Page 25 of 32

Re: Software Updates and News

Posted: 20 May 2020, 13:59
by Support
Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features

As ordinary, unique functions and methods released

Core
NewChip : SC7731E with NAND ( KaiOS and MocorDroid5 )
NewChip : SC7715x with NAND ( KaiOS , MocorDroid5 , Android 4x)
NewChip : SC9820x with NAND ( MocorDroid5 , Android 4x)
Protocol : Speed increased for most operations ( SPD and UniSOC )
Protocol : Protocol changes according SPD/UniSOC R23 line

New Feature : NAND support ( SPD and UniSOC generation )
!* Support flashing Factory / InfinityFW
!* Support correct flash selection and servicing phones with NAND
!* Support InfinityFW reading ( Complete, Factory-Like )
!* Support Service operations

Service
Changed : Repair security procedure updated (Flash and Diag mode)
Changed : Identify procedure updated
!* Support complete and fast NAND devices identification
!* Support complete simlock info structure identify and verify
!* Support multi-nv structure detection and security info detection
!* Database update / self-learning updated
!* FileSystem identification support UBIFS and F2FS detection
Changed : Format FS / Reset FRP procedure updated

Firmware Reader
New Feature : NAND support
!* Support old and new generations ( SPD and UniSOC )
!* Support plain Android , KaiOs and MocorDroid5 OS
!* Automatic and correct FileSystem creation for NAND devices
!* Support all security types, include UniSoc secure/signed
!* Produced FW is 100% like factory one
Changed : FileSystem creation engine updated ( UBIFS support , bugfixes )
Changed : Improved structure identification
Changed : Support more different types
Changed : Old SPD line support rebuild ( SC7715,SC7731,SC983x,SC9820x )
Changed : Fixed FW creation in full manual / skip verify mode settings

Flasher
New Feature : Complete flash erase ( whole flash format ) during flashing ( eMMC / NAND )
New Feature : Correct NAND flashing support ( SPD and UniSOC ) ( Factory PAC and InfinityFW )
Changed : Flashing core for InfinityFW more stable

Loader Database
NewChip : SC7715 BASE NAND revisions included
NewChip : SC9820 BASE NAND revisions included
NewChip : SC7731E BASE NAND revisions included
NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices )
NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices )

Other
Changed : Manual mode : automatic structure and setting detection in manual mode
Changed : Automatic base settings selection for BASE loaders ( Protocol, Charging, FlashSettings )
Changed : Separate NAND mode option activated in platform settings for manual mode
BugFix : Lot of minor changes and bugfixes
Changed : Software compatibility with other applications improved

Re: Software Updates and News

Posted: 20 May 2020, 14:00
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.10 - New MTK chips and UFS storage

As ordinary, unique functions and methods released

Core
NewChip: Helio G90T (Formely MT6785) supported (UFS / eMMC)
NewChip: MT6731 supported (eMMC / NAND)
NewChip: Helio A20 (Formely MT6761 low-cost revision) supported
NewChip: Helio P90 (Formely MT6779) support under test (UFS / eMMC)
BugFix : MT6595/MT6597 BROM support broken, fixed (Agent 17xx-19xx)

New Feature : UFS FlashIC support
!* Support flashing Factory / Infinity FW
!* Support MemoryTool
!* Support Factory Firmware reading
!* Support Service operations
!* SOC's on market, support UFS chips right now : G90, P70, P90

Service
Changed : Repair security procedure updated (Flash and Meta mode)
Changed : SPUnlock procedure updated (Flash and Meta mode)
Changed : Identify procedure updated
Changed : Format FS / Reset FRP now support UFS flash too
New Feature : Modem Re-Init (NVfix)
!* Useful after FixBB, in case of modem subsystem alive

Firmware Reader
New Feature : UFS flash support
New Feature : Combo scatter creation for newest chipset
!* Produced scatter MAY NOT work with OLDER SPFT (factory flasher) below 19xx versions!
!* Produced scatter is 100% like factory ones
Changed : Improved structure identification
Changed : Support more different types
Changed : NAND support revised
Changed : LEGACY line support revised
Changed : Platform and version depend scatter creation for better compatibility with SPFT
Changed : LEGACY line with Android 9 (MT6580 and similar) specific changes

MemoryTool
New Feature : UFS flash support
!* Support Read , Write , Erase partitions
!* Support RePartition
!* Support Preloader init
!* Support Change Work mode (ADR / PRT)
!* Change storage settings useless, all flash content mapped in single mode
Changed : Structure identification
Changed : Automatic files selection at folder change

