Infinity Box Dongle [CM2] [BEST] Support

24-03-2014: Chinese Miracle-2 (Test Version) RDA/Coolsand v0.04 released
.Boot files updated
.Drivers installation package updated
.Internal improvements

27-03-2014: Chinese Miracle-2 (Test Version) RDA/Coolsand v0.05 released
.Boot files updated
.RDA 8852 test support
.RDA 8853 support improved
.CPU ID and FLASH ID detection revised
.User Code read for RDA8853 series released
.Firmware info detection improved
.Flash Partition detection improved
.Internal improvements

03-04-2014: Main Infinity-Box "MModule" v4.47 released
.Skyworth-GMGB100 model under test
.PCD-CL1133 model under test
.Lenovo-A332 model supported
.Philips-X623 model supported
.NGM-Mito model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.security area repair improved (16 new firmwares supported)
.firmware database updated

07-04-2014: Chinese Miracle-2 (Test Version) RDA/Coolsand v0.06 released
.Boot files updated
.RDA 8852/CT1129 support: Read/Write/ReadCode/Format/IMEI
.RDA 8853 support improved
.User Code read for RDA8853/RDA8851 series revised
.Format procedure revised
.Firmware info detection improved
.Flash Partition detection improved
.Internal improvements

21-04-2014: Online Service updated: new price for SL3 unlock
SL3 Unlock price reduced:
Old price: 40 Credits
New price: 30 Credits

29-04-2014: Free test SPD/Spreadtrum software for Main Infinity-Box users
.Chinese Miracle-2 (Test Version) SPD/Spreadtrum software activation for Main Infinity-Box users released
- Software available for free download from Infinity-Box support area
- Infinity Online Service should be used to process this free software Activation
- Login to your Online Service Account and activate your Box for free with new software

Note:
- This software is just a Test Version without any promises and warranty !
- This software future depends on users test report

Please post your Test Reports Here http://forum.gsmhosting.com/vbb/f296/ch ... m-1808794/

29-04-2014: Chinese Miracle-2 (Test Version) SPD/Spreadtrum v0.02 released
.Supported CPU: SPD6530, SPD6531
.Supported Interface: USB, COM/UART
.Supported FlashIc: 4/8/16/32 Mb
.Supported operations:
1. Read Info
2. Check
3. Flash Read (Plain Bin)
4. Flash Write (Plain Bin)
5. Read UserCode
6. Repair IMEI
7. Format/Reset Settings

30-04-2014: Chinese Miracle-2 (Test Version) SPD/Spreadtrum v0.03 released
.Improved Flash detection
.Improved UserCode reading for some original brands (Explay, Phillips)
.Improved Format/Reset setting for some original brands (Explay, Phillips)
.Improved Dual-Type structure support (16mb Touch phones)
.Improved Repair Security (No Ack Error) on some phones
.Minor bugs fixed

01-05-2014: Chinese Miracle-2 (Test Version) SPD/Spreadtrum v0.04 released
.Improved SPD6531 support
.Improved UserCode reading
.Improved Format/Reset setting
.Improved Flash Detection
.Improved Dual-Type structure support
.SpeedUp (x2 times) for some operations
.Flash Read operation improved, Error Correction mode supported
.Minor bugs fixed

25-05-2014: Chinese Miracle-2 (Test Version) SPD/Spreadtrum v0.06 released
.SPD6530 support improved
- User Code read improved
- Safe Format improved

.SPD6531 support improved
- User Code read improved
- Safe Format improved

.SPD6530 Samsung support improved
- Required to select exactly model now
- Improved RepairSecurity
- Improved UserCode reading
- Improved FormatFs
- Improved Flash Write

.General operations
- Dual-Flash IC support for SPD653x series improved
- Dual-type Structure support improved
- CompileInfo extraction revised
- "Smart Format" revised for 6530/6531/6610/6620 platforms
- Initial Detection now support non-standard SPD firmware types (SPD653x)

31-05-2014: Chinese Miracle-2 (Test Version) RDA/Coolsand v0.07 released
.8808, 8806 Series support improved
.Macronix Series FlashIC detection revised
."FactorySets" procedure after flash improved
.Firmware info detection improved
.Flash Partition detection improved
."Smart Format" improved
.Boot procedure revised
.Non-standard paged flash files writing supported
.FactoryArea rebuild revised for 8806 series
.User Code read improved for 8806 series

01-06-2014: Chinese Miracle-2 (Test Version) SPD/Spreadtrum v0.07 released
.SPD6530/SPD6531 support improved
- User Code read improved
- Safe Format improved

.SPD6530 Samsung support improved
- Improved RepairSecurity
- Improved UserCode reading

.General operations
- SPD6610/6620 re-named to SPD6610_ALCATEL
Supported phones: OT-316A/D/S, OT-1051D, OT-1060D, OT-1062, OT-1063
Repair Security not supported yet.
It still possible operate in "SPD6610" mode for Write Flash on other SPD6610/SPD6620
- FileInfo option added. Allow name files after read by Brand/Name/Languages
- Dual-Flash IC support for SPD653x series improved
- Dual-type Structure support improved
- CompileInfo extraction revised
- Initial Detection improved: SPD653x
- Documentation updated
- minor bugs fixed

16-06-2014: Chinese Miracle-2 (Test Version) MTK/MediaTek v0.02 released
v0.02
.Improved USB detection (support for different USB driver versions)
.Improved Initial Boot
.Improved "User Code Reset" operation
.Improved File Verification (Read / Flash)
.Backup improved (Format FFS / Reset User Code)
.USB drivers included
.Some bugfixes

v0.01: Initial Test version
.Support interface: USB only (Test Version limitation)
.Support CPU: MediaTek 625A , MediaTek 6260
.Support FlashSize/Types: All 3/4/8/16 MiB
Operations:
.Read Info/Check
.Read Flash
.Write Flash
.Format FileSystem (Reset Settings)
.Reset UserCode (NO USER DATA LOST)
.Repair Security

21-06-2014: Chinese Miracle-2 (Test Version) MTK/MediaTek v0.03 released
.MTK625A support improved
.Boot procedure fully revised
.FlashID database updated
.CodeDefine base updated
.Improved "User Code Reset" operation
.Repair security improved
.Some bugfixes

04-08-2014: Main Infinity-Box "Calculator" v1.21 released
.Pantech-P9060-Pocket model supported
.Pantech-P9070-Burst model supported