MediaTek Helio G99

[Gargoyle]

Of course I understand that, I just have a dilemma now
whether to wait to see if there will be support for the G99,
if there will be at all, or just return the "Infinix 12 Pro" device, I have this option until the end of next week.

[Gargoyle]

Have a nice day,
Reading and writing the firmware takes place without any problems, but ... if I perform a Factory Reset: Wipe, the device no longer boots, it reboots cyclically, only flashing the firmware helps.

Unlocking bootloader not working:

Operation: Bootloader unlock [ v2.39a5 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM4)
MODE: BOOTROM; PORT: 4
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6789 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x1208
CODE: Lagrange_P
TYPE: NEXTGEN [LUCIPHER]
MEID: EA37CD1069C188825CB65C5AA7413BB3
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE [BOOTROM]
BROM: SOCID: 895174471903F669BD97A1CAB22312CADE4982D6247555420B1577AF2E935F8E
BROM: SLA: Sending Auth
BROM: SLA: Auth accepted
BROM: SLA: CHALLENGE not used
AGENT: Infinix: Infinix-X676B | Manual: Off
[0bdd0341] C:\InfinityBox\CM2MT2\boot\Infinix\Infinix-G99-General\DA_BR.bin
[f835e4ca] C:\InfinityBox\CM2MT2\boot\Infinix\Infinix-G99-General\auth_sv5.auth
Looking for suitable BootChain in DA...
Found MT6789
AGENT: MTK_DOWNLOAD_AGENT
AGENT: ID6 : MEMORY : H9HQ15AFAMBDAR [ 8.00 GB ]
AGENT: ID6 : MEMORY : KM2P9001CM-B518 [ 6.00 GB ]
AGENT: ID6 : MEMORY : KM8F9001JM-B813 [ 8.00 GB ]
AGENT: ID6 : MEMORY : H9QT1G6DN6X132 [ 8.00 GB ]
AGENT: ID6 : MEMORY : H9QT0G6CN6X146 [ 8.00 GB ]
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started

LC : Agent online!
LC : Agent ENV tuned succesfully

Version : 1.2
DevRND : FF084737D59D71F775C89E9728D26CD5
Battery : 4107 mV
RAM Size : 0x00000000 [ 0 B ]
Storage : UFS
ID : KM8F9001JM-B813
BLK : 0x00001000
LUN0 : 0x0000000000400000 [ 4.00 MB ]
LUN1 : 0x0000000000400000 [ 4.00 MB ]
LUN2 : 0x0000003B96000000 [ 238.34 GB ]
LUN3 : 0x0000000000000000 [ 0 B ]

LC : Hardware not initialized yet! Process HWinit
LC : Hardware initialized successfully!
LC : HostCapps set OK!
LC : HostInfo set OK!

Version : 1.2
DevRND : FF084737D59D71F775C89E9728D26CD5
Battery : 4108 mV
RAM Size : 0x200000000 [ 8.00 GB ]
Storage : UFS
ID : KM8F9001JM-B813
BLK : 0x00001000
LUN0 : 0x0000000000400000 [ 4.00 MB ]
LUN1 : 0x0000000000400000 [ 4.00 MB ]
LUN2 : 0x0000003B96000000 [ 238.34 GB ]
LUN3 : 0x0000000000000000 [ 0 B ]

LC : Boot to 2nd Agent
LC2 : Entered 2nd Agent!
LC2 : Process HWinit
LC2 : Hardware initialized successfully!

LC2 : SLA request by agent!
SLA: RND[0]: A4C8C380A4C8C380A4C8C380A4C8C380
SLA: RND[1]: 585ECD286CB301CA142C79BFC657992B
SLA: RND[2]: 3965613439613732663963316563633464396564303631636234356437383466
Connect
Authentication
Check version
Process
Received: 0x100
LC2 : SLA : Challenge Pass!

LC2 : Agent : v2021 from : Sep 23 2022:03:45:17

CHIP: MT6789 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x1208
CODE: Lagrange_P
TYPE: NEXTGEN [LUCIPHER]
MEID: EA37CD1069C188825CB65C5AA7413BB3

DA: USB: HIGH-SPEED
Boot done [2]

Reading...
Ok
Info: Device is not supported or wrong operation mode selected
Wrong Platform selected for operation
Set Platform -> Infinity FireFly SmartPhone - MT67xx, MT65xx | Helio G/P
Reconnect Power/Cable now