Page 22 of 32

Re: Software Updates and News

Posted: 28 Nov 2018, 19:51
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.02 - new features, loaders, improvements

- Base
Base - Read info from EMI base (preloader) in manual mode after selection
Base - Info reading improved ( in some cases device info can be empty )
Base - Manual mode selection revised ( Boot fail issues in manual mode )

- MemoryTool
MemTool - Partition types detection improved
MemTool - Interface changes ( partition selection style changed, menu sctructure changed )
MemTool - work with boot1/boot2 section revised for LEGACY line
MemTool - InitPreloader option activated ( LEGACY/RAPHAEL )
MemTool - Flash service regions read/write now allowed ( if they not set as protected - i.e. OTP )

- Flasher
Flasher - Removed "Skip preloader" option, use selection instead ( untick preloader from flashing list )
Flasher - Customization model revised
Flasher - DL Fix / ADL Checksum revised
Flasher - Preloader initialization during flashing revised
Flasher - More accurate PMT/GPT rebuild, for compatibility with SPFT ( PMT invalid issues after servicing with MT2 module )

- Firmware Reader
FWReader - Scatter compatibility for spft optimized (6735, 6737)
FWReader - More types supported for safe read
FWReader - Info reading improved ( in some cases device info can be empty )
FWReader - SW path settings also accepted now on FW read

- Platform changes
Platform - MT6589 support optimized
Platform - MT6592 support optimized
Platform - MT673x support optimized

- Loader database
LoaderDB - New agents included ( BQ, TECNO, INFINIX, VIVO )

- Other
Other - Lot of small fixes and changes, reported by users

https://www.infinity-box.com/support/?r=100052

Re: Software Updates and News

Posted: 28 Nov 2018, 19:52
by Support
Infinity-Box [BEST] NK2 v1.09 - FP Forensic and other features

- Forensic engine for MTK feature line devices rebuild from scratch
Allow extract phonebook memory from alive/dead/semi-dead devices
From now allow extract phonebook from memory dump ( made by external prommer or older BEST versions )
> Press and hold SHIFT key before press "Extract PhoneBook" button for enable File mode
Extraction is direct (from device) and from dump
Support unicode

All existing MTK FP models are supported now for PhoneBook extraction:
Nokia 108: RM-944, RM-945, RM-1124
Nokia 220: RM-969, RM-970, RM-971, RM-1125
Nokia 225: RM-1011, RM-1012, RM-1043
Nokia 130: RM-1035, RM-1036, RM-1037, RM-1122
Nokia 215: RM-1110, RM-1111, RM-1112
Nokia 105: RM-1133, RM-1134, RM-1135
Nokia 222: RM-1136, RM-1137
Nokia 230: RM-1172, RM-1173
Nokia 216: RM-1187, RM-1188
Nokia 150: RM-1189, RM-1190
Nokia 3310(2G): TA-1008, TA-1030
Nokia 105(2017) : TA-1010, TA-1034, TA-1037
Nokia 130(2017) : TA-1017, TA-1019

- Changes/Fixes
> MTK FP line
Fix/Change: Flash engine revised
New feature: SW version check during flashing activated. SW will verify data between phone and VPL.
> In case of device dead ( no SW version data available ) - SW will warn about it.
New feature: Complete language info during FlashFile selection ( will show all existing languages without need of manual flashing and verify )

> MTK SP line
Fix/Change : Flash engine revised
Fix/Change : Repartition may fail during NK1 flashing, fixed

https://www.infinity-box.com/support/?r=100055

Re: Software Updates and News

Posted: 31 Dec 2018, 08:52
by Support
Infinity Samsung `SM` v2.05 released

Service: added new version of Reset FRP procedure (without user-data lost)
How to use: check "new" checkbox and follow instructions

Infinity Samsung `SM` software activation price is 80 credits from today due to `SM` v2.05 released

https://www.infinity-box.com/support/?r=100058

Re: Software Updates and News

Posted: 31 Dec 2018, 08:56
by Support
Infinity Pinout database v1.63 released

- new pinouts are in database - some information about boot key etc. included

https://www.infinity-box.com/news/?r=3807

Re: Software Updates and News

Posted: 31 Dec 2018, 08:57
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.03 - MT817x Series support, new features

Base:
Base - DA v1844 support tested on all platforms
Base - MT8172 support activated
Base - MT8173 support activated
Base - MT8176 support activated
Base - Info reading improved ( in some cases device info can be empty )
Base - Startup issues on some machines fixed
Base - Autoupdate feature revised

MemoryTool:
MemTool - Partition types detection improved
MemTool - InitPreloader option revised

Flasher:
Flasher - Activated flashing support for LEGACY signed FW types ( ver3, ver4 )
Flasher - Customization model revised
Flasher - DL Fix / ADL Checksum revised
Flasher - Cheksum issue on 6572/6582 fixed
Flasher - MT6570 NAND support fixed
Flasher - Flashing support for secure FW readout from LEGACY signed devices ( fused )
Flasher - More info, state and other debug stuff during secure types flashing

