Infinity Box Dongle [CM2] [BEST] Support

Infinity `SM` software v2.01 released

- Service - add `Read Log` option for unlock Exynos phones via server
- some bug fixed

https://www.infinity-box.com/support/?r=100036

Infinity-Box BEST NK2 v1.04 - Nokia MTK standalone support activated

ATTENTION: To run this software you should copy licence file license_xxxxxxxx.dat from /BEST/ folder to /BEST2/ folder

Nokia MTK standalone support activated !

- Main
MTK SP line support activated !
For now the next features are supported:

Nokia 1: FRT : FRONTIER : TA-1047/TA-1060/TA-1056/TA-1079/TA-1066
Flashing ( Factory/BEST NB0 files )
Dead Boot repair
Reset Settings / FileSystem
Reset FRP
Identify
Repair Security
SP Unlock

Nokia 3: NE1 : ESSENTIAL1 : TA-1020/TA-1028/TA-1032/TA-1038
Flashing ( Factory/BEST NB0 files )
Reset Settings / FileSystem
Reset FRP
Identify
Repair Security
SP Unlock

Nokia 3.1: ES2 : ESSENTIAL2 : TA-1049/TA-1057/TA-1063/TA-1070/TA-1074/
Flashing ( Factory/BEST NB0 files )
Dead Boot repair
Reset Settings / FileSystem
Reset FRP
Identify
Repair Security
SP Unlock

- Other
Flashing core revised

Info:
- MTK devices support is free and standalone
- Firmwares can be found on support area
- Firmware files need only for flashing, rest operations not require them
- Make sure you select correct files for your device! ( Nokia 3 specific for now )

https://www.infinity-box.com/support/?r=100037

Support area for Infinity `SM` software activation

Separate support area opened for Infinity `SM` activation users. Login to suport area the same way as to other support areas via IOS `Support & Downloads`

Infinity Pinout database v1.62 released

- new pinouts are in database
- some information about boot key etc. included

https://www.infinity-box.com/support/?r=100038

Infinity `Shell` v1.49 released

.user interface changes
.updates/news check updated
.models database updated

https://www.infinity-box.com/support/?r=100039

Support area content updated

.support area updated with many NVM files for different models

Infinity `Shell` v1.50 released

.user interface changes
.models database updated
.auto-update of models database
.minor improvements

https://www.infinity-box.com/support/?r=100040

Infinity `SM` software v2.02 released

Service changes:
- Downgrade modem procedure released. This operation may be dangerus so use at own risk and only if you are really know you need it !
- rebuild Reset FRP procedure
Internal changse:
- a lot of changes related to use server functions
- bug fixes and internal improvements

https://www.infinity-box.com/support/?r=100041

Infinity-Box [BEST] NK2 v1.05 - Nokia 3310(2G), Nokia 5.1 and other models support activated

Nokia 3310(2G), Nokia 5.1 and other models support activated !

- Nokia MTK Feature line support activated
- Nokia 3310(2G) line support activated !

Next revision of 3310 (2G) are supported:
Nokia 3310 : RETRO : TA-1008/TA-1030

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )

Other models support enabled ( supported in BEST v1.xx line ) :
Nokia 108: RM-944, RM-945, RM-1124
Nokia 220: RM-969, RM-970, RM-971, RM-1125
Nokia 225: RM-1011, RM-1012, RM-1043
Nokia 130: RM-1035, RM-1036, RM-1037, RM-1122
Nokia 215: RM-1110, RM-1111, RM-1112
Nokia 105: RM-1133, RM-1134, RM-1135
Nokia 222: RM-1136, RM-1137
Nokia 230: RM-1172, RM-1173
Nokia 216: RM-1187, RM-1188
Nokia 150: RM-1189, RM-1190

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )

Changes from v1.xx line:
Complete protocol rebuild - faster, safer, more stable
FW read/make now direct, do not need additional read/convert operations
FW read now more faster
Devices not stuck in flash mode after some operations

- Nokia 5.1 : CO2 : TA-1061/TA-1075/TA-1076/TA-1081/TA-1088
> Flashing ( Factory/BEST NB0 files )
> Reset Settings / FileSystem
> Reset FRP
> Identify
> Repair Security
> SP Unlock
Support is standalone, no server and/or credits required !

