MT6833 support activated ( any security state )
NewSOC : MT6853 support activated ( any security state )
Changed: MT68xx line support optimized ( FireFly:EMI, EMI Engine, UltraFlash )
Auth
AUTH: MT6833 with any security configuration supported standalone!
AUTH: MT6853 with any security configuration supported standalone!
Core: Protocol: FireFly updated
FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features
New SoC activated:
MT6768
MT6771
Current Supported SoC:
MT6765 ( any security configuration )
MT6768 ( any security configuration )
MT6771 ( any security configuration )
Support operations:
Identify: Device Info (Android), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other modes are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features
! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues)
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
Changed : BootLoader unlock : ability to re-lock bootloader - software will ask if device already unlocked for re-lock it back
Flasher
Changed: UltraFlash engine updated
Changed: Samsung flashing support activated ( MTK models , only CM2 firmware! )
Changed: MT68xx line specific changes
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: SAMSUNG devices line support activated!
! Allow read COMPLETE, SAFE, USABLE firmware. No any security damage, no any additional reflashing after required
Changed: MT68xx line specific changes
Changed: Android 9-10-11 DevInfo optimized
Changed: Firmware naming optimized
Changed: Vendor Specific : OPPO devices support optimized for read firmware
Changed: Vendor Specific : VIVO devices support optimized for read firmware
Service
Changed: "SmartReset" updated
Changed: "SmartReset" now activated for LEGACY line devices
! Device range : From MT6572 and up to 6737
! Tested SoC/Devices : MT6572, MT6592, MT6595, MT6735, MT6737, MT6752, MT6753, MT8127, MT8172, MT6580
! Tested Android version : 4.4, 5.x, 6.x, 7.x, 8.x, 9.x, 10.x
! Info : Due to wide range of LEGACY devices some of them may work not correct so, please, leave us reports about issues!
Changed: Identify operation now read more device info ( Android 10/11 )
MemoryTool
Changed: Init GPT updated ( Normal / Resize mode )
Changed: Extra operations updated
Changed: Operations in FireFly mode updated
Other
Changed: Many different internal changes and fixes applied
https://infinity-box.com/news/?r=4168
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael )
NewSOC : MT6833 support activated ( any security state )
NewSOC : MT6853 support activated ( any security state )
Changed: MT68xx line support optimized ( FireFly:EMI, EMI Engine, UltraFlash )
Auth
AUTH: MT6833 with any security configuration supported standalone!
AUTH: MT6853 with any security configuration supported standalone!
Core: Protocol: FireFly updated
FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features
New SoC activated:
MT6768
MT6771
Current Supported SoC:
MT6765 ( any security configuration )
MT6768 ( any security configuration )
MT6771 ( any security configuration )
Support operations:
Identify: Device Info (Android), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other modes are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features
! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues)
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
Changed : BootLoader unlock : ability to re-lock bootloader - software will ask if device already unlocked for re-lock it back
Flasher
Changed: UltraFlash engine updated
Changed: Samsung flashing support activated ( MTK models , only CM2 firmware! )
Changed: MT68xx line specific changes
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: SAMSUNG devices line support activated!
! Allow read COMPLETE, SAFE, USABLE firmware. No any security damage, no any additional reflashing after required
Changed: MT68xx line specific changes
Changed: Android 9-10-11 DevInfo optimized
Changed: Firmware naming optimized
Changed: Vendor Specific : OPPO devices support optimized for read firmware
Changed: Vendor Specific : VIVO devices support optimized for read firmware
Service
Changed: "SmartReset" updated
Changed: "SmartReset" now activated for LEGACY line devices
! Device range : From MT6572 and up to 6737
! Tested SoC/Devices : MT6572, MT6592, MT6595, MT6735, MT6737, MT6752, MT6753, MT8127, MT8172, MT6580
! Tested Android version : 4.4, 5.x, 6.x, 7.x, 8.x, 9.x, 10.x
! Info : Due to wide range of LEGACY devices some of them may work not correct so, please, leave us reports about issues!
