need this file my set is g five t33+..

[mobileservice]

Code: Select all

COM15 [Serial2] selected
module  v4.04
Device: _Autodetect MT6253 NOR
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[0093]: 0089:890300000000 [INTEL] PF38F30xxM0x1xx
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00000108
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: B001-GFIVE-21_L45_V124
detect NOR info...
number of areas/bytes to read: 1:00050000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.B001-GFIVE-21_L45_V124.BIN_FLNPF38F3040M0Y3DE
project-id: B001-GFIVE-21_L45_V124, 00000000
code offset: 00000000
ffs offset/size [02]: 00C00000/00400000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.4.04, database date: 17.10.2011): 
HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.B001-GFIVE-21_L45_V124.BIN_FLNPF38F3040M0Y3DE

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: mtk@infinity-box.com or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 16Mb
number of areas/bytes to read: 1:01000000
reading (HW_STORAGE_NOR)...
file saved: C:\InfinityBox\MModule\HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.B001-GFIVE-21_L45_V124.BIN_FLNPF38F3040M0Y3DE__fullflash_20111107-165241.B0M.bin
Format...
autodetection mode...
Format done
Disconnect...
done
Finished, time used: 27 min 41 sec
Remove/Install battery now !

my set is after format restart so give me this file or give me any idea

[InfinityHelp]

hello!

as you can see, there was automatic eeprom backup created:
HEXING53_09A_GEMINI_PCB01_GPRS_MT6253_S00.B001-GFIVE-21_L45_V124.BIN_FLNPF38F3040M0Y3DE__fullflash_20111107-165241.B0M.bin

please load it as "eeprom" (flash tab) and write back to phone.
phone will be restored to original state