MTK 6877 Supported with Infinity
Posted: 25 Aug 2021, 14:35
Model/Brand : Oppo Reno 6 CPH2251
Problem: Demo Phone (done by smart reset)
Thanks to Vikas for being helpfull
Problem: Demo Phone (done by smart reset)
Code: Select all
Operation : Identify [ v2.28 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM152)
MODE : BOOTROM
PORT : 152
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Montrose
TYPE : MODERN [RAPHAEL]
BROM : MEID : 34057760511C5BB53B0E2B1DCDC6A7A4
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 67947E6F7D176B75732EFBCCF39DD9A59F2CF1CCDFF78E3E10E1BB1905FABCC0
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6877
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_oplus6877.bin
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x200000000 [ 8.00 GB ]
UFS: AD014839485131354146414D42444152
UFS:
VEN : 0x01AD
VID : H9HQ15AFAMBDAR
IFW : A043
LU0 : 0x00400000 [ 4.00 MB ]
LU1 : 0x00400000 [ 4.00 MB ]
LU2 : 0x1DCB000000 [ 119.17 GB ]
FSN : 2018381191E0
REG : 0x101010000
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0002 , EVOL : 0x0000
RNID : 86B7CC24C33EA895755E052EBE4E5F49
DA : USB : HIGH-SPEED
Boot done!
Product Board : oplus6877
Board Platform : mt6877
Product Brand : alps
Product Device : oplus6877
Product Manfct : alps
Product Model : oplus6877
Product Name : vnd_oplus6877
NVRAM : OPLUS6877_20355_MDBIN_PCB01_MT6877_S00.MOLY_NR15_R3_TC16_PR4_SP_V1_P31
NVRAM : 0xA869C1B1
NVRAM : State : Ok!
INFO : WiFi MAC : A0941AFFA7A1
INFO : BlTh MAC : A0941AFFA7A0
Backup sensetive data [ 16 ]
Backup path : Backup\MT6877__34057760511C5BB53B0E2B1DCDC6A7A4\
[24] Read : NVRAM
[15] Read : NVDATA
[23] Read : PROINFO
[48] Read : LK
[14] Read : NVCFG
[18] Read : PROTECT1
[19] Read : PROTECT2
[1] Read : PGPT
[17] Read : PERSIST
[0] Read : PRELOADER
Backup done!
STORAGE : Life Status : UFS : OK!
STORAGE : OTP Status : UNLOCKED!
Done!
Elapsed: 00:00:31Code: Select all
Operation : Identify [ v2.28 ]
Mode : META
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM152)
MODE : BOOTROM
PORT : 152
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Montrose
TYPE : MODERN [RAPHAEL]
BROM : MEID : 34057760511C5BB53B0E2B1DCDC6A7A4
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 67947E6F7D176B75732EFBCCF39DD9A59F2CF1CCDFF78E3E10E1BB1905FABCC0
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : Configuring target for META
BROM : META configured!
INIT : META confirmed!
Boot done!
AP_CHIP : MT6877
AP_SWTM : Thu Jul 8 12:41:44 CST 2021
AP_SWVR : CPH2251export_11_A.10_2021070819030083
MD_CHIP : MT6877
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.NR15.R3.TC16.PR4.SP.V1.P31
MD_SWVR : OPPO_K6877V1_64_HW
MD_HWVR : Unknown
IMEI[1] :
IMEI[2] :
NVRAM saved as : MT6877_1.0_MOLY.NR15.R3.TC16.PR4.SP.V1.P31_OPPO_K6877V1_64_HW.bin
Done!
Elapsed: 00:01:06Code: Select all
Operation : Reset Settings/Format FS [ v2.28 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM152)
MODE : BOOTROM
PORT : 152
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Montrose
TYPE : MODERN [RAPHAEL]
BROM : MEID : 34057760511C5BB53B0E2B1DCDC6A7A4
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 67947E6F7D176B75732EFBCCF39DD9A59F2CF1CCDFF78E3E10E1BB1905FABCC0
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6877
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_oplus6877.bin
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x200000000 [ 8.00 GB ]
UFS: AD014839485131354146414D42444152
UFS:
VEN : 0x01AD
VID : H9HQ15AFAMBDAR
IFW : A043
LU0 : 0x00400000 [ 4.00 MB ]
LU1 : 0x00400000 [ 4.00 MB ]
LU2 : 0x1DCB000000 [ 119.17 GB ]
FSN : 2018381191E0
REG : 0x101010000
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0002 , EVOL : 0x0000
RNID : 86B7CC24C33EA895755E052EBE4E5F49
DA : USB : HIGH-SPEED
Boot done!
SmartInfo : 0x8F5654
Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Done!
Elapsed: 00:00:32
Reconnect Power/Cable!Code: Select all
Operation : HW Report [ v2.28 ]
HWreport : Mode : UFS
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM152)
MODE : BOOTROM
PORT : 152
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Montrose
TYPE : MODERN [RAPHAEL]
BROM : MEID : 34057760511C5BB53B0E2B1DCDC6A7A4
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 67947E6F7D176B75732EFBCCF39DD9A59F2CF1CCDFF78E3E10E1BB1905FABCC0
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6877
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_oplus6877.bin
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x200000000 [ 8.00 GB ]
UFS: AD014839485131354146414D42444152
UFS:
VEN : 0x01AD
VID : H9HQ15AFAMBDAR
IFW : A043
LU0 : 0x00400000 [ 4.00 MB ]
LU1 : 0x00400000 [ 4.00 MB ]
LU2 : 0x1DCB000000 [ 119.17 GB ]
FSN : 2018381191E0
REG : 0x101010000
CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0002 , EVOL : 0x0000
RNID : 86B7CC24C33EA895755E052EBE4E5F49
DA : USB : HIGH-SPEED
Boot done!
Memory Info :
CID : H9HQ15AFAMBDAR
EXT_CSD Info :
[UFS] Device Desc:
[UFS] life cycle check, pre_eol_info=1, life_time_est_a=1, life_time_est_b=1
[UFS] vendor id: 0x1ad
[UFS] ufs id: H9HQ15AFAMBDAR
[UFS] ufs fwver: A043
[UFS] ufs serial number: 2018381191E0
[UFS] dev_quirk = 0x10000000
[UFS] Custom force provison=0, TW size=-1GB, TW no red=1, HPB size=-1GB
[UFS] info: number of active LU: 3, check OK.
[UFS] info: number of Boot LU: 2, check OK.
[UFS] info: LU Configuration Check OK. Bootable UFS
[UFS] info: Boot LU Configuration Check OK. Active Boot LU: LU0
[UFS] Sense Data: ASC=29, ASCQ=2
[UFS] Sense Data: ASC=29, ASCQ=2
[UFS] Sense Data: ASC=29, ASCQ=2
[UFS] Sense Data: ASC=29, ASCQ=2
[UFS] info: RX HS-G3, setting is4
[UFS] info: TX HS-G3, setting is4
[UFS] info: HS-G3-2
Overall status :
MLC status : 0% - 10% used
SLC status : 0% - 10% used
EOL status : Normal ( Less than 80% reserved blocks used )
RPMB : RPMB KEY NOT set! [State : CLEAN : USABLE]
STORAGE : OTP Status : UNLOCKED!
Done!
Elapsed: 00:00:17Thanks to Vikas for being helpfull