Infinity Box Dongle [CM2] [BEST] Support

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 07822A82
ID_BLOCK_L : 07E19B63D25845403F14FCE12E75FDCD
ID_BLOCK_L : 59349A3526A911923786CB0002EDFBC0
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : OPPO
ProdName : msm8916_64
ProdModel : MSM8916 for arm64
Device : msm8916_64
AndroidVer: 7.1
SWVersion : A53m_11.A.05_005_201607060646
Manufact. : OPPO
SysPatch : LMY47V
DevComTime: 7/6/2016 12:54:03 AM
QLMxCPU : MSM8916

USERData : NORMAL
GCSec : NORMAL

Done!
Elapsed: 00:00:32

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 07822A82
ID_BLOCK_L : 07E19B63D25845403F14FCE12E75FDCD
ID_BLOCK_L : 59349A3526A911923786CB0002EDFBC0
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand : OPPO
ProdName : msm8916_64
ProdModel : MSM8916 for arm64
Device : msm8916_64
AndroidVer: 7.1
SWVersion : A53m_11.A.05_005_201607060646
Manufact. : OPPO
QLMxCPU : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v7.1__MSM8916_for_arm64_ _msm8916_64__msm8916_64__A53m_11.A.05_005_20160706 0646

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : pnvbak.img
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : driver.iso
[Read Ok] : reserve4.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : cdt.mbn
[Read Ok] : gpt_backup2.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 2383 MiB

Done!
Elapsed: 00:11:28

Reconnect Power/Cable!

i am trying to flash this mobile with A53M Msm Download tool

mobile keep rebooting on msm tool waiting to enter usb download

and when i am trying to reflash this phone with read back file

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 07822A82
ID_BLOCK_L : 07E19B63D25845403F14FCE12E75FDCD
ID_BLOCK_L : 59349A3526A911923786CB0002EDFBC0
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Flash Chain : 43
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sec.dat
Flashing : sbl1.mbn
Flashing : sbl1.mbn

CM2QLM interface (not responding for an hour or above)

Emmc test tool says phone is ok

kindly provode me its solution.