Page 1 of 1
.::CM2 SP2 SUCCESS REPORTs::.
Posted: 21 Sep 2019, 12:01
by gracy_elec
SUCCESSFULLY TEAR FRP(ITEL IT1508C AND:5.1 SC7731C)USB
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : LMY47D
Display ID : LMY47D release-keys
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2016-06-01
Build Time : 1467172764
Product Model : itel it1508
Product Brand : Itel
Product Name : itel_it1508C
Product Device : itel_it1508C
Product Manfct : itel
Board Platform : sc8830
Product Info : c160_tsl_111
UserData : STATE : ENCRYPTION
Done!
Elapsed: 00:00:37
Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Reset FRP
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:48
THANKS INFINITY-BOX TEAM
LAVA A97 2GB PLUS AND:7.0 SC9832A BRUSH HANG ON LOGO Done
Posted: 21 Sep 2019, 12:10
by gracy_elec
SUCCESSFULLY BRUSH HANG ON LOGO(LAVA A97 2GB PLUS AND:7.0 SC9832A)USB
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : LAVA : A97 2GB PLUS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : NRD90M
Display ID : LAVA_A97_2GB_PLUS_N_2_16_V4.0_M004_20170707_ENG_IN
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2017-05-05
Build Time : 1499423617
Product Model : A97 2GB PLUS
Product Brand : Lava
Product Name : A97_2GB_PLUS
Product Device : A97_2GB_PLUS
Product Board : A97_2GB_PLUS
Product Manfct : Lava
Board Platform : sc8830
Product Info : A97_2GB_PLUS
UserData : STATE : ENCRYPTION
Done!
Elapsed: 00:00:39
Operation : Flash Firmware [ v2.00r2 ]
Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : LAVA_A97_2GB_PLUS_N_2_16_V4.0_M008_20170829_ENG_IN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x28
PMTMng : Update PMT Ok!
NVRM : nvitem.bin
NVMng : Load 0x29
NVMng : Init SRC
NVMng : Security DAMAGED!
NVMng : Backup to local storage : Ok!
NVMng : Trying use recover mode
NVMng : Security DAMAGED!
NVMng : Backup to local storage : Ok!
NVMng : Trying use recover mode
NVMng : Init DST
NVMng : NV has been destroyed! Forced Update enabled! Repair security after!
NVMng : NVM block updated!
CODE : prodnv.img
ERASE : UBOOT
UBOOT : u-boot-spl-16k.bin
CODE : SC9600_sharkls_3593_CUST_Base_NV_MIPI.dat
CODE : LTE_DSP.bin
CODE : SHARKL_DM_DSP.bin
CODE : SC9600_sharkl_wphy_5mod_volte_zc.bin
CODE : PM_sharkls_arm7.bin
CODE : fdl1.bin(1)
CODE : EXEC_KERNEL_IMAGE0.bin
CODE : boot.img
CODE : tos.bin
CODE : vmm.bin
CODE : recovery.img
FSIMG : system.img
CODE : sysinfo.img
FSIMG : persist.img
FSIMG : userdata.img
CODE : LOGO.bmp
CODE : LOGO.bmp
FSIMG : cache.img
ERASE : L_RUNTIMENV1
ERASE : MISC
UBOOT : u-boot.bin
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:06:37
THANKS INFINITY-BOX TEAM
LYF F81E AND:6.0 SC8830 BRUSH HANG ON LOGO Done
Posted: 21 Sep 2019, 12:22
by gracy_elec
SUCCESSFULLY BRUSH HANG ON LOGO(LYF F81E AND:6.0 SC8830)USB
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F81E
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : LYF-F81E-000-02-08-040319
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2019-03-01
Build Time : 1551692936
Product Model : F81E
Product Brand : LYF
Product Name : F81E
Product Device : w203_kew_211
Product Board : w203_kew_211
Product Manfct : SPRD
Board Platform : sc8830
Product Info : w203_kew_211
UserData : STATE : ENCRYPTION
Done!