- Changes/Fixes
> MTK SP line
Nokia 1: FRT : FRONTIER : TA-1047/TA-1060/TA-1056/TA-1079/TA-1066
Fixed BROM mode support
Fixed dead mode flashing
Fixed SP unlock

Nokia 3.1: ES2 : ESSENTIAL2 : TA-1049/TA-1057/TA-1063/TA-1070/TA-1074
Improved flashing in MTK mode
Fixed issues with FOTA after flashing

> QLM SP line
Removed legacy servicing methods
Flashing engine updated

- Other
Settings Tab activated
> Setup FeaturePhones DataPackage path
> Setup SmartPhones DataPackage path
> Setup IOS user credentials ( for use server-based operations )
Lot of fixes and global changes at all

- Support
Hundreds of firmwares for Nokia 3310 (2G) are in support area
> Check out for need region packages or language packages on support area first! Or read from any well working device which you have.
Nokia 230: RM-1172, RM-1173 - HMD and MS LEGACY different firmwares are in support area
Nokia 216: RM-1187, RM-1188 - HMD and MS LEGACY different firmwares are in support area
Nokia 150: RM-1189, RM-1190 - HMD and MS LEGACY different firmwares are in support area

https://www.infinity-box.com/support/?r=100043

Infinity-Box [BEST] NK2 v1.06 - FP Forensic and other changes

- Activated Forensic engine for MTK feature line devices
Allow extract phonebook memory from alive/dead/semi-dead devices
Extraction is direct ( from device )
Support unicode

Following models are supported for PhoneBook extraction:
Nokia 108: RM-944, RM-945, RM-1124
Nokia 220: RM-969, RM-970, RM-971, RM-1125
Nokia 225: RM-1011, RM-1012, RM-1043
Nokia 130: RM-1035, RM-1036, RM-1037, RM-1122
Nokia 215: RM-1110, RM-1111, RM-1112
Nokia 105: RM-1133, RM-1134, RM-1135
Nokia 222: RM-1136, RM-1137
Nokia 230: RM-1172, RM-1173
Nokia 216: RM-1187, RM-1188
Nokia 150: RM-1189, RM-1190
Nokia 3310(2G): TA-1008, TA-1030

- Changes/Fixes
> MTK FP line
Fix/Change: Flash reading on some configurations may fail, fixed
New feature: Activated speed selection setting (see software settings tab) Default value - Normal. Speed TOO MUCH depend on this configuration value !
Fix/Change: Flash engine revised
New feature: Activated complete FlashPackage verification during FWSelect and Flashing

> MTK SP line
Fix/Change: Flash engine revised

https://www.infinity-box.com/support/?r=100044

Infinity-Box [BEST] NK2 v1.07 - Nokia 130 (2017) support and new features

- Nokia 130 (2017) line support activated !

Next revision of Nokia 130 (2017) are supported:
Nokia 130 (2017): KESA : TA-1017/TA-1019

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )

- Changes/Fixes
> MTK FP line
Fix/Change: Flash engine revised : Automatic Repair Mode enable, if device semi-dead
Fix/Change: AutoID in case of semi-dead device state may fail, fixed

- Support
Hundreds of firmwares for 130 (2017) have been uploaded to support area
> Check out for required region packages or language packages in support area first! Also you can read from any good working device that you have.


https://www.infinity-box.com/support/?r=100046

Infinity `SM` software v2.03 released

Flashing - partitions list updated to support newest models/devices for flashing
Intrface bugs fixed
Included new procedure to support new FRP Reset method (in test, comming soon)

https://www.infinity-box.com/support/?r=100034

Infinity-Box [BEST] NK2 v1.08 - Nokia 105 (2017) support and new features

- Nokia 105 (2017) line support activated !