Flasher
New Feature : Support COMBO scatter's (v2.xxx)
!* Automatic selection depend on device Flash (UFS/EMMC/NAND)
!* Storage selection done automatic according detected, for end-user all selection and rest settings remain same as before
New Feature : Support MTK chips with UFS FlashIC flashing
!* All features (Erase / Verify / PMT upgrade / Backup / HW Compatibility) work for devices with UFS as well
Changed : Scatter tab changes, specific to multi-storage selection and settings

Meta protocol functions updated
Changed : Updated security detection feature
BugFix : Updated structure verification

Other
BugFix : A lot of minor changes and bugfixes applied
Changed: Many internal changes to improve compatibility with other applications, antiviruses and similar software.
Changed: Software load/operation speed improvements implemented

Re: Software Updates and News

Posted: 25 May 2020, 05:43
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.11 - New features activated

Core
BugFix : META protocol updated
Changed : Loader v2012 supported and tested

Service
Changed : Identify in META now read NVRAM dump that is compatible with flash mode writing
!*Feature may not work on old devices - Android 4.x, MT6572 and similar legacy chips
!*Feature useful also for devices which can not connect via flash mode as security save way

Changed : Identify now also verify EXTRA security flags
!*Signed types detection ( RSA signed security items )
!*Encrypted types detection ( Vendor-modified security items )
!*Edit/Repair security on those types IS NOT possible at the moment !
!*Swap security on those types IS NOT possible at the moment !

New Feature : Google Attestation key installation
!*Allow upload attestation keys to devices which require it ( Google Key red mark in phone after complete boot )
!*In most cases it model-depend file!
!*SW DO NOT allow select wrong file ( non attestation-key file ) by verify content of file
!*Files in most cases delivered with factory fw package ( kb.bin , Android_Key and other similar )

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types

Flasher
Changed : File selection optimized for latest build revisions - multi-bundle etc.

MemoryTool
Changed : Init PMT procedure updated (NAND, EMMC, UFS)
Changed : Init Preloader procedure updated (NAND, EMMC, UFS)

Other
BugFix : Minor changes and bugfixes
BugFix : Compatiblity issues fixes

Re: Software Updates and News

Posted: 18 Jun 2020, 10:01
by Support
Infinity Chinese Miracle-2 RKT/Rockchip v2.02 - New chips and latest Android support

As ordinary, unique functions and methods released

Core
BugFix : Connection stack updated
BugFix : Compatibility with latest drivers releases
Changed : Core rebuild for support modern SoC's and old SoC's revisions with Fuse/SecureBoot support

Support RK29xx series ( NAND )
Support RK30xx series ( NAND, eMMC )
Support RK31xx series ( NAND, eMMC )
Support RK32xx series ( NAND, eMMC )
Support RK33xx series ( NAND, eMMC )
Support RKPX5 series ( NAND, eMMC )

Service
Changed : Identify procedure rebuild. Complete info reading and parameters detection
!*If Identify CAN NOT display SWVersion details it may means device can not be serviced for FWRead operations
Changed : FRP reset revised to support latest Android versions and Modern SoCs
Changed : FS format revised to support latest Android versions and Modern SoCs

Firmware flasher
New Feature : Modern RK UnionImage flashing supported
New Feature : Combined Sparse image flashing supported
New Feature : Repartition for RK-PARA and RK-GPT supported
New Feature : Factory (UnionImage) Firmware flashing for latest Rockchip SoCs versions/revisions
Changed : Support Infinity Firmware Flashing ( Old and Modern SoCs revisions )

Firmware Reader
New Feature : Android 7 devices supported
New Feature : Android 8 devices supported
New Feature : Android 9 devices supported
Unique : Firmware read allow read FW from "unreadable" Android 8/9 devices
!*Feature support eMMC and NAND devices which can not be dumped by any tools over native protocol ( No Root / ADB need )
!*Feature support some "slow" NAND cases on modern SoC's
!*Feature may not work on some NAND devices with FTL/ECC errors and Flash Faults
Changed : Improved structure identification
Changed : Support more different types

Other
BugFix : Minor changes and bugfixes
Drivers : New driver package with Win8/Win10 x86/x84 are at support area
Info : SW may work not correct in some cases with RK29xx and RK31xx OLD NAND 4.x devices
Info : New driver installation is REQUIRED for correct work !