Changed: Identify operation now read more device info ( Android 10/11 )
MemoryTool
Changed: Init GPT updated ( Normal / Resize mode )
Changed: Extra operations updated
Changed: Operations in FireFly mode updated
Other
Changed: Many different internal changes and fixes applied
https://infinity-box.com/news/?r=4168
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Pinout database v2.02 released
Information about boot keys, pinouts, test-points, hardware updated
NOTE: pinout v2.02 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted
https://infinity-box.com/news/?r=4178
Information about boot keys, pinouts, test-points, hardware updated
NOTE: pinout v2.02 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted
https://infinity-box.com/news/?r=4178
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 CM2MT2 v2.28 - MT6877, MT6893, Repair Security and more
As ordinary, unique functions and methods released
Core
Changed: Protocol updated for Raphael / Legacy platforms
NewSOC: MT6877 supported - any security state - SLA, DAA, Plain
NewSOC: MT6893 supported - any security state - SLA, DAA, Plain
Changed: FireFly / Infinity DA (Download Agents) updated
Changed: NVRAM manager has been rebuild from scratch
For now it covers all Old and Modern devices for Identify and Repair operations in FlashMode!
FireFly - Universal DA (Download Agent) that was created by Infinity Team to reach new service level and gives features
FireFly: NewSOC: MT6739
FireFly: NewSOC: MT6761
FireFly: NewSOC: MT6763
FireFly: New operations supported:
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup
Current list of supported SoC:
MT6739
MT6761
MT6763
MT6765
MT6768
MT6771
Supported operations:
Identify: Device Info ( Android ), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other mode are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup
Flasher
Changed: UltraFlash engine updated and also any limitations has been removed
Changed: Flash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: MT6877 support
Changed: MT6893 support
Changed: Fake "Samsung" devices processing fixed
Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more security info
Changed: "Identify" operation now show modem info/version
Changed: New NVRAM engine/tools
! Read device security now works with Legacy (Old/New) and Raphael (Old/New) lines
! Rebuild check/verify procedures for modern devices
! Repair Security now works in flash mode for Raphael line too ( support most UNSIGNED types - Generic, Huawei, Vivo, Nokia etc. )
! Repair security NOT work with vendor-signed devices ( you will get info about device not supported during operation )
! Signed/Generic mode detection improved
Changed: Restore Backup operation has been updated
Changed: NVRAM read and write operations has been updated
Memorytool
Changed: FireFly mode support updated
Other
Changed: Many different general changes and fixes applied
Feature: Feedback - BugReporting/DebugData collection module enabled. Feedback can be enabled/disabled during installation.
! Feedback feature made for fast, automatic reporting to team about new/unsupported devices in different operations without any additional need of actions from user side.
! That will allow bring server-side updates faster and make updates for new and unsupported phones, if need, every day!
https://infinity-box.com/news/?r=4179
As ordinary, unique functions and methods released
Core
Changed: Protocol updated for Raphael / Legacy platforms
NewSOC: MT6877 supported - any security state - SLA, DAA, Plain
NewSOC: MT6893 supported - any security state - SLA, DAA, Plain
Changed: FireFly / Infinity DA (Download Agents) updated
Changed: NVRAM manager has been rebuild from scratch
For now it covers all Old and Modern devices for Identify and Repair operations in FlashMode!
FireFly - Universal DA (Download Agent) that was created by Infinity Team to reach new service level and gives features
FireFly: NewSOC: MT6739
FireFly: NewSOC: MT6761
FireFly: NewSOC: MT6763
FireFly: New operations supported:
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup
Current list of supported SoC:
MT6739
MT6761
MT6763
MT6765
MT6768
MT6771
Supported operations:
Identify: Device Info ( Android ), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other mode are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup
Flasher
Changed: UltraFlash engine updated and also any limitations has been removed
Changed: Flash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: MT6877 support
Changed: MT6893 support
Changed: Fake "Samsung" devices processing fixed
Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more security info
Changed: "Identify" operation now show modem info/version
Changed: New NVRAM engine/tools
! Read device security now works with Legacy (Old/New) and Raphael (Old/New) lines
! Rebuild check/verify procedures for modern devices
! Repair Security now works in flash mode for Raphael line too ( support most UNSIGNED types - Generic, Huawei, Vivo, Nokia etc. )
! Repair security NOT work with vendor-signed devices ( you will get info about device not supported during operation )
! Signed/Generic mode detection improved
Changed: Restore Backup operation has been updated
Changed: NVRAM read and write operations has been updated
Memorytool
Changed: FireFly mode support updated
Other
Changed: Many different general changes and fixes applied
Feature: Feedback - BugReporting/DebugData collection module enabled. Feedback can be enabled/disabled during installation.
