Software Updates and News

Post Reply
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.03 - RDA based firmware images are supported and more

Data extraction based on full reconstruction of file system

- MTK module improvements
- RDA based firmware images are supported
- Show Additional info (IMEIs, User Code) for RDA based firmware images
- GUI improvements
- Minor bugs fixed
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity-Box [BEST] NK2 v1.20 - 220.4G, 2.3 and more !

HMD Nk 220 4G (2019)
Nk 220 4G - TA-1148, TA-1155, TA-1171
- Identify, check securiy
- Reset Settings/Format FS
- Read UserCode
- Backup security

HMD Nk 2.3 Ironman
Nk 2.3 - TA-1206, TA-1209, TA-1211, TA-1214
- Identify
- Flash Firmware
- Reset Settings/Format FS
- Reset FRP

- Base
Loader database updated
ModelFinder updated
Bugfixes and minor changes

- MTK SP
Flash Engine updated
Updated loader database
Nk 2.3 support activated in standalone mode

- SPD FP
SVC engine updated
Nk 220 4G support activated ( partial )
UserCode reading revised
Identify revised

- Support
New firmwares for supported models can be found at support area
New drivers for 105/110/220 can be found at support area
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 and more

- Support for PACv2 format activated
- Core updated
- Protocol updated
- SC9820E support activated ( Generic and Secure types )

- Repair security option activated
Allow repair device security items on generic devices
Work in Flash mode
Work in DiagChan mode
SimLock-enabled devices may NOT work
Security-enabled devices will NOT work

- Firmware Flasher updated
Updated core
Updated PAC types support
Revised NVManager

- Firmware Reader updated
More accurate data verification
Reading speed optimized for some UniSoc models
Android version-depend mode activated ( allow avoid flashing issues on android 9 and newer )
KaiOS devices supported ( SC7731E eMMC, SC9820E eMMC tested and working ) now for Read Firmware

- Identify procedure revised
Now it also support for security verification ( signed NV )
Better FS state verification
More usable build props info extraction

- Revised manual mode selection and possible combinations ( can combine firmware and loader from any source )

- Loader database
SC7715 eMMC loaders included
SC9820 loaders updated
SC9863 loaders updated
SC9820E eMMC loaders included
Various range of models from Wiko, LYF, BLU, BQ, Symphony, Itel and others included in DB

- Other
Bug fixes and changes according users requests

- Extra
Xiaomi QIN 1S+ supported ( Identify, Repair, Firmware Reading, Reset Settings ) BKey : Call button
Xiaomi QIN 2 supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button
Xiaomi QIN 2 Pro supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button

Special thanks to respected Mr. gracy_elec

https://www.infinity-box.com/news/?r=3950
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.04 - SPD functions improved, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS message extraction for SPD released. Multipart SMS messages are supported
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improvements
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.05 - MTK functions for SMS released, Heuristic engine updated

Data extraction based on full reconstruction of file system

- SMS extraction for MTK activated, supports multipart sms supported as well
- Heuristic engine updated - more data can be found/extracted from the unknown dumps
- GUI improved
- Minor bugs fixed

https://www.infinity-box.com/support/?r=100089
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 MTK/Mediatek v2.08 - New models and repair features

As ordinary, uniques functions and methods released.

Please do not forget to download new drivers v5.1632_x86_x64 !

Core:
Changed : Loader v1952 supported and tested
BugFix : Rebuild support for MT6572 line ( KaiOs and old devices )
Changed : Automatic selection of higher available BASE loader at startup
Changed : Automatic protocol switching for RAPHAEL line
Changed : Initial META protocol support
Changed : AutomaticBoot selection revised. More types and combinations are supported.
Changed : Protocol updated for RAPHAEL line

New feature : Meta protocol support activated
!*Support Legacy line ( MT6572 .. MT6595 )
!*Support Raphael line ( MT6750 .. MT6797 )
!*Support Modern Raphael line ( MT6761, MT6765 and newer )

Function : Identify ( AP/MD, SWversion info, Security details )
Function : Reset Settings / Format FS ( NOT touch FRP )
Function : Repair security for
Legacy line ( from MT6572 and up to 6580 )
Raphael line ( from MT6570 to MT6765 etc. )

!*Devices with SLA will not work for repair without auth! ( even if Meta started )
!*Devices with OTP will not work for repair! ( SW will just show write error )

Service:
Changed : Format FS procedure updated
BugFix : Identify procedure updated and revised
Changed : eMMC life counter check ( Raphael, more accurate status handling for latest loaders )

UserData:
Changed : Reset Privacy Locks procedure updated

MemoryTool:
BugFix : Long-run reading optimized for RAPHAEL line

Firmware reader:
Changed : Updated support for legacy platforms
Changed : Updated support for MT6739 FP-like and KaiOS phones
Changed : Local database update
Changed : Data verification improved
Changed : More types supported