Re: Software Updates and News

Posted: 01 Jul 2020, 11:04
by Support
Infinity Data Explorer v1.08 - Search Engine updated, SPD improvements and more

Data extraction based on full reconstruction of file system

- SPRD engine rebuilded
- contacts save method updated
- long SMS parse method updated
- HTML export released (via templates)
- gui: log autoclear option before new operation
- gui: pop-up menus for log (clear and save options)
- folder with date/time creation for Converter
- Minor bugs fixed

https://www.infinity-box.com/news/?r=4004

Re: Software Updates and News

Posted: 01 Jul 2020, 11:05
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.12 - F2FS support, EncryptInfo and more

As ordinary, unique functions and methods released

Core
BugFix : Some legacy chips support may broken, fixed (Agent 19xx-20xx)
BugFix : BROM mode support fixed for MT6752/MT6753

Service
Changed : Identify procedure updated, read more useful info on Android 10 devices
!* From now on for modern Android ( 7 - 10 ) shown more detailed UserData state with encryption methods
!* That replace old ENCRYPTED/PLAIN states to avoid false-positive results for forensic cases
!* It may work not stable on earlier Android releases, it is recommend to check state also via MemoryTool if required
New Feature : Smart Reset ( Format FS option )
!* Support RAPHAEL line in SMART mode, not need change any options
!* Function detect correct settings automatically to avoid user from mistakes
!* Function detect correct file systems, include modern F2FS, and all variants of EXT filesystem to support wide range of old and modern devices
!* Function detect and reset all settings, include FRP and Privacy Locks ( for USER DATA SAFE methods - USE SEPARATE OPTION!!!!! )
Changed : META : Attestation Keys download procedure updated

Firmware Reader
New Feature : F2FS file system detection and creation supported
Changed : Improved structure identification
Changed : Support more different types
Changed : Combo scatter creation revised
Changed : Platform and version depend scatter creation for better compatibility with SPFT
Changed : Android version-depend additional data creation

MemoryTool
Changed : Structure identification
New Feature : Build FILE SYSTEM at selected partitions
!* Allow make F2FS, EXT4 old and EXT4 modern variant of filesystem at selected partition
!* Select need partition ( for prevent mistakes - just one partition per operation allowed ) and desired filesystem
!* Useful also in case of unlocked devices with change FS or encryption method needs

Flasher
New Feature : Android 10 specific changes on verification and file selection
Changed : Selection order modified according last changes of build SDK's and vendor-specific cases
Changed : Scatter tab changes, specific to multi-storage selection and settings

Model DB
Changed : New agents included for Tecno, Infinix, Itel, Panasonic, Walton brands ( with different SoC lines in every )

Other
BugFix : Minor changes and fixes


https://www.infinity-box.com/news/?r=4009

Re: Software Updates and News

Posted: 14 Jul 2020, 18:37
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.13 - Android 10 and new SoC types

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MediaTek MT8765 supported
NewChip : MediaTek MT8766 supported
NewChip : MediaTek Helio G70 supported
NewChip : MediaTek Helio G80 supported

Service
Changed : Identify
!* More accurate FS state detection
!* Support for different "customized" devices identify - Huawei and similar
!* Support for A/B structure devices for read complete info - Nokia, Doogee, Infinix and similar
!* Support GSI/Trebble devices for read complete info
!* Android 5/6 devices fixes

Changed : Smart Reset
!* Optimized support for Android 5, 6, 10
!* Optimized support for "customized" cases - Oppo, Vivo, Huawei and similar
!* Optimized work with GSI/Trebble/A/B devices

Firmware Reader
New Feature : Android 10 supported!
!* Read FW result is completely factory-like
BugFix : Work with big partitions ( more than 4 GB )
Changed : Logical FileSystems sparsing supported
Cahnged : More intellegent identify of unknown layouts
Changed : Improved structure identification
Changed : Support more different types
Changed : Android version-depend additional data creation

Model DB
Changed : New agents included for Xiaomi devices ( G70/G80/Dimensity )

Other
BugFix : Minor changes and fixes
GUI : Store last used FormatMode enabled

Thanks to : kamal_singla, gracy_elec and all other friends !

https://www.infinity-box.com/news/?r=4012

Re: Software Updates and News

Posted: 29 Jul 2020, 18:20
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.14 released - UltraFlashing activated !

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MediaTek Dimensity line ( MT68xx ) support under test

Flasher
New Feature : UltraFlash - UNIQUE FEATURE !
!* ALLOW IGNORE MOST EXISTING SECURITY/FUSE/DA RESTRICTIONS and forcedly flash protected regions
!* Feature support Whole RAPHAEL line from MT6731 to MT6785. Vendor and security settings configuration in most cases is not important.
!* FEATURE CAN FLASH ANYTHING SIGNED/UNSIGNED TO PROTECTED AND/OR VERIFIED REGIONS
!* Tested with Huawei, Vivo, Infinix, Tecno "protected" and other models
!* Feature may not work in some "exotic" secure/da/fuse configurations and cases!
!* Feature not work with "remote authentificated" devices yet!