FWReader:
FWReader - Activated reading for LEGACY secured phones ( for fused devices )
FWReader - Secure state and signature type info during reading
FWReader - Secure workaround for cpu-paired security on fused devices ( FW completey safe for flashing )
FWReader - More types supported for safe read
FWReader - Info reading improved ( in some cases device info can be empty )

Other:
Other - Preloader parsing issues with some new platforms fixed
Other - Lot of small fixes and changes, reported by users
Other - BootHelper updated

Service:
Service - Security repair revised
Service - FixDL option activated
Service - Format FS revised, ENCRYPTION issues, bootloop issues fixed on some platforms/devices

Platform:
Platform - MT8172 support activated
Platform - MT8173 support activated
Platform - MT8176 support activated
Platform - MT2601 support activated
Platform - MT6582 support optimized
Platform - MT6572 support optimized

Loaders:
LoaderDB - New agents included (Teksun, Lenovo, Tecno, CAT, COMIO, Gionee)

Thanks to : kamal_singla, gracy_elec and other our users for providing files and/or testing

https://www.infinity-box.com/news/?r=3808

Re: Software Updates and News

Posted: 09 Jan 2019, 13:19
by Support
Infinity Pinout database v1.64 released

- new pinouts are in database, some information about boot keys and other information included

Re: Software Updates and News

Posted: 29 Jan 2019, 10:06
by Support
Infinity Samsung `SM` v2.06 released

Flashing: added support for lz4 partitions flashing
System: AutoReadInfo procedure removed to make connection more stable and faster
Minor bugs fixed

Infinity Samsung `SM` software activation price is 85credits from now due to `SM` v2.06 released

Re: Software Updates and News

Posted: 29 Jan 2019, 10:06
by Support
CM2SPD Drivers Pack v1.02 released

CM2SPD Drivers Pack v1.02 uploaded to support area

Re: Software Updates and News

Posted: 29 Jan 2019, 10:07
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.04 - New chips support and new features activated

Base:
Base - MT6761 support activated
Base - MT6765 support activated
Base - MT6771 support activated
Base - Secure boot - ARB verification during boot ( via BROM logging )
Base - Secure boot - SLA challenge state verify ( pass-trought file or nonce challenge )

FWFlasher:
FWFlasher - Some ancient secure devices flashing optimized ( early 6572 and similar )
FWFlasher - MT6753/MT6752 flashing revized
FWFlasher - Pre-flash backup option enabled
FWFlasher - Flash core updated

FWReader:
FWReader - More accurate FW verification for signed types ( issues after FOTA "garbaging" )
FWReader - ARB state and version, if present ARB bit
FWReader - AVB state and version, if present AVB secure mechanism
FWReader - FW logging info - if SW show it during load - make sure device contain SAME or LOWER version!
FWReader - More types supported for safe read
FWReader - Info reading improved

Service:
Service - Security repair revised ( NVRAM verify and some "old" types support )
Service - "Repair BaseBand" option activated
Service - Format FS revised
Service - NVRAM module updated

MemoryTool:
MemTool - Improved work with partitions on LEGACY line
MemTool - Wipe operation optimized ( def and adr mode )

Platform:
Platform - MT6761 support activated [ Under test ]
Platform - MT6771 support activated
Platform - MT6765 support activated
Platform - MT6753 support optimized
Platform - MT8172 support optimized
Platform - MT8176 support optimized
Platform - MT8163 support optimized
Platform - MT8127 support optimized

Loaders:
LoaderDB - New agents included ( Moto, Huawei, ZTE, Asus and others )

Other:
Other - Lot of different small changes and fixes
Other - BootHelper updated
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated - MT6765/MT6771/MT8176/MT8172/MT8173/MT6753 supported
Other - Automatic backup during Identify and critical operations ( list can be tuned via edit settings.ini )
Other - Partial LEGACY NAND support ( complete boot/verify ) for testing purposes for now - MT6580, MT81xx series
Other - All settings ( except FLASH tab and Platform Settings group ) now saved/load automatically

Many thanks to: bRkA, gracy_elec and other our users for providing files and/or testing

Re: Software Updates and News

Posted: 03 Oct 2019, 09:14
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.05 - New models and features

Base:
Base - Secure boot - ARB verification revised for some secure configs and chips

FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised ( SECCFG options and other issues fixed )
FWFlasher - MT6753/MT6752 flashing revised

FWReader:
FWReader - More accurate type detection on LEGACY lines
FWReader - More types supported for safe read
FWReader - Info reading improved

Service:
Service - "SimLock Reset" option activated - used to rollback all LockSettings to default
Service - Format FS revised
Service - Repair BB revised
Service - NVRAM module updated

Platform:
Platform - MT6771 support optimized
Platform - MT6753 support optimized
Platform - MT8127 support optimized

Loaders:
LoaderDB - Lot of new agents included (Alcatel, Moto, Lava and others)