Flasher:
BugFix : In some cases were made wrong SV5_BL image selection for EMI base
Changed : Protocol updated for RAPHAEL line
Changed : Protocol update for LEGACY line
BugFix : Flash Erase ( whole mode ) revised
BugFix : Flash Pre-Erase ( safe upgrade mode ) revised

Other:
Changed : Boot helper updated. Take attention to software logs and follow them. In most cases that enough to setup correct settings
New feature : Reboot option activated in main tab. Switch charge / power off mode after operations
New feature : META switch option activated in main tab. Used to switch SW between FLASH and META mode
Changed : Loader database updated
Changed : Minor changes in GUI, check buttons/fields hints to know more about alternative modes and special options of supported functions

Info:
META require working device condition. Charged battery (more than 20%). Installed drivers.
New drivers v5.1632_x86_x64 is at support area.

https://www.infinity-box.com/support/?r=100102
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle-2 MTK/Mediatek v2.09 - SP-unlock for modern platforms and more

As ordinary, uniques functions and methods released

Core
BugFix : SelfLearning ( Automatic Boot Selection ) feature updated
!*In some cases may require repeat learning for some platforms

New Feature : Enter META from BROM mode
!*Support LEGACY legacy
!*Support RAPHAEL line
!*In case of secure fuse, auth can be used ( setup in model selection, or manual select as AUTH file )
!*May not work in TestPoint cases on some platforms

Service
Changed : Repair security procedure updated (Flash and Meta mode)
Changed : SPUnlock procedure updated (Flash and Meta mode)
Changed : Unlock in Meta mode activated for modern platforms ( MT6739 and newer )
Changed : Identify procedure updated

Firmware Reader
Changed : Improved structure identification
Changed : Support more different types
BugFix : Fixed some old platforms support

MemoryTool
Changed : Path Selection now automatically select files in WRITE FILE fields if they are exists in selected folder

Flasher
BugFix : Fixed flashing for old slow platforms ( MT6735 / MT6580 )

Meta protocol functions updated
Changed : Identify now read all Android info, like in FlashMode
!*Feature will not work on old devices ( Android 4.x, MT6572 and similar legacy chip typess )
Changed : Updated security detection feature
BugFix : Updated different Legacy and Modern platforms support
Modem warmup not cause fatal errors on some old phones
Modem-less devices detection ( wifi tablet / smartwatches )
Changed : Format FS revised
*!Some models can not be reset with that feature ( found in some Oppo )
BugFix : Updated structure verification
Changed : Repair Security rebuild, support more types and non-standard cases

New Feature : SP Unlock
Tested and confirmed as working in LEGACY line ( Teseted with MT6735, MT6580, MT6752, MT6753. Should works on other legacy chip types )
Tested and confirmed as working in RAPHAEL line ( Teseted with MT6739, MT6761, MT6755, MT6750. Should works on other Raphael chip types )
We are looking for user reports and interest test cases

Other
BugFix : Some minor changes and bugfixes

https://www.infinity-box.com/support/?r=100104
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.06 - Android contacts/sms support and more

Data extraction based on full reconstruction of file system

- Contacts and accounts reconstrucion from Android storage contacts2.db
- SMS messages reconstrucion from Android storage mmssms.db
- Data storage engine rebuilded
- TXT file storage format updated
- Minor bugs fixed
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Data Explorer v1.07 - SPRD engine rebuilded and more

Data extraction based on full reconstruction of file system

- SPRD engine rebuilded
- contacts save method updated
- long SMS parse method updated
- HTML export released (via templates)
- gui: log autoclear option before new operation
- gui: pop-up menus for log (clear and save options)
- folder with date/time creation for Converter
- Minor bugs fixed
Support
Posts: 1420
Joined: 19 Oct 2011, 20:27
Contact:

Re: Software Updates and News

Post by Support »

Infinity Chinese Miracle II SCR/SPD-RDA v1.06 - New models and features

As ordinary, unique functions and methods released

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC7702 ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC7702
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

Core
NewChip: Support UNISOC 8910 (FLASH) under test
NewChip: Support IVY IoT (FLASH/SVC) under test
Changed: UpToDate Protocol changes for latest FP platforms ( UniSoc )
BugFix: Connection on SPRD tab
BugFix: BOOTROM mode on latest SC6533G branches

Support UNISOC 8910DM / UIS8910 chipset ( SVC mode )
- Identify ( Security info, compilation info, modem info , APinfo )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
!* Generic types only

New Feature: SVC ( Diag ) mode support for SPRD / UniSoc
- Identify ( Security info, compilation info, modem info )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
!* Generic types only

Service
BugFix: Security repair not allow use some "non-standard" combinations ( RDA / SPRD / UniSoc )
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: GUI revised for repair part ( CS info, Automatic complete at double click for security fields )

UserData
BugFix: Security code read in FlashMode revised ( SPRD )

Other
BugFix: Lot of small different changes and fixes
Post Reply