CM2 Anticrack for SPD/Unisoc

[Support]

Anticrack for SPD for test for free

Step 1. Run CM2SP3 and click to [Connect]

Step 2. Select [Unlock BL]
Select [Method A]
Do Bootloader unlock
Power phone On and check bootlogo. If you see [UNLOCK!!!] text on bootlogo - go to Step 5.


If no [UNLOCK!!!] text on bootlogo:
Step 3. Select [Unlock BL]
Select [Method B]
Do Bootloader unlock
Power phone On and check bootlogo. If you see [UNLOCK!!!] text on bootlogo - go to Step 5.

If still no [UNLOCK!!!] text on bootlogo:
Step 4. Selct DIAG mode at top left
Click to [Connect], you will see firmware version and model name. Write to https://t.me/InfinityBoxTalks and Support will tell you something.
The end of story for now.


If you can see [UNLOCK!!!] text on bootlogo:
Step 5. Click to [Connect]
Step 6. [Service] - [Locks] - [Anticrack] - [Off permanently]
Step 7. Click to [Do It]

If you see text [NO VALID OS FOUND] on bootlogo


Step 8. Click to [Connect]
And then [Service] - [Locks] - [Anticrack] - [Restore] and click to [Do It]

Step 9. Now start again with Step 1.

[Support]

Bruteforce, wait... one
Net fail Access denied `00....` Wrong username or password
oem nOk. BL may be still locked

You must enter valid Username and Password for this operation!
For now process is free but valid Username and Password must be entered!
How to get username and password https://infinity-box.com/service/