! Feedback feature made for fast, automatic reporting to team about new/unsupported devices in different operations without any additional need of actions from user side.
! That will allow bring server-side updates faster and make updates for new and unsupported phones, if need, every day!
https://infinity-box.com/news/?r=4179
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.14 - A/B support and more
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated - R25.x
Changed: New DL-core support - v20 at Infinity notation
Changed: Diag protocol updated
Changed: 1S base loaders for SC7731e - AB devices, Android 10/11
Changed: 1S loaders line included for SC9832e - AB devices, Android 10/11
Changed: 1S loaders line included for SC9863 - AB devices, Android 10/11
Info: It's recommended to use 1S loaders for Identify operation on older UniSoc lines - SC7731e, SC9832e, SC9863 with Android 9 - 10
Changed: FlashLoader authentification [RSA and AES] - brand-specific operation
- Allow service over FlashMode models, which require remote authentification
- New model lines activated (server-side): Tecno, Infinix
- Supproted Brand lines: Itel, Infinix, Tecno, Generic
Flasher
Changed: Protocol updated
Changed: FlashCore update
Changed: A/B flashing activated (Infinity Packages, factory PAC)
Changed: PAC r2.x line support updated
Changed: Infinity Packages flashing revised
Service
Changed: FormatFS updated
Changed: NVMManager updated - NV Read, Write, Update
Changed: RepairSecurity updated: SN repair
Changed: RepairSecurity updated: ServerSupport models list increased, more Android 10/11 supported
Firmware reader
Changed: Android 10, 11 specific changes
Changed: UltraRead protocol updated
Changed: Loader compatibility selection optimized
Changed: A/B devices support activated!
- Allow read complete, working, safe and factory-like firmware images for most modern Android 10/11 devices!
- No any FOTA, security and other issues with read FW, no any unique data damage
- Automatic active slot identification and selection, with no chances to read useless firmware and also save 2x HDD space for old AB
Model DB
Changed: New generic loaders included for SC7731e - 1S line, v20
Changed: New generic loaders included for SC9832e - 1S line, v20
Changed: New generic loaders included for SC9863 0 1S line, v20
Changed: New generic loaders included for T618 - 1S line, v20
Changed: New loaders included for Realme
Changed: New loaders included for Itel
Changed: New loaders included for Tecno
Changed: New loaders included for ZTE
Other
Changed: LoaderDB updater now supports modern PACs - A/B, modern R2.x
Changed: Many other different changes and fixes
https://infinity-box.com/news/?r=4189
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated - R25.x
Changed: New DL-core support - v20 at Infinity notation
Changed: Diag protocol updated
Changed: 1S base loaders for SC7731e - AB devices, Android 10/11
Changed: 1S loaders line included for SC9832e - AB devices, Android 10/11
Changed: 1S loaders line included for SC9863 - AB devices, Android 10/11
Info: It's recommended to use 1S loaders for Identify operation on older UniSoc lines - SC7731e, SC9832e, SC9863 with Android 9 - 10
Changed: FlashLoader authentification [RSA and AES] - brand-specific operation
- Allow service over FlashMode models, which require remote authentification
- New model lines activated (server-side): Tecno, Infinix
- Supproted Brand lines: Itel, Infinix, Tecno, Generic
Flasher
Changed: Protocol updated
Changed: FlashCore update
Changed: A/B flashing activated (Infinity Packages, factory PAC)
Changed: PAC r2.x line support updated
Changed: Infinity Packages flashing revised
Service
Changed: FormatFS updated
Changed: NVMManager updated - NV Read, Write, Update
Changed: RepairSecurity updated: SN repair
Changed: RepairSecurity updated: ServerSupport models list increased, more Android 10/11 supported
Firmware reader
Changed: Android 10, 11 specific changes
Changed: UltraRead protocol updated
Changed: Loader compatibility selection optimized
Changed: A/B devices support activated!
- Allow read complete, working, safe and factory-like firmware images for most modern Android 10/11 devices!