Next revision of Nokia 105 (2017) are supported:
Nokia 105 (2017) : N103 : TA-1010/TA-1034/TA-1037

For now the next features are supported:
> Firmware flashing ( Factory/BEST firmware packages )
> Firmware reading
> Format FS / Reset Settings
> Identify ( read complete device info & check/verify security area )

- Changes/Fixes
> MTK FP line
Fix/Change: Flash engine revised
New feature: Firmware Read : Activated extarction of device supported LangPacks during FW read
New feature: "LangPack only change" option for FW flashing activated
Fix/Change: Forensic engine updated
Fix/Change: Flash Read revised

- Support
Hundreds of firmwares for 105 (2017) has been upload to support area
> Check out for required region packages or language packages in support area first! Also you can read from any good working device that you have

https://www.infinity-box.com/support/?r=100047

Infinity `SM` software v2.04 released

Flasing - add Reset userlock / pin / pattern / password in FRP ON + OEM ON mode options
Many bug fixed

How to use Reset User lock options:
- see phone version in Recovery menu
- download COMBINATION file according to the phone version
- check checkbox and add your COMBINATION file
- flash phone
- after write COMBINATION file wait phone is turned on
- phone on in recovery mode, reboot phone
- you have access to phone data
after backup user data - reflash phone

https://www.infinity-box.com/support/?r=100050

Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features

Important:
- Software installed to new folder /CM2MT2/ and designed to support new models

Legacy core support activated:
MT6571
MT6572
MT6580
MT6582
MT6589
MT6592
MT6595
MT6597
MT6732
MT6735
MT6737
MT6752
MT6753
MT6795
MT8127
MT8163
MT8321
MT8732
MT8735
MT8752

Identify: full device info, security info
Flash Factory Firmware
Read Factory Firmware
Reset Settings / Format FS
Reset FRP
Repair Security (Flash Mode, Direct)
SP unlock
MemoryTool - complete device control, service, repair, forensic etc.

- Main
Loader database optimized, size reduced.
DA v1820 line support tested and activated
DA v1836 line support tested and activated
Connection level revised
BROM level support optimized
Optimized and changed HighSpeed port selection
FlashEngine revised
NVRAM tool revised
Global option PWM - allow switch SW between two different work modes for RAPHAEL.
> Use second one if first mode give errors at writing f.e. restore NVRAM on F5 like device etc.
> For LEGACY phone it used in MEMORY TOOL ( WRITE / WIPE )

- Service
Repair Security revised
> Old LEGACY types require FORMAT FS/FACTORY RESET for accept changes !
Format FS - new mode activated: Forced Erase
Format FS - fixed WIPE mode

- Core
EMIDB updated
New EMI engine for LEGACY line
> EMI engine support almost all existing LEGACY line
> New types for RAPHAEL included

- FW reader
LEGACY core supported ( unsigned and static signed types are supported )
New types of firmwares supported
Scatter creation optimized

- Other
Settings tab activated ( firmware path settings and other features can be found here )
AutoUpdate ( module files ) feature activated

Many other changes and fixes

Known issues/warnings/info:
1. FileSystem flashing on some SBC-enabled RAPHAEL devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
2. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list !
3. MT6589 supported ONLY up to DAv17xx line, after DAv1728 support has been removed.
4. MT6592 support on DAv18xx loader line broken ( DA issue )
5. EMI/DRAM init module in LEGACY line is almost auto, but in some case require CHANGE EMI setting, if used internal DB ( since much RAMsize/Revision of eMMC/eMCP )
6. MOST of LEGACY phone can be booted via BROM mode from now ( PLAIN, PRL, SBC )
7. NAND support on LEGACY line is not activated yet

https://www.infinity-box.com/support/?r=100051