Badly need support, Turned Phone OFF.

[03C4EA2951]

After i read info with CM2MT2 phone don't turn on anymore - Please need help

from autobackup I have this backup


and manual backup from memory


Flashes that I download for possible try to recover phone


When I try to flash it will flash the system endless
https://youtu.be/0zkl1NtMtdQ
0zkl1NtMtdQ



Read Info with 1.58

Card found : S/N : CB822A50 , v0161
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 13014E51334A39365210040F4DE4C349
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2003
EMICFG_NOT_FOUND
TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!
Boot Error!

Operation Failed
Elapsed: 00:00:07
Reconnect Power/Cable!

When I try to read INFO with scatter loaded it will hang

Operation: Identify [ v2.63 ]
Wait...
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Port: Both [ B + P ]; High-Speed: Off
[-] Force BROM
[-] Local SLA
[+] Auto-EMI
[+] FireFly-Over-DA
- Power device Off [remember Test-Point]
- Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek USB Port_V2023 (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
MEID: E75DDCFD8CEF7B4C7B5C5DEB8CC3D043
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0x05 BL: 0xFE [BOOTROM]
BROM: EMI: Search
EMI: Continue
EMI: Not found
AGENT:
[5fa3ab7e] C:\InfinityBox\CM2MT2\boot\0_base\base_v2112\MTK_AllInOne_DA.2021-07-12.0656ff20.bin
Looking for bootchain in DA...
Found: MT6580; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
NAND: DEVICE NOT FOUND
EMMC: OK
CID: 514E011336394A330F04105249C3E44D
DA v4.2.156
EXT_RAM NOT initialized
EMMC: OK
CID: 13014E51334A39365210040F4DE4C349
NAND: DEVICE NOT FOUND
DRAM: 0x00BC
EMI[0]: Init via internal database
INIT: 0x00BC eMMC [ 0x80000000 [ 2.00 Gb ] ]
RAM: DRAM: 0x80000000 [ 2.00 Gb ]
DA: DRAM ready
Boot to 2nd DA... Ok
Load HW info...
EMMC
CID: 13014E51334A39365210040F4DE4C349 crc Ok
Vendor: Micron OEM: 334 ID: 51334A393652 [Q3J96R] PRV: 0x10
Serial: 68111844 0x040F4DE4
MM/YY: 12/2016
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x3AB400000 [ 14.68 Gb ]

RAM: SRAM: 0x00020000 [ 128.00 Kb ]
RAM: DRAM: 0x80000000 [ 2.00 Gb ]

CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: BE71348F9976144856B24D94DE5529E8
MEID: E75DDCFD8CEF7B4C7B5C5DEB8CC3D043

DA: Status: OK; Boot Style: OK

USB:
HIGH-SPEED USB is Off
Boot done LEGACY [MTK] 54 sec
Analyze PMT... Fail
PMT: None [0x00] Records: 0
Can't get Partition Table, device looks like erased
Reflash or [MemTool] -> [Init PMT] may helps
Finished 1 min 19 sec
Keep connection

After I try INIT PMT



Try as FIREFLY SMART PHONE will read info OK

Operation: Identify [ v2.63 ]
Wait...
Platform: FireFly SmartPhone - MT6580/67:35|39|52|53|61|65|68|71
Port: Both [ B + P ]; High-Speed: Off
[-] Force BROM
[-] Local SLA
[+] Auto-EMI
[+] FireFly-Over-DA
- Power device Off [remember Test-Point]
- Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek USB Port_V2023 (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
MEID: E75DDCFD8CEF7B4C7B5C5DEB8CC3D043
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0x05 BL: 0xFE [BOOTROM]
FireFly: Init
Start Auth... Ok
Continue Auth... Ok
Start... Ok
Init Core... Ok
FireFly: Running: v06.05.06 on MT6580
EMMC init passed

extcsd stored: C:\InfinityBox\CM2MT2\backup\ext_csd\MT6580__extcsd_0013-Micron_Q3J96R_5.1_2024-08-05.bin
EMMC
CID: 13014E51334A39365210040F4DE4C349 crc Ok
Vendor: Micron OEM: 334 ID: 51334A393652 [Q3J96R] PRV: 0x10
Serial: 68111844 0x040F4DE4
MM/YY: 12/2016
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
USER: 0x3AB400000 [ 14.68 Gb ]

CSD: D07F01328F5913FFFFFFFFEF8640004F
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01

