Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone auth ON

[Support]

Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone auth ON

As ordinary, unique functions and methods released

Core
Changed : Protocol updated ( Raphael/Legacy )
NewFeature: Standalone SLA/Auth [Raphael] **
Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild

Flasher
Changed: Core updated for RAPHAEL line
Changed: UltraFlash feature updated, new security workarounds supported

Service
Changed: Identify
!* Read new Android 10 specific fields, vendor-specific fields
Changed: Smart Reset
!* Optimized support for different customized and generic cases

Changed: HW Report ( RAPHAEL - only )
!* UFS line devices now supported with following features:
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
- Partitioning details and other
- HWreport log saving enabled ( for further analyze )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !

Firmware Reader
Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme )
Changed : New types supported

Other
BugFix : Many different minor changes and fixes
Changed : Generic protocol rebuild

Info
!**
- Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support
- You can boot ( with supported SoC ) device with any generic da and perform any need operations
- Support MT6765 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
- Support MT6785 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing

NOTE: special boot-helper tool should be installed - included in CM2MT2 package

https://www.infinity-box.com/support/?r=100139

[000914A658]

Cph1979 da file need

[Support]

Cph1979 da file need

Please always copy/paste software operation text.

[000914A658]

Mediatek MT6779 Helio P90 (12 nm) supported or not supported

[000914A658]

Card found : 0914A658 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.17

Load IDBase v125162 Ok!

Update configuration ...
Update Ok!
Load IDBase v125162 Ok!

Operation : Identify [ v2.17 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM103)
MODE : BOOTROM
PORT : 103
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 63E133296D7D61D14F4C5D061B3FD75F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Disabled
BROM : SOCID : 7CE7E1F066A28223695A496EE13F5BAB839DD7D47F5969898234CC8D5A54C417
BROM : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin

AGENT : Selected AGENT doesn't have required configuration!
>>> Check and select CORRECT SETTINGS for your device!

Reconnect Power/Cable!

[000914A658]

what problem
my smart card misconfiguration ! contact to support
what happen

[000914A658]

If no solution make change activation i have best cm2 serial

[Support]

Mediatek MT6779 Helio P90 (12 nm) supported or not supported

Just try your phone and see result.
Waiting for your operation text !

[Support]

what problem
my smart card misconfiguration ! contact to support
what happen

Hello,

- Connect dongle/box to PC
- Run DongleManager.exe - https://www.infinity-box.com/support/?r=5
- Make "Read Serial Number (S/N)"

DO NOT send screenshot/video but copy/paste text from software window !

[Support]

If no solution make change activation i have best cm2 serial

Hello,

- Connect dongle/box to PC
- Run DongleManager.exe - https://www.infinity-box.com/support/?r=5
- Make "Read Serial Number (S/N)"

DO NOT send screenshot/video but copy/paste text from software window !

[000914A658]

Mediatek MT6779 Helio P90 (12 nm) supported or not supported

Just try your phone and see result.
Waiting for your operation text !

Card found : 0914A658 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.18

Load IDBase v125162 Ok!


Operation : Reset Settings/Format FS [ v2.18 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM103)
MODE : BOOTROM
PORT : 103
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 63E133296D7D61D14F4C5D061B3FD75F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 7CE7E1F066A28223695A496EE13F5BAB839DD7D47F5969898234CC8D5A54C417
BROM : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

[Majid Bhatti]

dongle misconfigration error

[Support]

Mediatek MT6779 Helio P90 (12 nm) supported or not supported

Just try your phone and see result.
Waiting for your operation text !

Card found : 0914A658 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.18

Load IDBase v125162 Ok!


Operation : Reset Settings/Format FS [ v2.18 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM103)
MODE : BOOTROM
PORT : 103
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 63E133296D7D61D14F4C5D061B3FD75F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 7CE7E1F066A28223695A496EE13F5BAB839DD7D47F5969898234CC8D5A54C417
BROM : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Make sSLA box checked

[Support]

dongle misconfigration error

Hello,

- Run DongleManager.exe - https://www.infinity-box.com/support/?r=5
- Make "Read Serial Number (S/N)"

DO NOT send screenshot/video but copy/paste text from software window !