COM5 [Serial2] selected
module v4.13
Device: _Autodetect MT6228-6268 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E560_MP_IN_H8A_V1_0
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E560_MP_IN_H8A_V1_0.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
startup code area #1 is valid
startup code area #1 detection done
rom info ver: 07
sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_MP_IN_H8A_V1_0.BIN
project-id: E560_MP_IN_H8A_V1_0, 469C3E4B
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
====================
New firmware found (v.4.13, database date: 22.12.2011):
TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_MP_IN_H8A_V1_0.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
mtk@infinity-box.com or upload files to
http://rapidshare.com or
http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 32Mb
number of areas/bytes to read: 1:02000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\InfinityBox\MModule\TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_MP_IN_H8A_V1_0__firmware_20120130-173758.B4M.bin
Disconnect...
done
file saved: c:\InfinityBox\MModule\backup_security\TINNO35_09A_PCB01_GPRS_MT6235B_S01.E560_MP_IN_H8A_V1_0__system_log_20120130-173840.B4X.bin