EXTCSD rev1.8 EMMC 5.1 FW: 54
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x58
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x400000 4.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 16 Gb Actual 0x3AB400000 14.68 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 20% - 30% used
EOL_B: MLC status: 0% - 10% used

USB: HIGH-SPEED
HIGH-SPEED USB is Off
Boot done FireFly 24 sec
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 21
Loading... Ok
Probe boot... Ok 3 sec
Patch Level: MRA58K
Display ID: MRA58K test-keys
SW Version: 1664464091
Ver. CodeName: REL
Ver. Release: 6.0
Sec. Patch: 2022-04-05
Build Time: 29-Sep-22 3:25:35 PM
Product Model: Pro_Max14
Product Brand: Apple
Product Name: iPhone
Product Device: iPhone 14 Pro Max
CPU: armeabi-v7a,armeabi
Product Manfct: apple
Board Platform: mt6580
Product Info: hct6580_weg_c_m
SW: iPhone-user 6.0 MRA58K 1664464091 test-keys
Device ID: apple-pro-max14-iphone-14-pro-max
Strategy: [clone|copy]
Firmware ID: MT6580_apple_Pro_Max14_OSv6.0_MRA58K_hct6580_weg_c_m_Apple
Verify firmware [MT6580_apple_Pro_Max14_OSv6.0_MRA58K_hct6580_weg_c_m_Apple]... Firmware is unknown
Please upload https://infinity-box.com/?r=100020

Analyze userdata...
userData: fileSystem [ext4] with FDE [encryptable]
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6580__E75DDCFD8CEF7B4C7B5C5DEB8CC3D043

Analyze modem... Nothing
Analyze nvram...
Reading... Ok
NVRAM: Items: 0x76 Size: 0x029986 State: Ok
WiFi MAC: 000000000000
BT MAC: FE5A4600003D
IMEI[1]: 355407915285496
IMEI[2]: 355407915285504
Reading... Ok
PSN1: N/A
EMMC
CID: 13014E51334A39365210040F4DE4C349 crc Ok
Vendor: Micron OEM: 334 ID: 51334A393652 [Q3J96R] PRV: 0x10
Serial: 68111844 0x040F4DE4
MM/YY: 12/2016
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
USER: 0x3AB400000 [ 14.68 Gb ]

CSD: D07F01328F5913FFFFFFFFEF8640004F
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01

EXTCSD rev1.8 EMMC 5.1 FW: 54
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x58
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x400000 4.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 16 Gb Actual 0x3AB400000 14.68 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 20% - 30% used
EOL_B: MLC status: 0% - 10% used

Analyze preloader...
EMI: MT6752 preloader_b9fa2_f20c_i14pro_e.bin with 7 memory type(s)
1. eMMC DDR3 ID: 150100523858314D42 Samsung R8X1MB RAM: 2.00 Gb
2. eMMC DDR3 ID: 90014A484147346404 Hynix HAG4d RAM: 2.00 Gb
3. eMMC DDR3 ID: 110100303136473730 Toshiba 016G70 RAM: 2.00 Gb
4. eMMC DDR3 ID: 700100454841434541 Kingston EHACEA RAM: 2.00 Gb
5. eMMC DDR3 ID: 13014E51334A393652 Micron Q3J96R RAM: 2.00 Gb
6. eMMC DDR3 ID: 13014E51324A393652 Micron Q2J96R RAM: 2.00 Gb
7. eMMC DDR3 ID: 13014E52314A39364E Micron R1J96N RAM: 2.00 Gb
Preloader exist: C:\InfinityBox\CM2MT2\backup\preloader\preloader_b9fa2_f20c_i14pro_e.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_b9fa2_f20c_i14pro_e.bin [503e1547]... Exist

Probe FRP... Off
Finished 1 min 5 sec
Keep connection

[03C4EA2951]

INITI PMT And Restoring BackUP

Operation: MemoryTool: Memory Read [ v2.63 ]
Wait...
Read 1 partition(s) to C:\InfinityBox\CM2MT2\phdata\
Read [1] partition: PGPT Ok [PGPT.bin]
Finished 9 sec

