Page 1 of 1

MTK 6877 Supported with Infinity

Posted: 25 Aug 2021, 14:35
by Support
Model/Brand : Oppo Reno 6 CPH2251
Problem: Demo Phone (done by smart reset)


Code: Select all

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM152)
MODE : BOOTROM
PORT : 152
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Montrose
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 34057760511C5BB53B0E2B1DCDC6A7A4
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 67947E6F7D176B75732EFBCCF39DD9A59F2CF1CCDFF78E3E10E1BB1905FABCC0
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6877
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oplus6877.bin
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        UFS: AD014839485131354146414D42444152
        UFS: 
             VEN  : 0x01AD
             VID  : H9HQ15AFAMBDAR
             IFW  : A043
             LU0  : 0x00400000 [ 4.00 MB ]
             LU1  : 0x00400000 [ 4.00 MB ]
             LU2  : 0x1DCB000000 [ 119.17 GB ]
             FSN  : 2018381191E0
             REG  : 0x101010000

        CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0002 , EVOL : 0x0000

        RNID : 86B7CC24C33EA895755E052EBE4E5F49

DA : USB : HIGH-SPEED

Boot done!

Product Board  : oplus6877
Board Platform : mt6877
Product Brand  : alps
Product Device : oplus6877
Product Manfct : alps
Product Model  : oplus6877
Product Name   : vnd_oplus6877

NVRAM : OPLUS6877_20355_MDBIN_PCB01_MT6877_S00.MOLY_NR15_R3_TC16_PR4_SP_V1_P31
NVRAM : 0xA869C1B1
NVRAM : State : Ok!
INFO  : WiFi MAC : A0941AFFA7A1
INFO  : BlTh MAC : A0941AFFA7A0


Backup sensetive data [ 16 ]
Backup path : Backup\MT6877__34057760511C5BB53B0E2B1DCDC6A7A4\
[24] Read : NVRAM
[15] Read : NVDATA
[23] Read : PROINFO
[48] Read : LK
[14] Read : NVCFG
[18] Read : PROTECT1
[19] Read : PROTECT2
[1] Read : PGPT
[17] Read : PERSIST
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : UFS : OK!
STORAGE : OTP Status : UNLOCKED!

Done!
Elapsed: 00:00:31

Code: Select all

Operation : Identify [ v2.28 ]

Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM152)
MODE : BOOTROM
PORT : 152
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Montrose
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 34057760511C5BB53B0E2B1DCDC6A7A4
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 67947E6F7D176B75732EFBCCF39DD9A59F2CF1CCDFF78E3E10E1BB1905FABCC0
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : Configuring target for META

BROM : META configured!

INIT : META confirmed!

Boot done!

AP_CHIP : MT6877
AP_SWTM : Thu Jul  8 12:41:44 CST 2021
AP_SWVR : CPH2251export_11_A.10_2021070819030083
MD_CHIP : MT6877
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.NR15.R3.TC16.PR4.SP.V1.P31
MD_SWVR : OPPO_K6877V1_64_HW
MD_HWVR : Unknown

IMEI[1] : 
IMEI[2] : 
NVRAM saved as : MT6877_1.0_MOLY.NR15.R3.TC16.PR4.SP.V1.P31_OPPO_K6877V1_64_HW.bin

Done!
Elapsed: 00:01:06

Code: Select all

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM152)
MODE : BOOTROM
PORT : 152
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Montrose
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 34057760511C5BB53B0E2B1DCDC6A7A4
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 67947E6F7D176B75732EFBCCF39DD9A59F2CF1CCDFF78E3E10E1BB1905FABCC0
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6877
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oplus6877.bin
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        UFS: AD014839485131354146414D42444152
        UFS: 
             VEN  : 0x01AD
             VID  : H9HQ15AFAMBDAR
             IFW  : A043
             LU0  : 0x00400000 [ 4.00 MB ]
             LU1  : 0x00400000 [ 4.00 MB ]
             LU2  : 0x1DCB000000 [ 119.17 GB ]
             FSN  : 2018381191E0
             REG  : 0x101010000

        CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0002 , EVOL : 0x0000

        RNID : 86B7CC24C33EA895755E052EBE4E5F49

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x8F5654

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:32

Reconnect Power/Cable!

Code: Select all

Operation : HW Report [ v2.28 ]
HWreport : Mode : UFS
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM152)
MODE : BOOTROM
PORT : 152
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Montrose
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 34057760511C5BB53B0E2B1DCDC6A7A4
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 67947E6F7D176B75732EFBCCF39DD9A59F2CF1CCDFF78E3E10E1BB1905FABCC0
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6877
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oplus6877.bin
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        UFS: AD014839485131354146414D42444152
        UFS: 
             VEN  : 0x01AD
             VID  : H9HQ15AFAMBDAR
             IFW  : A043
             LU0  : 0x00400000 [ 4.00 MB ]
             LU1  : 0x00400000 [ 4.00 MB ]
             LU2  : 0x1DCB000000 [ 119.17 GB ]
             FSN  : 2018381191E0
             REG  : 0x101010000

        CHIP : MT6877 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0002 , EVOL : 0x0000

        RNID : 86B7CC24C33EA895755E052EBE4E5F49

DA : USB : HIGH-SPEED

Boot done!

Memory Info : 
    CID : H9HQ15AFAMBDAR

EXT_CSD Info : 

[UFS] Device Desc:
[UFS] life cycle check, pre_eol_info=1, life_time_est_a=1, life_time_est_b=1
[UFS] vendor id: 0x1ad
[UFS] ufs id: H9HQ15AFAMBDAR
[UFS] ufs fwver: A043
[UFS] ufs serial number: 2018381191E0
[UFS] dev_quirk = 0x10000000
[UFS] Custom force provison=0, TW size=-1GB, TW no red=1, HPB size=-1GB
[UFS] info: number of active LU: 3, check OK.
[UFS] info: number of Boot LU: 2, check OK.
[UFS] info: LU Configuration Check OK. Bootable UFS
[UFS] info: Boot LU Configuration Check OK. Active Boot LU: LU0
[UFS] Sense Data: ASC=29, ASCQ=2
[UFS] Sense Data: ASC=29, ASCQ=2
[UFS] Sense Data: ASC=29, ASCQ=2
[UFS] Sense Data: ASC=29, ASCQ=2
[UFS] info: RX HS-G3, setting is4
[UFS] info: TX HS-G3, setting is4
[UFS] info: HS-G3-2

Overall status : 

    MLC status : 0% - 10% used
    SLC status : 0% - 10% used
    EOL status : Normal  ( Less than 80% reserved blocks used )


    RPMB : RPMB  KEY NOT set! [State : CLEAN : USABLE]


    STORAGE : OTP Status : UNLOCKED!


Done!
Elapsed: 00:00:17
Image
Image

Thanks to Vikas for being helpfull :)