Elapsed: 00:02:04
Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Forced [ Format FS / Fix ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F81E
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : Forced Wipe
Wipe Ok : Forced Wipe
Reconnect Power/Cable!
Done!
Elapsed: 00:00:28
THANKS INFINITY-BOX TEAM
MICROMAX Q426 AND:5.1 SC9832A BRUSH HANG ON LOGO Done
Posted: 21 Sep 2019, 12:36
by gracy_elec
SUCCESSFULLY BRUSH HANG ON LOGO (MICROMAX Q426 AND:5.1 SC9832A)USB
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Micromax : Micromax Q426
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : LMY47D
Display ID : MMX_Q426_SW_V8.0.5_HW_V1.0.0_220916
Ver. CodeName : REL
Ver. Release : 5.1
Sec. Patch : 2016-02-01
Build Time : 1474536686
Product Model : Micromax Q426
Product Brand : Micromax
Product Name : Q426
Product Device : Q426
Product Board : zsl1805_mmx
Product Manfct : Micromax
Board Platform : sc8830
Product Info : Q426
UserData : STATE : ENCRYPTION
Done!
Elapsed: 00:02:56
Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Micromax : Micromax Q426
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:28
THANKS INFINITY-BOX TEAM
LYF F41T AND:6.0 SP9820A TEAR USER LOCK Done
Posted: 21 Sep 2019, 12:44
by gracy_elec
SUCCESSFULLY TEAR USER LOCK(LYF F41T AND:6.0 SP9820A)USB
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F41T
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : LYF-F41T-000-02-06-040319
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2019-03-01
Build Time : 1551673757
Product Model : F41T
Product Brand : LYF
Product Name : F41T
Product Device : sp9820a_5c20
Product Board : sp9820a_5c20
Product Manfct : Techain
Board Platform : sc8830
Product Info : sp9820a_5c20
UserData : STATE : ENCRYPTION
Done!
Elapsed: 00:00:38
Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F41T
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:36
THANKS INFINITY-BOX TEAM
LEPHONE W2 AND:6.0 SP9832A TEAR PATTERN & FRP Done
Posted: 21 Sep 2019, 12:50
by gracy_elec
SUCCESSFULLY TEAR PATTERN & FRP(LEPHONE W2 AND:6.0 SP9832A)USB
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : lephone : lephone_W2
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2018-08-05
Build Time : 1543402284
Product Board : sp9832a_3h10_volte
Board Platform : sc8830
Product Info : sp9832a_3h10_volte
Display ID : lephoneW2_India_V2.2
Product Model : lephone_W2
Product Model : lephone W2
Product Device : lephone_W2b
Product Name : lephone
Product Brand : lephone
Product Manfct : lephone
Product Model : DFSL_BLF_PW2HB_OE
UserData : STATE : ENCRYPTION
Done!
Elapsed: 00:00:41
Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : lephone : lephone_W2
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:35
THANKS INFINITY-BOX TEAM
LYF F271I AND:6.0 SP9820E TEAR USER LOCK Done
Posted: 21 Sep 2019, 12:56
by gracy_elec
SUCCESSFULLY TEAR USER LOCK(LYF F271I AND:6.0 SP9820E)USB
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F271i
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : MRA58K release-keys
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 1551701753
Product Model : F271i
Product Brand : LYF
Product Name : F271i
Product Device : F271i
Product Board : F271i
Product Manfct : Chino-E
Board Platform : sp9820e
Product Info : F271i
SecInfo :
IMEI[1] : 911XXXXXXXXX29
IMEI[2] : 86XXXXXXXXXX20
IMEI[3] : 86XXXXXXXXXX38
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SIMLOCK : SignedType
UserData : STATE : ENCRYPTION
Done!
Elapsed: 00:00:56
Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : LYF : F271i
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:24
THANKS INFINITY-BOX TEAM