Infinity Box Dongle [CM2] [BEST] Support

Posted: **26 Jan 2021, 16:23**

Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 )
NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported
NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported

Flasher
Changed: Core updated for RAPHAEL line

Service
Changed: META core updated

Changed: HW Report ( RAPHAEL - only )
- LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck !
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init)
!* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !

Firmware Reader
Changed: Some modern brand-specific changes (Oppo, Realme)
Changed: New types supported
Changed: Internal Database updated

Model DB
Changed: New agents included for Tecno, Infinix ( with different SoC lines )
Changed: New DA base v2044 included

Other
Changed: GUI settings now stored and load select style, settings and other at next run
Changed: Environment compatibility issue with 32 bit OS has been fixed
Changed: Many different changes and fixes

https://www.infinity-box.com/news/?r=4075

Posted: **27 Jan 2021, 14:30**

Still not supported Chip MT6779V

Posted: **27 Jan 2021, 23:48**

000914A658 wrote: ↑27 Jan 2021, 14:30 Still not supported Chip MT6779V

Do not say if you have no proof !
Try and post software operation text

Posted: **28 Jan 2021, 08:32**

Support wrote: ↑27 Jan 2021, 23:48
000914A658 wrote: ↑27 Jan 2021, 14:30 Still not supported Chip MT6779V
Do not say if you have no proof !
Try and post software operation text

Card found : 0914A658 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.19

Load IDBase v125162 Ok!

Operation : Identify [ v2.19 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM103)
MODE : BOOTROM
PORT : 103
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 63E133296D7D61D14F4C5D061B3FD75F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 7CE7E1F066A28223695A496EE13F5BAB839DD7D47F5969898234CC8D5A54C417
BROM : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Posted: **28 Jan 2021, 10:56**

000914A658 wrote: ↑28 Jan 2021, 08:32
Support wrote: ↑27 Jan 2021, 23:48
000914A658 wrote: ↑27 Jan 2021, 14:30 Still not supported Chip MT6779V
Do not say if you have no proof !
Try and post software operation text
Card found : 0914A658 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.19

Load IDBase v125162 Ok!

Operation : Identify [ v2.19 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM103)
MODE : BOOTROM
PORT : 103
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 63E133296D7D61D14F4C5D061B3FD75F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 7CE7E1F066A28223695A496EE13F5BAB839DD7D47F5969898234CC8D5A54C417
BROM : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Make sSLA checked and try again

Posted: **28 Jan 2021, 18:40**

already i checked ssla i maked

Posted: **29 Jan 2021, 14:13**

000914A658 wrote: ↑28 Jan 2021, 18:40 already i checked ssla i maked

CHIP : MT6779
supported later

Infinity Box Dongle [CM2] [BEST] Support

Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

Re: Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

Re: Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

Re: Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

Re: Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

Re: Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features

Re: Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features