Other:
Other - Many different small changes and fixes
Other - Some kind of GUI changes for better user expirience
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated
Other - Preloader tools, Preloader init and other related stuff updated
Other - Scatter handling optimized for some vendor-specific stuff
Other - Automatic backup revised (manual tuneup fix)
Other - Partial LEGACY NAND support (complete boot/verify) - Identify option works now on some devices

Info:
Info: Alcatel support for NEW line devices restricted by PRELOADER level ONLY! Some partitions are PROTECTED! BROM mode not supported for now ( due remote SLA )
Info: LEGACY secure flashing now pass at any base settings but IN SOME RARE CASES (like Huawei and similar) it may lead to BaseBand and other problems.
Solution - REFLASH using CORRECT DA!
Info: ARB nowdays appearing on more devices, make sure about you FLASH SAME version. (Identify ARB LOG and SW load LOG ) Not upgrade to newer ones, if need make some extend service etc. !

Re: Software Updates and News

Posted: 03 Oct 2019, 09:15
by Support
Infinity Chinese Miracle II SCR/SPD-RDA v1.04: New models and features

Supported CPU list:
Spreadtrum : SC6530, SC6531, SC6531(A/C/D)
UniSoc : SC6531E, SC6533, SC6533G
RDA Mirco : RDA8851 rev A,B,C,L,CL
RDA Micro : RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G :
Flashing protocol updated
BOOTROM mode support revised
Updated LOD tools ( flashing / customizing )
Repair security revised (
-> FAC area rebuild
-> 3rd item repair activated
UserCode reading activated

Spreadtrum SC6530/6531/A/C/D/E:
Revised Repair security feature
Flashing revised
-> Secure/Signed lines flashing rebuild
-> Masterimage build revised
-> Whole flash erase fixed for NOR devices
Internal loaders updated
Database revised, loaders re-marked

Spreadtrum other:
Protocol updated, stuck issues during wrong boot selection fixed
Improved Flashing procedure for SC7701/SC7702 devices
Flashing customization module revised
InternalDB/ExternalLoader detetection/selection revised

Re: Software Updates and News

Posted: 03 Oct 2019, 09:15
by Support
Infinity Pinout database v1.65 released

- new pinouts are in database, some information about boot keys and other information included

Re: Software Updates and News

Posted: 03 Oct 2019, 09:16
by Support
Infinity-Box [BEST] NK2 v1.10 - Nokia 3310 3G support and new features

- Nokia SPRD tab activated
Nokia 3G SS [TA-1006] supported
Nokia 3G SS [TA-1022] supported
Nokia 3G DS [TA-1036] supported

- Identify
- Reset Settings / Format FS
- Firmware Flashing ( cross, nvm update, lang change )

Info: Device security paired, store all NV backups to emergency case !
Info: Crossflashing can be done and not touch security ( require enable NV update )

- Nokia SP tab changes
Identify now read BOTH part info for A/B devices
Flash Engine updated
"UserData preserve" mode updated
Format FS / Reset FRP revised

Nokia 5.1+ ( Nokia X5 ) supported ( TA-1102, TA-1105, TA-1108, TA-1109, TA-1112, TA-1120 )
Nokia 3.1+ supported ( TA-1104, TA-1113, TA-1115, TA-1117, TA-1118, TA-1125 )

- Identify
- Reset Settings / Format FS / Reset FRP
- Firmware Flashing

- Nokia FP tab changes
PhoneBook extraction engine updated
Extract "from file" revised
Flash Engine updated

Re: Software Updates and News

Posted: 03 Oct 2019, 09:16
by Support
Infinity-Box [BEST] NK2 v1.11 - More MTK and SPRD features activated

- Nokia SPRD tab
Activated Flash Dump feature
Support another signed base driver ( can be found on support for both x86 and x64 systems )
FlashEngine updated

- Nokia MTK SP tab changes
Flash Engine updated
MT6755 line has been broken in previous release, fixed

- Nokia MTK FP tab changes
PhoneBook extraction engine updated
Flash Engine updated
Backup security feature released, allow store device security
Restore security feature released, allow restore device security backups
Backup now also made during "Identify"
During backup security RPL will be cleaned and prepared ( all counters reset and default mtk settings/options set )

- Other
Minor bugfixes and changes

- Additional info
SPRD flash backups can be sent for processing via IOS FileUploader for adding new LangPacks on support.
ETA of processing - 48 hours, then files can be found on support. All other ways will be ignored.

NEW SPRD DRIVERS should be installed !

Re: Software Updates and News

Posted: 03 Oct 2019, 09:16
by Support
Infinity-Box [BEST] NK2 v1.12 - Nokia 106 (2019) line support activated

Next revision of Nokia 106 (2019) are supported:
Nokia 106 (2019) : NEMO : TA-1114

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )
> Backup security
> Restore security
> Repair security ( via SWP )
> SP unlock ( via SWP )
> Complete repair ( via SWP )

*SWP feature allowed due to Nokia security flaw, made in Nokia 106 and affect this model only for now.

- Base
Loader database updated
Bugfixes and minor changes

- Support
Some firmwares for Nokia 106 can be found on support now