- No any FOTA, security and other issues with read FW, no any unique data damage
- Automatic active slot identification and selection, with no chances to read useless firmware and also save 2x HDD space for old AB
Model DB
Changed: New generic loaders included for SC7731e - 1S line, v20
Changed: New generic loaders included for SC9832e - 1S line, v20
Changed: New generic loaders included for SC9863 0 1S line, v20
Changed: New generic loaders included for T618 - 1S line, v20
Changed: New loaders included for Realme
Changed: New loaders included for Itel
Changed: New loaders included for Tecno
Changed: New loaders included for ZTE
Other
Changed: LoaderDB updater now supports modern PACs - A/B, modern R2.x
Changed: Many other different changes and fixes
https://infinity-box.com/news/?r=4189
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 CM2MT2 v2.29 - MT6781, A/B Reader and more
Core
NewSOC : MT6781 supported - any security state - SLA, DAA, Plain
Changed: Protocol updated for Raphael / Legacy platforms
Changed: FireFly / Infinity DA (Download Agents) updated
Agent : DA v2136 skipped, unstable
FireFly
FireFly: NewSOC: MT6735 [Legacy]
FireFly: NewSOC: MT6737 [Legacy]
Current list of supported SoC:
Legacy : MT6737, MT6735
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! In most cases on LEGACY devices UserData encryption can be not set.
!! FireFly allow boot/read even devices with dead DRAM. No need to desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Changed: Flash engine updated
Firmware Reader
Changed: A/B devices support activated!
! Android 10/11/12 with A/B slots processing is now supported
! Read FW is completely like factory one!
! Read FW is NOT damage anything on device! ( FOTA, A/B switch and other )
! Read FW is NOT read "broken" slots = no any further issues!
! Read FW identify active/alive slots = always WORKING firmware, extremely reduse FW size ( for ABv1 )
Changed: Database rebuild. Branded : Support most of modern LG, Oppo, Samsung, Vivo, Infinix, Tecno and other brands.
! All this is completely safe and factory-like firmwares!
Changed: Database rebuild. Unbranded : Many "noname" and small brands supported now as well.
! All this is completely safe and factory-like firmwares!
Changed: New types supported
Changed: Internal Database updated
Changed: MT6781 support
Service
Changed: "SmartReset" updated for Android 10/11 devices.
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more device info
Changed: Restore Backup operation has been updated
Changed: SPUnlock updated. Unsupported types reporting activated if user enable that option
Other
[+] About 200 different general changes and fixes applied to algorithms and methods
[+] Software Update checker feature enabled
https://infinity-box.com/news/?r=4197
Core
NewSOC : MT6781 supported - any security state - SLA, DAA, Plain
Changed: Protocol updated for Raphael / Legacy platforms
Changed: FireFly / Infinity DA (Download Agents) updated
Agent : DA v2136 skipped, unstable
FireFly
FireFly: NewSOC: MT6735 [Legacy]
FireFly: NewSOC: MT6737 [Legacy]
Current list of supported SoC:
Legacy : MT6737, MT6735
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! In most cases on LEGACY devices UserData encryption can be not set.
!! FireFly allow boot/read even devices with dead DRAM. No need to desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Changed: Flash engine updated
Firmware Reader
Changed: A/B devices support activated!
! Android 10/11/12 with A/B slots processing is now supported
! Read FW is completely like factory one!
! Read FW is NOT damage anything on device! ( FOTA, A/B switch and other )
! Read FW is NOT read "broken" slots = no any further issues!
! Read FW identify active/alive slots = always WORKING firmware, extremely reduse FW size ( for ABv1 )
Changed: Database rebuild. Branded : Support most of modern LG, Oppo, Samsung, Vivo, Infinix, Tecno and other brands.
! All this is completely safe and factory-like firmwares!
Changed: Database rebuild. Unbranded : Many "noname" and small brands supported now as well.
! All this is completely safe and factory-like firmwares!
Changed: New types supported
Changed: Internal Database updated
Changed: MT6781 support
Service
Changed: "SmartReset" updated for Android 10/11 devices.