Service
Changed : Reset PrivacyLock updated
!* Action selection now depend on different factors ( Android 6, 9 issues fixes )
Changed : Smart Reset
!* Optimized support for Android 5, 6
!* Optimized support for "customized" cases

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types

Model DB
Changed : New agents included for Tecno, Infinix devices devices ( G70/G80/G90 )

Other
BugFix : Minor changes and fixes

https://www.infinity-box.com/news/?r=4015

Re: Software Updates and News

Posted: 05 Aug 2020, 14:13
by Support
Infinity Pinout database v2.00 released

Information about boot keys, pinouts, test-points, hardware updated

NOTE:
- pinout v2.00 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted

https://www.infinity-box.com/news/?r=4018

Re: Software Updates and News

Posted: 11 Aug 2020, 16:21
by Support
Infinity Shell v2.00 released

This software helps you to select software module that is suitable for your phone model.

- user interface changes
- server communication process updated
- software update downloading method updated
- product news downloading method updated
- models database update method improved
- many internal changes

https://www.infinity-box.com/news/?r=4019

Re: Software Updates and News

Posted: 24 Aug 2020, 08:18
by Support
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash

As ordinary, unique functions and methods released

Core
Changed : FlashCore Protocol updated
Changed : DiagCore Protocol updated
Changed : NAND protocol adaptation
Changed : Operations speed increased

Flasher
Changed : Flash Engine updated
Changed : Handling for 64bit files optimized
Changed : Activated FastFlash V1 protocol *
Changed : Activated FastFlash V2 protocol *
!* FastFlash protocol allow increase flashing speed for big unsparsed images
!* FastFlash protocol reduce flashing time up to 4-6 times, depend on device configuration - 3-4 minutes against 20-25
!* FastFlash activated automatically, if can be performed
!* GOOD USB cable and GOOD USB port must be used - do not use USB HUBs !
Changed : Support for new PAC formats activated: v2.x.x line

Service
Changed : Identify scheme : Read more accurate and complete info *
!* Include modern Android 9 and Android 10 devices
Changed : Precise FileSystem settings detection ( Type and Encryption algo )
Changed : Better security detection
Changed : Format FS / Reset settings updated

Firmware Reader
Changed : Reading speed up to 30% faster ! *
!* Test feature, support modern UniSoc devices: SC7731E, SC9832E, SC9863
!* Test feature, only RS-featured loaders supported !
Changed : Android 10 support activated! *
!* Support latest Android 9 and modern Android 10 devices from now!
!* Allow read complete firmware image from Android 10 devices without loss any ota/vendor abilities
Changed : X64 devices/loaders native support activated for complete reading
Changed : SW now create Android-version depend images for better compatibility
Changed : SW now create correct FileSystems bundle according device settings *
!* Almost reducing "hang" case after flashing
Changed : Improved structure identification
Changed : Support more different types
Changed : Structure identification and NAND reader more stable now (complete E-series NAND adaptation is on the way)

Model DB
Changed : New loaders included for various set of devices
Changed : New Generic loaders included and updated existing ones

Other
Changed : Removed outdated options from platform tab, many options changed to atomatic mode
BugFix : Minor changes and fixes

Info :
Android 10 enabled devices : SC7731E, SC9832E, SC9863
FastFlash enabled devices : SC9832E, SC9863

https://www.infinity-box.com/news/?r=4020

Re: Software Updates and News

Posted: 24 Aug 2020, 08:18
by Support
Infinity Chinese Miracle-2 MTK/Mediatek v2.15 - New models and features

As ordinary, unique functions and methods released

Core
Changed : Loader v2028 supported and tested ( v2020 skipped, unstable )
Changed : Protocol updated ( Raphael/Legacy )
NewChip : MT8167 supported ( AutoBoot, SelfLearn supported )
BugFix : MT8163 support should be fixed

Flasher
Changed : UltraFlash - UNIQUE FEATURE !
Changed : UltraFlash : It is possible to fix Almost all SECURITY-related (PUBKEY etc. verify/missmatch) errors ( Mostly when wrong DA used on EFUSED models )
!* Feature may not work for some "exotic" secure/da/fuse configurations and cases !
!* Feature not work with "remote authentificated" devices yet !

