Infinity Box Dongle [CM2] [BEST] Support

Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

- Core
Protocol updated
Error handling, error explanation and hint module updated

- Service
NVM operations revized
DiagMode option activated ( Platform -> Control -> DiagMode )
> Change SW mode to diag, instead of flash. Do not require BootSelection.
Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !

New Identify option - device Platform, Device HW details identification
> Allow detect device SOC family, RAM amount for faster loader selection
> Work in DiagMode, Work ON MODERN and UNISOC chipset only !

- Flasher
Optimized flashing protocol
Optimized older device line support
NVManager updated - Identify, Backup, Security swap
NVManager Recovery tool updated

- Firmware Reader
Optimized structure identification
Activated "forced" reading. Option skip data verification.
> In case of semi-damaged devices, if backup atleast of something required
> In case of "Critical data damaged" errors
Optimized data verification during create FW

- Database:
SC983xx generic loader DB updated
SC9853i generic loader DB updated
SC7731E generic loader DB updated
SC7731x generic loader DB updated
SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
SC7731c/g loaders DB updated - various models and RAM size
SC9832E loaders DB updated - Meizu, Wiko
Some other various models with specific hw settings included in loader DB

- Other
Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
Bug fixes and changes according users requests

- Special thanks to respected Mr. gracy_elec

https://www.infinity-box.com/support/?r=100090

Infinity Data Explorer v1.01 - new features and improvements

Data extraction based on full reconstruction of file system

- NAND flash types are partially supported
- Additional information extraction supported such as IMEI(s), User Code
- More contacts types are supported
- Open folder with result file(s) after finish: option can be enabled in `Settings` page
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089

Infinity Shell v1.52 released

- models database updated
- models database update procedure improved

Infinity Data Explorer v1.02 - more devices and CPU types supported

Data extraction based on full reconstruction of file system

- MTK module updated: more device supported
- SPD based firmware images are supported (spd6530 - spd6531 cpu)
- Show Additional info (IMEIs, User Code) for SPD based firmware images
- Contacts save procedure improved
- GUI improvements
- Analyze engine improvements
- Minor bugs fixed

Infinity Chinese Miracle-2 MTK/Mediatek v2.07 - New models and features

Core:
NewSOC : MT6785 support under test
NewSOC : MT6885 support under test
Changed : Protocol updated for RAPHAEL line
Changed : Protocol updated for LEGACY line
BugFix : MT6752 support fixed
BugFix : MT8172/MT8173/MT8176 BROM support fixed
BugFix : MT6570 support fixed
Changed : EMI engine revised
Changed : AutomaticBoot selection revised. More types and combinations are supported.
Changed : Loader v1924 supported and tested
Changed : Loader v1936 supported and tested
Changed : Loader v1944 supported and tested

Flasher :
New feature: unmerged signature support
- Files with external signatures now flash correctly
New feature: Forced mode for Raphael line
- Allow automatically skip repartition, erase operations if it was not allowed without break flashing
New feature: WHOLE Flash Pre-Erase
- Erase whole USER region. Destroy ALL data include unique and secure one! Support both Modern and Legacy lines.
Changed: Repartition procedure rebuild to support modern devices and special cases (user memory issues and other fixes)
New feature: Smart erase
- In manual mode selection and enabled pre-erase all unchecked partitions will not be touched
- Storage boundary checks now works correct on legacy and modern lines

Firmware Reader / Maker:
Changed: Local DB updated to latest version
Changed: Scatter creation support latest platforms and variants
Changed: Scatter compatibility with SPFT optimized ( for DL only mode )
New feature: FileSystem creation and params now generated according Android version
New feature: Ability to skip "critical" partitions verification during read ( bl-unlocked devices and specific cases )

MemoryTool:
New feature: Switch working mode ( ADR - PRT options in global settings ) without tool restart (no need to exit and run software again)
New feature: Error ignoring on RAPHAEL line devices. Errors are not triggers shutdown anymore.
Changed: Update PMT operation rebuild. Support modern devices and use multiple factors now.
Changed: Init preloader operation. Support plain preloader dumps that was created by MemoryTool.
Changed: Partition listing style on LEGACY devices. In case of protected regions do not triggered shutdown anymore.
Changed: Write operation now handle correctly some sparse images used in Android 9 and newer versions

Service:
BugFix: Format FS procedure updated
BugFix: Reset FRP procedure updated
BugFix: Identify procedure updated and revised
New feature: eMMC life counter check during Identify
- Show, if possible by Agent or HW, storage life status. LifeCycleEnd(ReadOnly), LifeCycleNearEnd states.
- Support only Raphael newer than MT6739. Support NAND devices as well ( MT6570 )

UserData:
New feature: Reset Privacy Locks
- Support old and modern devices. Procedure is USERDATA SAFE if that required