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more device info
Changed: Restore Backup operation has been updated
Changed: SPUnlock updated. Unsupported types reporting activated if user enable that option
Other
[+] About 200 different general changes and fixes applied to algorithms and methods
[+] Software Update checker feature enabled
https://infinity-box.com/news/?r=4197
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 CM2MT2 v2.30 - More models & Features
Core
Changed: Protocol updated for Raphael / Legacy platforms
Changed: FireFly / Infinity DA (Download Agents) updated
FireFly
FireFly: NewSOC: MT6580 [Legacy]
Current list of supported SoC:
Legacy : MT6580, MT6735, MT6737
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! On LEGACY devices in most cases UserData encryption can be not set
!! FireFly allow boot/read devices even with dead DRAM - no need to desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
MemoryTool
Changed: UltraFlash activated by default, no more any write restrictions
Changed: Read/Write/Erase operations revised
Service
Changed: "SmartReset" updated for Legacy and old Raphael lines
Changed: "SmartReset Extra" updated
Changed: "SmartReset Data Safe" option activated
Remove all APP and Security settings, retain userdata for Vivo, Oppo.
It works for limited number of models at the moment, it depend on android version/build, use at own risk!
Brand/model selection is not required, autodetection works
Other
Changed: Many different general changes and fixes applied
https://infinity-box.com/news/?r=4198
Core
Changed: Protocol updated for Raphael / Legacy platforms
Changed: FireFly / Infinity DA (Download Agents) updated
FireFly
FireFly: NewSOC: MT6580 [Legacy]
Current list of supported SoC:
Legacy : MT6580, MT6735, MT6737
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! On LEGACY devices in most cases UserData encryption can be not set
!! FireFly allow boot/read devices even with dead DRAM - no need to desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
MemoryTool
Changed: UltraFlash activated by default, no more any write restrictions
Changed: Read/Write/Erase operations revised
Service
Changed: "SmartReset" updated for Legacy and old Raphael lines
Changed: "SmartReset Extra" updated
Changed: "SmartReset Data Safe" option activated
Remove all APP and Security settings, retain userdata for Vivo, Oppo.
It works for limited number of models at the moment, it depend on android version/build, use at own risk!
Brand/model selection is not required, autodetection works
Other
Changed: Many different general changes and fixes applied
https://infinity-box.com/news/?r=4198
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 CM2MT2 v2.31 - New features activated
Core
Changed: Activated FireFly over DA
! Support latest UFS-based SoC : MT6781, MT6785, MT6779, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893
! Support eMMC-based SoC : MT6739, MT6757, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6797, MT8167
! Supported operation : Generic MTK + Bootloader Unlock is available now for all latest SoC
FireFly
FireFly: NewSOC: MT6753 [Legacy]
FireFly: Bootloader Unlock activated for LEGACY phones
! Support for now: MT6580, MT6737 ( tested and confirmed as working )
Current list of supported SoC:
Legacy : MT6580, MT6735, MT6737, MT6753
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! On LEGACY devices in most cases UserData encryption can be not set.
!! FireFly allow boot/read even for devices with dead DRAM - no need desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: Vivo, Oppo, Realme - firmware naming optimized - model, type, internal versioning etc.
MemoryTool
Changed: MemoryTool rebuild
Changed: Activated "Make Backup" option
Changed: Activated "Restore Backup" option
Service
Changed: "SmartReset" rebuild
!Remove flyme account improved ( meizu )
!Reset FRP may fail on some devices, fixed
!Improved work in FireFly mode
!Improved compatibility with old Android(4 - 7) versions
Changed: Security info reading improved
Changed: Reset PrivacyLock activated under FireFly mode
Changed: Backup ext_csd data during Identify under FireFly mode
Changed: Bootloader Unlock rebuild (FireFly / Generic)
Changed: Bootloader Unlock activated for more SoC : MT6757, MT6781, MT6785, MT6779, MT6797, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893, MT8167
Changed: Bootloader Unlock activated for more SoC : MT6580, MT6737
Other
Changed: Many internal changes and bugfixes
https://infinity-box.com/news/?r=4201
Core
Changed: Activated FireFly over DA
! Support latest UFS-based SoC : MT6781, MT6785, MT6779, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893
! Support eMMC-based SoC : MT6739, MT6757, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6797, MT8167
! Supported operation : Generic MTK + Bootloader Unlock is available now for all latest SoC
FireFly
FireFly: NewSOC: MT6753 [Legacy]
FireFly: Bootloader Unlock activated for LEGACY phones
! Support for now: MT6580, MT6737 ( tested and confirmed as working )
Current list of supported SoC:
Legacy : MT6580, MT6735, MT6737, MT6753
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! On LEGACY devices in most cases UserData encryption can be not set.