Service
Changed : Identify
!* Better AndroidInfo extraction, activated check and filter of similar fields
!* It is possible to read more different info about device, if possible ( can be activated from settings )
Changed : Smart Reset
!* Optimized support for different customized and generic cases

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types
Changed : More careful checking of vendor, security and ota-specific data
Changed : DevInfo ( FWname ) creation optimized
Changed : Slow devices reading revised ( MT8167, MT6570, MT6580 and similar )
!* It is strongly recommend to enable autoupdate or use latest MT2 version to service latest Android 9/10 phones/tablets !

MemoryTool
Changed : Bugfixes and optimizations

Model DB
Changed : New agents included for various set of devices ( Alcatel, Moto, Acer, Generic )
Changed : DB revision done, some issues fixes

Other
BugFix : Many minor changes and fixes

https://www.infinity-box.com/news/?r=4021

Re: Software Updates and News

Posted: 04 Sep 2020, 10:56
by Support
Infinity Data Explorer v1.09 - MTK, SPD, RDA updated and more improvements

Data extraction based on full reconstruction of file system

- MTK module improved - more device supported
- SPD module updated - SPD66x0 support released
- RDA module updated - more Code pages supported
- GUI updated and improved
- Minor bugs fixed

https://www.infinity-box.com/news/?r=4023

Re: Software Updates and News

Posted: 04 Sep 2020, 13:09
by Support
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features activated

As ordinary, unique functions and methods released

Core
Changed : FlashCore Protocol updated
BugFix : SC9832E line support updated
BugFix : SC9820E line support updated
BugFix : SC9863x line support updated
NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
Changed : All service features speed under FlashMode increased

Flasher
Changed : Flash Engine updated
Changed : FastFlash protocol updated

Service
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices

Firmware Reader
Changed : Complete FWReader rebuild to cover most count of different devices, existing on market *
!* Almost all Flashing issues has been fixed, FWRead repeat required for problematic cases/models!
Changed : UltraReading option activated ! *
!* Now reading of UniSoc devices 3-5 times faster, than before
- approx 20 mins instead of 70 for SC9853i (2.2 GiB) comparing to older releases
- approx 12 mins instead of 40 for SC9832E (2.5 GiB) comparing to older releases
- approx 20 mins instead of 60 for SC9863 (4.4 GiB) comparing to older releases
- approx 15 mins instead of 50 for SC7731 (1.5 GiB) comparing to older releases
!* Most generic loaders now support FastReading ( RS,SS,0S,1S,2S )
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !
Changed : Improved structure identification
Changed : Support more different types
Changed : Android 10 devices support improved

Model DB
Changed : New Generic loaders included and updated existing ones
Changed : SC9820E(eMMC), SC9832E, SC9863x loaders updated

Other
BugFix : Minor changes and fixes
Changed : Power Reset/Switch off scenario operation-depend now
Option : GUI ( File -> GUI ) : Allow select other interface mode*
!* Default interface - standard V2 line GUI
!* Wide interface - best for big screen / big distance to monitor
!* Wide log - extend log window to screen size - optimal for most cases

https://www.infinity-box.com/news/?r=4024

Re: Software Updates and News

Posted: 13 Oct 2020, 11:18
by Support
Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
BugFix : MT6737M/MT6580
Changed : Internal EMI engine rebuild
!* LEGACY line : DB rebuild and updated, changed and optimized selection features
!* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic.
Summary :
!* Supported almost all existing memory/dram combinations up to current date for LEGACY lines
!* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line )
!* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto.
!* In rare case of discrette DRAM may require change EMI once for some specific devices
!* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation
!* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work!

Flasher
Changed : Core updated for LEGACY line
BugFix : MT6737 with Android 10 flashing revised
BugFix : Checksum verify rebuild
BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs )
BugFix : Different scatter-version dependencies handled now correct
Changed : Core updated for RAPHAEL line
Changed : UltraFlash feature updated, new security workarounds supported

Service
Changed : Identify
!* Legacy platform changes, mostly for Android 10 devices
Changed : Smart Reset
!* Optimized support for different customized and generic cases

NewFeature : HW Report ( RAPHAEL - only )

!* Allow read extended info from device about its HW
- EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes
- CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents, even on same SoC!


Firmware Reader
Changed : LEGACY line support updated ( Android 10 line )
Changed : Support more different types
Changed : FileSystem tools updated. Issues with reading on some systems should be fixed.
Changed : More wide range of scatter versions creation according device specific data

Other
BugFix : Lot of minor changes and fixes
Option : GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases

Info
!* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues
- FOTA issues
- Attestation Key Issues
- Tee Key issues
- Security issues

https://www.infinity-box.com/news/?r=4034