LoaderDatabase:
Base Loader v1924 included
Base Loader v1936 included
Base Loader v1944 included
New TECNO sec agents included
New VIVO sec agents included
New ALCATEL sec agents included
New Hisense sec agents included
New Moto sec agents included
New Huawei sec agents included
New Lenovo agents included
And other different and generic models can be found in list

Other:
Changed: Base DB revised, unused and "buggy" types removed from BASE agents.
- Change settings if DA version not contain your device platform
Changed: EMIDb updated, more types supported
Changed: Preloader parser now shows more complete memory details

Thanks to:
Special thanks to respected Mr. gracy_elec
Special thanks to respected Mr. Kamal_singla

Infinity Data Explorer v1.03 - RDA based firmware images are supported and more

Data extraction based on full reconstruction of file system

- MTK module improvements
- RDA based firmware images are supported
- Show Additional info (IMEIs, User Code) for RDA based firmware images
- GUI improvements
- Minor bugs fixed

Infinity-Box [BEST] NK2 v1.20 - 220.4G, 2.3 and more !

HMD Nk 220 4G (2019)
Nk 220 4G - TA-1148, TA-1155, TA-1171
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode
- Backup security

HMD Nk 2.3 Ironman
Nk 2.3 - TA-1206, TA-1209, TA-1211, TA-1214
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- MTK SP
Flash Engine updated
Updated loader database
Nk 2.3 support activated in standalone mode

- SPD FP
SVC engine updated
Nk 220 4G support activated ( partial )
UserCode reading revised
Identify revised

- Support
New firmwares for supported models can be found at support area
New drivers for 105/110/220 can be found at support area

Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 and more

- Support for PACv2 format activated
- Core updated
- Protocol updated
- SC9820E support activated ( Generic and Secure types )

- Repair security option activated
Allow repair device security items on generic devices
Work in Flash mode
Work in DiagChan mode
SimLock-enabled devices may NOT work
Security-enabled devices will NOT work

- Firmware Flasher updated
Updated core
Updated PAC types support
Revised NVManager

- Firmware Reader updated
More accurate data verification
Reading speed optimized for some UniSoc models
Android version-depend mode activated ( allow avoid flashing issues on android 9 and newer )
KaiOS devices supported ( SC7731E eMMC, SC9820E eMMC tested and working ) now for Read Firmware

- Identify procedure revised
Now it also support for security verification ( signed NV )
Better FS state verification
More usable build props info extraction

- Revised manual mode selection and possible combinations ( can combine firmware and loader from any source )

- Loader database
SC7715 eMMC loaders included
SC9820 loaders updated
SC9863 loaders updated
SC9820E eMMC loaders included
Various range of models from Wiko, LYF, BLU, BQ, Symphony, Itel and others included in DB

- Other
Bug fixes and changes according users requests

- Extra
Xiaomi QIN 1S+ supported ( Identify, Repair, Firmware Reading, Reset Settings ) BKey : Call button
Xiaomi QIN 2 supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button
Xiaomi QIN 2 Pro supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button

Special thanks to respected Mr. gracy_elec

https://www.infinity-box.com/news/?r=3950

Infinity Data Explorer v1.04 - SPD functions improved, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS message extraction for SPD released. Multipart SMS messages are supported
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improvements
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089

Infinity Data Explorer v1.05 - MTK functions for SMS released, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS extraction for MTK activated, supports multipart sms supported as well
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improved
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089

Infinity Chinese Miracle-2 MTK/Mediatek v2.08 - New models and repair features

As ordinary, uniques functions and methods released.

Please do not forget to download new drivers v5.1632_x86_x64 !

Core:
Changed : Loader v1952 supported and tested
BugFix : Rebuild support for MT6572 line ( KaiOs and old devices )
Changed : Automatic selection of higher available BASE loader at startup
Changed : Automatic protocol switching for RAPHAEL line
Changed : Initial META protocol support
Changed : AutomaticBoot selection revised. More types and combinations are supported.
Changed : Protocol updated for RAPHAEL line

New feature : Meta protocol support activated
!*Support Legacy line ( MT6572 .. MT6595 )
!*Support Raphael line ( MT6750 .. MT6797 )
!*Support Modern Raphael line ( MT6761, MT6765 and newer )

Function : Identify ( AP/MD, SWversion info, Security details )
Function : Reset Settings / Format FS ( NOT touch FRP )
Function : Repair security for
Legacy line ( from MT6572 and up to 6580 )
Raphael line ( from MT6570 to MT6765 etc. )

!*Devices with SLA will not work for repair without auth! ( even if Meta started )
!*Devices with OTP will not work for repair! ( SW will just show write error )

Service:
Changed : Format FS procedure updated
BugFix : Identify procedure updated and revised
Changed : eMMC life counter check ( Raphael, more accurate status handling for latest loaders )

UserData:
Changed : Reset Privacy Locks procedure updated

MemoryTool:
BugFix : Long-run reading optimized for RAPHAEL line

Firmware reader:
Changed : Updated support for legacy platforms
Changed : Updated support for MT6739 FP-like and KaiOS phones
Changed : Local database update
Changed : Data verification improved
Changed : More types supported