!! FireFly allow boot/read even for devices with dead DRAM - no need desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: Vivo, Oppo, Realme - firmware naming optimized - model, type, internal versioning etc.
MemoryTool
Changed: MemoryTool rebuild
Changed: Activated "Make Backup" option
Changed: Activated "Restore Backup" option
Service
Changed: "SmartReset" rebuild
!Remove flyme account improved ( meizu )
!Reset FRP may fail on some devices, fixed
!Improved work in FireFly mode
!Improved compatibility with old Android(4 - 7) versions
Changed: Security info reading improved
Changed: Reset PrivacyLock activated under FireFly mode
Changed: Backup ext_csd data during Identify under FireFly mode
Changed: Bootloader Unlock rebuild (FireFly / Generic)
Changed: Bootloader Unlock activated for more SoC : MT6757, MT6781, MT6785, MT6779, MT6797, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893, MT8167
Changed: Bootloader Unlock activated for more SoC : MT6580, MT6737
Other
Changed: Many internal changes and bugfixes
https://infinity-box.com/news/?r=4201
-
- Posts: 4177
- Joined: 19 Oct 2011, 20:27
- Contact:
Re: Software Updates and News
Infinity Chinese Miracle-2 CM2MT2 v2.32 - RPMB, more Repair & Service features
As ordinary unique #CM2 functions and methods released
Core
Changed: FireFly loaders has been updated
Changed: FireFly DA loaders has been updated
Changed: RPMB operations activated - Read, Write, Erase
- Supported SoC: MT6739, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6781, MT6785, MT6799, MT6833, MT6853, MT6873, MT6877, MT6885, MT6893
- Fast: 1 | 2 minute for 16MB on eMMC and UFS on Read | Write & Erase
- Easy and Safe: automatic backup at service cases, data verification
MemoryTool
Changed: MemoryTool rebuild
Changed: Activated RPMB operations menu
- Allow Read RPMB memory
- Allow Write RPMB memory
- Allow Wipe RPMB memory
Service
Changed: "SmartReset" rebuild
- Smart Reset Extra updated: support Huawei Account reset: EMUI 9-10
- SmartReset in DataSafe mode check and warn about "fixed" devices, where data loss possible
Changed: Identify operation improved
Changed: Repair Security
- Repair security now support VIVO devices
- Repair case select automatic, not need select / choose / do anything extra.
New Feature: ServiceReport: Allow read device-specific data and send to R&D team directly: Menu -> Extra -> Make ServiceReport
This option helps to collect hardware database and improve device detection process.
Other
Changed: GUI changes : MemoryTool menu, Dialogs
Changed: Many importnatn internal changes, bugfixes and improvements
https://infinity-box.com/news/?r=4208
As ordinary unique #CM2 functions and methods released
Core
Changed: FireFly loaders has been updated
Changed: FireFly DA loaders has been updated
Changed: RPMB operations activated - Read, Write, Erase
- Supported SoC: MT6739, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6781, MT6785, MT6799, MT6833, MT6853, MT6873, MT6877, MT6885, MT6893
- Fast: 1 | 2 minute for 16MB on eMMC and UFS on Read | Write & Erase
- Easy and Safe: automatic backup at service cases, data verification
MemoryTool
Changed: MemoryTool rebuild
Changed: Activated RPMB operations menu
- Allow Read RPMB memory
- Allow Write RPMB memory
- Allow Wipe RPMB memory
Service
Changed: "SmartReset" rebuild
- Smart Reset Extra updated: support Huawei Account reset: EMUI 9-10
- SmartReset in DataSafe mode check and warn about "fixed" devices, where data loss possible
Changed: Identify operation improved
Changed: Repair Security
- Repair security now support VIVO devices
- Repair case select automatic, not need select / choose / do anything extra.
New Feature: ServiceReport: Allow read device-specific data and send to R&D team directly: Menu -> Extra -> Make ServiceReport
This option helps to collect hardware database and improve device detection process.
Other
Changed: GUI changes : MemoryTool menu, Dialogs
Changed: Many importnatn internal changes, bugfixes and improvements
https://infinity-box.com/news/?r=4208