Software Updates and News

Post Reply
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

iosFileUploader v1.09 released
- internal improvements, upload engine updated

https://www.infinity-box.com/support/?r=100020
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
UniSoc: SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G:

Updated LOD tools ( Factory LOD support revised )
UserCode reading improved

Spreadtrum/UniSoc SC6530/6531/A/C/D/E:

New feature activated: Complete identification
During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )
Readout naming changed to DeviceInfo details instead of flash size/flash vendor

Repair security revised
Database revised, loaders updated ( extended range of supported SC6531EFM devices with 4-8MB flash )

Spreadtrum/UniSoc other:
Protocol updated, error codes handling activated
SC6531 with 16MB flash support revised
FTM during flashing now make DNVM clean, FS clean and structure verification
UserCode reading improved
Some other bugfixes and small changes

Info:
"HardLock" detection feature for SP-locked device activated under test

https://www.infinity-box.com/support/?r=100086
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features

- Core
Protocol updated
Error handling, error explanation and hint module activated
SC9850 and similar devices WRITEFLASH security disable option enabled
> Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error)

- Android 9 line devices tested and supported for Firmware reading!
- Self-Learning mode for Firmware Reader activated!
That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware
Just follow the SW instructions if need and you don't need to wait updates for latest devices

- Service
Security - NVM reading feature activated
> Allow read complete device factory calibration data, security items
> Save also modem info for cross-writing NV between different models
Security - NVM writing feature activated
> Allow restore / rewrite device factory calibration data, security items
> Allow use different modes during restore:
> 1. SWAP ( safe mode ) - if security alive SW will try swap security data
> 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone
Identify - better structure detection
Identify - BaseBand deep identification
> Allow read complete BaseBand info and read "MODEM TAG"
> Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG
> TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG
UserData - PrivacyLock read feature activated
> Allow read PRIVACY lock password and details
> Support DIFFERENT models made by OEM "TRANSSION"

- Flasher
Optimized speed ( from 5% to 15% for UniSoc line )
Optimized PAC handling
Optimized older device line support ( SC7731GEA and similar from SPRD )
NVManager updated - Identify, Backup, Security swap, Verification
Activated new option - Re-Sparse.
> Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices
> Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing

- Firmware Reader
Android 9 line support finished, completely tested and confirmead as working
Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now
> FOTA, vendor-specific features and rest stuff has been tested

- Database:
New generic boots included for SC7731C/G
New generic boots included for SC9863
ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others

- Other
Bug fixes and some changes according users requests

- Known issues :
[1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD.
[2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line.
We are checking that issue and collecting samples. According to users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD
[5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading

https://www.infinity-box.com/support/?r=100087
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity-Box [BEST] NK2 v1.19 - New models and features

HMD Nk 105 (2019) King
Nk 105 - TA-1174, TA-1203
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode

HMD Nk 110 (2019)
Nk 110 - TA-1192
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode

HMD Nk 6.2 Starlord
Nk 6.2 - TA-1187, TA-1198, TA-1200, TA-1201
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

HMD Nk 7.2 Daredevil
Nk 7.2 - TA-1178, TA-1181, TA-1193, TA-1196
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- BL
Fixed Nk 2.2 flashing, Format FS, Reset FRP

- MTK SP
Updated loader database
MT6761 support activated ( Nk 2.2 line ) in standalone mode

- MTK FP
FlashEngine updated
FileSystem (Forensic) engine updated

- SPD FP
FlashEngine updated
Nk 105, Nk 110 support activated ( partial )

- Support
New firmwares for supported models can be found at support area

https://www.infinity-box.com/support/?r=100088
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity-Box Data Explorer v1.00 - Initial Release

- Data extraction based on full reconstruction of file system

- Initial features
1. Phonebook records extraction from dump
2. Phonebook records export to TXT, VCF formats
3. Memory type auto detection (Manual selection also supported)
4. File system parameters (sector size, header type) auto detection (Manual selection also supported)

- Supported devices:
MTK with NOR flash types, in most cases based on CPU types like MT625x, MT626x, and some MT622x
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

- Core
Protocol updated
Error handling, error explanation and hint module updated

- Service
NVM operations revized
DiagMode option activated ( Platform -> Control -> DiagMode )
> Change SW mode to diag, instead of flash. Do not require BootSelection.
Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !

New Identify option - device Platform, Device HW details identification
> Allow detect device SOC family, RAM amount for faster loader selection
> Work in DiagMode, Work ON MODERN and UNISOC chipset only !

- Flasher
Optimized flashing protocol
Optimized older device line support
NVManager updated - Identify, Backup, Security swap
NVManager Recovery tool updated

- Firmware Reader
Optimized structure identification
Activated "forced" reading. Option skip data verification.
> In case of semi-damaged devices, if backup atleast of something required
> In case of "Critical data damaged" errors
Optimized data verification during create FW

- Database:
SC983xx generic loader DB updated
SC9853i generic loader DB updated
SC7731E generic loader DB updated
SC7731x generic loader DB updated
SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
SC7731c/g loaders DB updated - various models and RAM size
SC9832E loaders DB updated - Meizu, Wiko
Some other various models with specific hw settings included in loader DB

- Other
Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
Bug fixes and changes according users requests

- Special thanks to respected Mr. gracy_elec

https://www.infinity-box.com/support/?r=100090
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.01 - new features and improvements

Data extraction based on full reconstruction of file system

- NAND flash types are partially supported
- Additional information extraction supported such as IMEI(s), User Code
- More contacts types are supported
- Open folder with result file(s) after finish: option can be enabled in `Settings` page
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Shell v1.52 released

- models database updated
- models database update procedure improved
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.02 - more devices and CPU types supported

Data extraction based on full reconstruction of file system

- MTK module updated: more device supported
- SPD based firmware images are supported (spd6530 - spd6531 cpu)
- Show Additional info (IMEIs, User Code) for SPD based firmware images
- Contacts save procedure improved
- GUI improvements
- Analyze engine improvements
- Minor bugs fixed
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 MTK/Mediatek v2.07 - New models and features

Core:
NewSOC : MT6785 support under test
NewSOC : MT6885 support under test
Changed : Protocol updated for RAPHAEL line
Changed : Protocol updated for LEGACY line
BugFix : MT6752 support fixed
BugFix : MT8172/MT8173/MT8176 BROM support fixed
BugFix : MT6570 support fixed
Changed : EMI engine revised
Changed : AutomaticBoot selection revised. More types and combinations are supported.
Changed : Loader v1924 supported and tested
Changed : Loader v1936 supported and tested
Changed : Loader v1944 supported and tested

Flasher :
New feature: unmerged signature support
- Files with external signatures now flash correctly
New feature: Forced mode for Raphael line
- Allow automatically skip repartition, erase operations if it was not allowed without break flashing
New feature: WHOLE Flash Pre-Erase
- Erase whole USER region. Destroy ALL data include unique and secure one! Support both Modern and Legacy lines.
Changed: Repartition procedure rebuild to support modern devices and special cases (user memory issues and other fixes)
New feature: Smart erase
- In manual mode selection and enabled pre-erase all unchecked partitions will not be touched
- Storage boundary checks now works correct on legacy and modern lines

Firmware Reader / Maker:
Changed: Local DB updated to latest version
Changed: Scatter creation support latest platforms and variants
Changed: Scatter compatibility with SPFT optimized ( for DL only mode )
New feature: FileSystem creation and params now generated according Android version
New feature: Ability to skip "critical" partitions verification during read ( bl-unlocked devices and specific cases )

MemoryTool:
New feature: Switch working mode ( ADR - PRT options in global settings ) without tool restart (no need to exit and run software again)
New feature: Error ignoring on RAPHAEL line devices. Errors are not triggers shutdown anymore.
Changed: Update PMT operation rebuild. Support modern devices and use multiple factors now.
Changed: Init preloader operation. Support plain preloader dumps that was created by MemoryTool.
Changed: Partition listing style on LEGACY devices. In case of protected regions do not triggered shutdown anymore.
Changed: Write operation now handle correctly some sparse images used in Android 9 and newer versions