Flasher:
BugFix : In some cases were made wrong SV5_BL image selection for EMI base
Changed : Protocol updated for RAPHAEL line
Changed : Protocol update for LEGACY line
BugFix : Flash Erase ( whole mode ) revised
BugFix : Flash Pre-Erase ( safe upgrade mode ) revised

Other:
Changed : Boot helper updated. Take attention to software logs and follow them. In most cases that enough to setup correct settings
New feature : Reboot option activated in main tab. Switch charge / power off mode after operations
New feature : META switch option activated in main tab. Used to switch SW between FLASH and META mode
Changed : Loader database updated
Changed : Minor changes in GUI, check buttons/fields hints to know more about alternative modes and special options of supported functions

Info:
META require working device condition. Charged battery (more than 20%). Installed drivers.
New drivers v5.1632_x86_x64 is at support area.

https://www.infinity-box.com/support/?r=100102

Infinity Chinese Miracle-2 MTK/Mediatek v2.09 - SP-unlock for modern platforms and more

As ordinary, uniques functions and methods released

Core
BugFix : SelfLearning ( Automatic Boot Selection ) feature updated
!*In some cases may require repeat learning for some platforms

New Feature : Enter META from BROM mode
!*Support LEGACY legacy
!*Support RAPHAEL line
!*In case of secure fuse, auth can be used ( setup in model selection, or manual select as AUTH file )
!*May not work in TestPoint cases on some platforms

Service
Changed : Repair security procedure updated (Flash and Meta mode)
Changed : SPUnlock procedure updated (Flash and Meta mode)
Changed : Unlock in Meta mode activated for modern platforms ( MT6739 and newer )
Changed : Identify procedure updated

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types
BugFix : Fixed some old platforms support

MemoryTool
Changed : Path Selection now automatically select files in WRITE FILE fields if they are exists in selected folder

Flasher
BugFix : Fixed flashing for old slow platforms ( MT6735 / MT6580 )

Meta protocol functions updated
Changed : Identify now read all Android info, like in FlashMode
!*Feature will not work on old devices ( Android 4.x, MT6572 and similar legacy chip typess )
Changed : Updated security detection feature
BugFix : Updated different Legacy and Modern platforms support
Modem warmup not cause fatal errors on some old phones
Modem-less devices detection ( wifi tablet / smartwatches )
Changed : Format FS revised
*!Some models can not be reset with that feature ( found in some Oppo )
BugFix : Updated structure verification
Changed : Repair Security rebuild, support more types and non-standard cases

New Feature : SP Unlock
Tested and confirmed as working in LEGACY line ( Teseted with MT6735, MT6580, MT6752, MT6753. Should works on other legacy chip types )
Tested and confirmed as working in RAPHAEL line ( Teseted with MT6739, MT6761, MT6755, MT6750. Should works on other Raphael chip types )
We are looking for user reports and interest test cases

Other
BugFix : Some minor changes and bugfixes

https://www.infinity-box.com/support/?r=100104

Infinity Data Explorer v1.06 - Android contacts/sms support and more

Data extraction based on full reconstruction of file system

- Contacts and accounts reconstrucion from Android storage contacts2.db
- SMS messages reconstrucion from Android storage mmssms.db
- Data storage engine rebuilded
- TXT file storage format updated
- Minor bugs fixed

Infinity Data Explorer v1.07 - SPRD engine rebuilded and more

Data extraction based on full reconstruction of file system

- SPRD engine rebuilded
- contacts save method updated
- long SMS parse method updated
- HTML export released (via templates)
- gui: log autoclear option before new operation
- gui: pop-up menus for log (clear and save options)
- folder with date/time creation for Converter
- Minor bugs fixed

Infinity Chinese Miracle II SCR/SPD-RDA v1.06 - New models and features

As ordinary, unique functions and methods released

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC7702 ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC7702
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

Core
NewChip: Support UNISOC 8910 (FLASH) under test
NewChip: Support IVY IoT (FLASH/SVC) under test
Changed: UpToDate Protocol changes for latest FP platforms ( UniSoc )
BugFix: Connection on SPRD tab
BugFix: BOOTROM mode on latest SC6533G branches

Support UNISOC 8910DM / UIS8910 chipset ( SVC mode )
- Identify ( Security info, compilation info, modem info , APinfo )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
!* Generic types only

New Feature: SVC ( Diag ) mode support for SPRD / UniSoc
- Identify ( Security info, compilation info, modem info )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
!* Generic types only

Service
BugFix: Security repair not allow use some "non-standard" combinations ( RDA / SPRD / UniSoc )
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: GUI revised for repair part ( CS info, Automatic complete at double click for security fields )

UserData
BugFix: Security code read in FlashMode revised ( SPRD )

Other
BugFix: Lot of small different changes and fixes