Operation: MemoryTool: Restore Backup [w/preloader] [ v2.63 ]
Wait...
Write or Erase operation may brick device!
Continue? Yes
Search for MT6580__E75DDCFD8CEF7B4C7B5C5DEB8CC3D043
Backup for connected device Found
Restore it? Yes
Backup selected: C:\InfinityBox\CM2MT2\backup\MT6580__E75DDCFD8CEF7B4C7B5C5DEB8CC3D043.7z
Restore...
Selected: lk nvdata nvram preloader proinfo protect1
Restore: lk Ok
Sparse...
Compression ratio: 88%
Restore: nvdata Ok
Restore: nvram Ok
Restore: preloader
Bootloader code area 0 prepare Ok
Bootloader code area 0 updated
Bootloader code area 1 prepare Ok
Bootloader code area 1 updated Ok
Restore: proinfo Ok
Sparse...
Compression ratio: 93%
Restore: protect1 Ok
Finished 1 min 11 sec

[03C4EA2951]

Operation: Make Service Report [ v2.63 ]
Wait...
Platform: FireFly SmartPhone - MT6580/67:35|39|52|53|61|65|68|71
Port: Both [ B + P ]; High-Speed: Off
[-] Force BROM
[-] Local SLA
[+] Auto-EMI
[+] FireFly-Over-DA
- Power device Off [remember Test-Point]
- Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek USB Port_V2023 (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
MEID: E75DDCFD8CEF7B4C7B5C5DEB8CC3D043
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0x05 BL: 0xFE [BOOTROM]
FireFly: Init
Start Auth... Ok
Continue Auth... Ok
Start... Ok
Init Core... Ok
FireFly: Running: v06.05.06 on MT6580
EMMC init passed

File exist, skip: C:\InfinityBox\CM2MT2\backup\ext_csd\MT6580__extcsd_0013-Micron_Q3J96R_5.1_2024-08-05.bin
EMMC
CID: 13014E51334A39365210040F4DE4C349 crc Ok
Vendor: Micron OEM: 334 ID: 51334A393652 [Q3J96R] PRV: 0x10
Serial: 68111844 0x040F4DE4
MM/YY: 12/2016
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
USER: 0x3AB400000 [ 14.68 Gb ]

CSD: D07F01328F5913FFFFFFFFEF8640004F
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01

EXTCSD rev1.8 EMMC 5.1 FW: 54
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x58
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x400000 4.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 16 Gb Actual 0x3AB400000 14.68 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 20% - 30% used
EOL_B: MLC status: 0% - 10% used

USB: HIGH-SPEED
HIGH-SPEED USB is Off
Boot done FireFly 12 sec
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 21
Building report...
Probe boot... Ok 3 sec
Request config values... Ok Unsupported hardware
Compress: C:\InfinityBox\CM2MT2\phdata\data_export\
Wait...
Verify config values... Ok
Finished 56 sec
Keep connection

[03C4EA2951]

This is my device and full spec

https://specdevice.com/showspec.php?id= ... 87&lang=zh

[03C4EA2951]

THIS IS GENUINE DEVICE INFO BEFORE FLASHING ANY OTHER FIRMWARE

USB: HIGH-SPEED
Boot done FireFly
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 24
Select info source... [recovery] Ok
Patch Level: O11019
Display ID: LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828
SW Version: 1693191851
Ver. CodeName: REL
Ver. Release: 8.1.0
Sec. Patch: 2022-10-05
Build Time: 28-Aug-23 3:03:17 AM
Product Model: i14_Pro
Product Brand: alps
Product Name: full_b9fa2_f20c_i14pro_e
Product Device: b9fa2_f20c_i14pro_e
CPU: armeabi-v7a,armeabi
Product Manfct: alps
Product Info: b9fa2_f20c_i14pro_e
SW: full_b9fa2_f20c_i14pro_e-user 8.1.0 O11019 1693191851 test-keys
Product Board: b9fa2_f20c_i14pro_e
Board Platform: mt6580
Device ID: i14-pro-b9fa2-f20c-i14pro-e-full-b9fa2-f20c-i14pro-e
Strategy: [none|generic]
Firmware ID: MT6580_alps_i14_Pro_OSv8.1.0_LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828_O11019_b9fa2_f20c_i14pro_e
Verify firmware [MT6580_alps_i14_Pro_OSv8.1.0_LYS_F20C_B9FA2_80_i14Pro_3G_B1B2B5_ME2_D2_ZX_HK68576_20230828_O11019_b9fa2_f20c_i14pro_e]...

[Support]

Device can not be damaged with READ process.
if you got a problem after READ you should charge battery and check device hardware.

[03C4EA2951]

i try bbut device dead, after that I try some flashes but still dead, any way to recover this device ?