Service:
BugFix: Format FS procedure updated
BugFix: Reset FRP procedure updated
BugFix: Identify procedure updated and revised
New feature: eMMC life counter check during Identify
- Show, if possible by Agent or HW, storage life status. LifeCycleEnd(ReadOnly), LifeCycleNearEnd states.
- Support only Raphael newer than MT6739. Support NAND devices as well ( MT6570 )

UserData:
New feature: Reset Privacy Locks
- Support old and modern devices. Procedure is USERDATA SAFE if that required

LoaderDatabase:
Base Loader v1924 included
Base Loader v1936 included
Base Loader v1944 included
New TECNO sec agents included
New VIVO sec agents included
New ALCATEL sec agents included
New Hisense sec agents included
New Moto sec agents included
New Huawei sec agents included
New Lenovo agents included
And other different and generic models can be found in list

Other:
Changed: Base DB revised, unused and "buggy" types removed from BASE agents.
- Change settings if DA version not contain your device platform
Changed: EMIDb updated, more types supported
Changed: Preloader parser now shows more complete memory details

Thanks to:
Special thanks to respected Mr. gracy_elec
Special thanks to respected Mr. Kamal_singla
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.03 - RDA based firmware images are supported and more

Data extraction based on full reconstruction of file system

- MTK module improvements
- RDA based firmware images are supported
- Show Additional info (IMEIs, User Code) for RDA based firmware images
- GUI improvements
- Minor bugs fixed
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity-Box [BEST] NK2 v1.20 - 220.4G, 2.3 and more !

HMD Nk 220 4G (2019)
Nk 220 4G - TA-1148, TA-1155, TA-1171
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode
- Backup security

HMD Nk 2.3 Ironman
Nk 2.3 - TA-1206, TA-1209, TA-1211, TA-1214
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- MTK SP
Flash Engine updated
Updated loader database
Nk 2.3 support activated in standalone mode

- SPD FP
SVC engine updated
Nk 220 4G support activated ( partial )
UserCode reading revised
Identify revised

- Support
New firmwares for supported models can be found at support area
New drivers for 105/110/220 can be found at support area
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 and more

- Support for PACv2 format activated
- Core updated
- Protocol updated
- SC9820E support activated ( Generic and Secure types )

- Repair security option activated
Allow repair device security items on generic devices
Work in Flash mode
Work in DiagChan mode
SimLock-enabled devices may NOT work
Security-enabled devices will NOT work

- Firmware Flasher updated
Updated core
Updated PAC types support
Revised NVManager

- Firmware Reader updated
More accurate data verification
Reading speed optimized for some UniSoc models
Android version-depend mode activated ( allow avoid flashing issues on android 9 and newer )
KaiOS devices supported ( SC7731E eMMC, SC9820E eMMC tested and working ) now for Read Firmware

- Identify procedure revised
Now it also support for security verification ( signed NV )
Better FS state verification
More usable build props info extraction

- Revised manual mode selection and possible combinations ( can combine firmware and loader from any source )

- Loader database
SC7715 eMMC loaders included
SC9820 loaders updated
SC9863 loaders updated
SC9820E eMMC loaders included
Various range of models from Wiko, LYF, BLU, BQ, Symphony, Itel and others included in DB

- Other
Bug fixes and changes according users requests

- Extra
Xiaomi QIN 1S+ supported ( Identify, Repair, Firmware Reading, Reset Settings ) BKey : Call button
Xiaomi QIN 2 supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button
Xiaomi QIN 2 Pro supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button

Special thanks to respected Mr. gracy_elec

https://www.infinity-box.com/news/?r=3950
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.04 - SPD functions improved, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS message extraction for SPD released. Multipart SMS messages are supported
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improvements
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089
Support
Posts: 4178
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.05 - MTK functions for SMS released, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS extraction for MTK activated, supports multipart sms supported as well
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improved
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089
Post Reply